开云体育

I've been going thru the posts here and have not seen setting for the QMX+ and WSJT-X ? any help would be great

QMX+ and QMX are identical when it comes to WSJT-X.

Just type WSJT-X into the message search bar, and you will come up with lots of messages regarding WSJT-X settings.

But first read the QMX operations manual - it has a section for WSJT-X, with screenshots that have the necessary settings.

Make sure you set all of the settings as indicated on the radio config screenshot, not just the circled ones (Mode and Split control settings are important).

Access the operations manual on the QMX main page at qrp-labs.com - just scroll down the page.

Stan KC7XE

if you are still with the non SSB software you can only use the COM Port once. So WSJT-x will not find the QMX, when the Com port is used i.e. for a logging programm. Not a big deal as the logging software can get the logging data from WSJTX.? I have not dared to upload the SSB update but I understand that there are 3 possible Com ports so you can use one for WSJTX and one for whatever else.

?

I am using TS 480 in the WSJTX setup on WSJTX improved

?

Martin

DK3UW