开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. QRPLabs
  2. Topics

Another QMX+ became SSB capable

 

开云体育

Kudos to Hans - the beta was well worth the wait!
Thanks again to the folks that helped me earlier this year locate and replace the bad switch. I had not used the little beast that much after confirming the repair, mostly due to time commitments. Did get some good reports on CW, then shelved it until firmware beta 1-01-003 that covered SSB was dropped.
The firmware upgrade was straight forward. I constructed two Mic adapters, one for a spare ICOM HM-219 and one for a Heil ProSet Elite iC. Both worked well without adjustments of any kind.
First voice QSO was this afternoon on 40M with VA3XV up in Ontario (about 400+ miles). He reported the audio to be as very nice, as good as my 7610. The QMX+ even received a 54 sig report when the QSB and adjacent frequency QRM was not present.
Next up configuring it for fldigi - FSQ and other digital modes... and of course portable ops. So far this has proved an excellent and surprisingly full featured little rig.
--
Jack Spitznagel
KD4IZ FM19oo
Parkton, MD
 

Hi Jack,
?
Did you go through the calibration cycle or just run with default calibration settings?
?
It's just that I can get my QMX+ to do a complete successful calibration run and resulting in distorted audio.
Running the rig with default calibration settings (returned it to factory default settings), I don't get audio distortion, but mic volume is low. Increasing the mic gain then generates undesirable background noise. But that's a desperate challenge is need to resolve...
?
Cheers,
?
Mel. M0KMD
 

One thing I've noticed is that the Transmit EQ has a default Global Gain of -20.? Setting this to 0 seems to help with the gain.
 

Hi Jack,
I also have a Heil ProSet Elite iC headset. Would you be willing to provide your adapter wiring details?
Thanks
Errick
N9DWD
?
 

Hi Jack
I see your ICOM microphone has 2 buttons on top !
Would that be an option to wire them in to the 2 on front of QMX+ ??
Or not useful.....
?
Cheers
Gert
 

Mel,
I just loaded the firmware. No adjustments yet. The voice QSO’s did not think the audio drive to be low with the HM-219 or the headset.
--
Jack
KD4IZ
FM19OO
 

Hi Gert,
No idea! It would be interesting to have freq up/down from the mic but require surgery I don’t want to contemplate.
--
Jack
KD4IZ
FM19OO

1 - 7 of 7