QCX+ R10 not on PCB

Andre Thomas All Messages By This Member #95800 Hi I am busy building the QCX+ kit and noticed that R10 mentioned in the circuit diagram and board layout from the manual is not on the PCB I have (Rev 4). Is it supposed to be soldered into the same holes as C7 or is it intentionally excluded/removed ? Thanks
Ronald Taylor All Messages By This Member #95802 Andre, R10 is there. It is just above IC5 asin this picture of the board layout from the Rev 4 instructions. Good luck ... 73 .. Ron toggle quoted message Show quoted text On Sat, Dec 3, 2022 at 7:26 AM <andre1024@...> wrote: Hi I am busy building the QCX+ kit and noticed that R10 mentioned in the circuit diagram and board layout from the manual is not on the PCB I have (Rev 4). Is it supposed to be soldered into the same holes as C7 or is it intentionally excluded/removed ? Thanks
Andre Thomas All Messages By This Member #95813 hihi thanks Ronald, I found it... I somehow managed to shift the opamp one digit to the right :) All sorted now!

开云体育