¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. QRPLabs
  2. Topics

QLG2 GPS

 

I plan to build a QLG2 GPS Receiver Module to use it with my QCX+
I will add:
- the blue LCD accessory kit;
- the Customized case kit (enclosure).
I guess I will have to order it with the "Front blank cut/drilled plate.
But what rear plate will I have to order?
I might better build the Clock kit with its enclosure and the QLG2 GPS but will the GPS be inside the Clock enclosure??
73 - Pierre - FK8IH
 

Pierre,
why go to all the extra cost when you could just fit a QLG3 module within the QMX+ and use the external GPS antenna? You can display GPS information on the QMX screen.
73 Ken G4apb?
 

Ken, I don't have a QMX, I have a QCX+ and the only GPS I could run is the QLG2.
73 - Pierre - FK8IH
 

The GPS board will fit nicely inside the standard QCX case although you will need to do some careful measuring and drilling. ?
You also need to add a switch on the two data lines (low current gold contacts ideally) as the gps signal data interferes with key/paddle signals in some modes?
 

Built in?
GPS. ?
Switch On for Cal /WSPR/ Digi/ beacon. Off otherwise?
Audio/ Speaker
Additional cooling and power supply tweaks?
a few other things?
?
?
 

Bruce, what GPS board do you mean? The QLG2?
73 - Pierre - FK8IH
 

Yes that¡¯s the QLG2 in there with back up capacitor installed?

1 - 7 of 7