开云体育

Use original IC! displayed on QCX 20m

#chat

[email protected] #26291 A new chat has been created: I attempted to upgrade the firmware on my QCX 20m from 1.00e to 1.00f.? I am using the instructions from "How to update the firmware on the QCX using an arduino uno and AVRDUDESS".? Something went wrong and now I get the display "Use original IC!".? I tried updating the firmware again this evening with the following output from Avrdudess: T1.00f.hex: 0 / 32,768 Bytes (0.00%) ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~? ? avrdude.exe: AVR device initialized and ready to accept instructions ? Reading \| ################################################## \| 100% 0.01s ? avrdude.exe: Device signature = 0x1e950f avrdude.exe: NOTE: "flash" memory has been specified, an erase cycle will be performed ? ? ? ? ? ? ?To disable this feature, specify the -D option. avrdude.exe: erasing chip avrdude.exe: reading input file "C:\Users\John\Documents\QRP Labs\QCX CW Tranceiver\T1.00f.hex" avrdude.exe: input file C:\Users\John\Documents\QRP Labs\QCX CW Tranceiver\T1.00f.hex auto detected as Intel Hex avrdude.exe: writing flash (32076 bytes): ? Writing \| ################################################## \| 100% 34.95s ? avrdude.exe: 32076 bytes of flash written avrdude.exe: verifying flash memory against C:\Users\John\Documents\QRP Labs\QCX CW Tranceiver\T1.00f.hex: avrdude.exe: load data flash data from input file C:\Users\John\Documents\QRP Labs\QCX CW Tranceiver\T1.00f.hex: avrdude.exe: input file C:\Users\John\Documents\QRP Labs\QCX CW Tranceiver\T1.00f.hex auto detected as Intel Hex avrdude.exe: input file C:\Users\John\Documents\QRP Labs\QCX CW Tranceiver\T1.00f.hex contains 32076 bytes avrdude.exe: reading on-chip flash data: ? Reading \| ################################################## \| 100% 19.54s ? avrdude.exe: verifying ... avrdude.exe: 32076 bytes of flash verified ? avrdude.exe done.? Thank you. It is my understanding that I may need the eeprom (eep) file in addition to the hex file to remedy this problem.? And perhaps the suggested fuse settings as well.? Last evening I sent Hans a request for the eep file along with any suggestions he may have.? If anyone has access to the eep file and the recommended fuse settings, I certainly would appreciate it. 73 John KF6QPC View/Join This Chat
Hans Summers All Messages By This Member #26293 Hi John I will email you off-list.? 73 Hans G0UPL toggle quoted message Show quoted text On Thu, Aug 23, 2018 at 9:17 AM <j.capel@...> wrote: A new chat has been created: I attempted to upgrade the firmware on my QCX 20m from 1.00e to 1.00f.? I am using the instructions from "How to update the firmware on the QCX using an arduino uno and AVRDUDESS".? Something went wrong and now I get the display "Use original IC!".? I tried updating the firmware again this evening with the following output from Avrdudess: T1.00f.hex: 0 / 32,768 Bytes (0.00%) ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~? ? avrdude.exe: AVR device initialized and ready to accept instructions ? Reading \| ################################################## \| 100% 0.01s ? avrdude.exe: Device signature = 0x1e950f avrdude.exe: NOTE: "flash" memory has been specified, an erase cycle will be performed ? ? ? ? ? ? ?To disable this feature, specify the -D option. avrdude.exe: erasing chip avrdude.exe: reading input file "C:\Users\John\Documents\QRP Labs\QCX CW Tranceiver\T1.00f.hex" avrdude.exe: input file C:\Users\John\Documents\QRP Labs\QCX CW Tranceiver\T1.00f.hex auto detected as Intel Hex avrdude.exe: writing flash (32076 bytes): ? Writing \| ################################################## \| 100% 34.95s ? avrdude.exe: 32076 bytes of flash written avrdude.exe: verifying flash memory against C:\Users\John\Documents\QRP Labs\QCX CW Tranceiver\T1.00f.hex: avrdude.exe: load data flash data from input file C:\Users\John\Documents\QRP Labs\QCX CW Tranceiver\T1.00f.hex: avrdude.exe: input file C:\Users\John\Documents\QRP Labs\QCX CW Tranceiver\T1.00f.hex auto detected as Intel Hex avrdude.exe: input file C:\Users\John\Documents\QRP Labs\QCX CW Tranceiver\T1.00f.hex contains 32076 bytes avrdude.exe: reading on-chip flash data: ? Reading \| ################################################## \| 100% 19.54s ? avrdude.exe: verifying ... avrdude.exe: 32076 bytes of flash verified ? avrdude.exe done.? Thank you. It is my understanding that I may need the eeprom (eep) file in addition to the hex file to remedy this problem.? And perhaps the suggested fuse settings as well.? Last evening I sent Hans a request for the eep file along with any suggestions he may have.? If anyone has access to the eep file and the recommended fuse settings, I certainly would appreciate it. 73 John KF6QPC View/Join This Chat
Kelly Jack All Messages By This Member #26294 Hans, Please let me know if the instructions need updating. 73 Simon VK3ELH?
Alan G4ZFQ All Messages By This Member #26295 Please let me know if the instructions need updating. Simon, I suspect John needs to tell us whether he obeyed "2) Program only the provided .hex file (see above); do not change the Fuse settings, or other memories (e.g. EEPROM)" 73 Alan G4ZFQ
Alan G4ZFQ All Messages By This Member #26296 Alan G4ZFQ wrote: I suspect John needs to tell us whether he obeyed "2) Program only the provided .hex file (see above); do not change the Fuse settings, or other memories (e.g. EEPROM)" Simon, Sorry, I did not realise they are your instructions. I do not use Averdudess but I see you have EEPROM "Write" ticked on your illustration. But maybe that does not matter as nothing below is ticked? 73 Alan G4ZFQ

Previous Topic Next Topic