开云体育

qmx+ ssb fldigi psk31 - won't transmit

lars anderson All Messages By This Member #141374 hi all, running 1.01.003, can still run ft8 using digi via wsjtx as before no problems but running fldigi, trying to run psk31 - radio is going to usb, tune/transmit have no effect. (i believe i have volume all the way up (and not sure that's even required with SSB anymore) i'm monitoring power level through a separate device - nothing going out.? i still have modem tty tx shaping off for rtty, and i have turned off txid, but i am missing something. receive is fine, all basic configs are in place, and i did have rtty working last week using digi via fldigi. it's some difference in trying to use ssb mode i don't understand (yet). apologies in advance for what must be a newbie question. any help appreciated! r/lars.
mux_folder2001 All Messages By This Member #141375 开云体育 Not sure but maybe try setting the mic source to USB instead of ext mic. Tony AD0Vc toggle quoted message Show quoted text From: [email protected] <[email protected]> on behalf of lars anderson via groups.io <larski@...> Sent: Saturday, March 22, 2025 10:40 AM To: [email protected] <[email protected]> Subject: [QRPLabs] qmx+ ssb fldigi psk31 - won't transmit ? hi all, running 1.01.003, can still run ft8 using digi via wsjtx as before no problems but running fldigi, trying to run psk31 - radio is going to usb, tune/transmit have no effect. (i believe i have volume all the way up (and not sure that's even required with SSB anymore) i'm monitoring power level through a separate device - nothing going out.? i still have modem tty tx shaping off for rtty, and i have turned off txid, but i am missing something. receive is fine, all basic configs are in place, and i did have rtty working last week using digi via fldigi. it's some difference in trying to use ssb mode i don't understand (yet). apologies in advance for what must be a newbie question. any help appreciated! r/lars.
[email protected] All Messages By This Member #141376 Here are some of my fldigi settings... maybe they will be of assistance to you. ? Ensure 0.0 area is high enough. ? For awhile mine was -10.0 and I was not getting much power out. ? Sound: ? Rig: ?
lars anderson All Messages By This Member #141380 Thank you both! one of the settings on the rig control page did it - am transmitting now! i had found the mic source setting earlier, but by itself it wasn't enough. i apreciate the help regards lars/kn5ute
Ian G4GIR All Messages By This Member #141381 开云体育 Hello Lars, Can you tell us which settingdid it? ? 73 ? Ian G4GIR ? toggle quoted message Show quoted text ----- Original Message ----- From: lars anderson via groups.io <larski@...> Reply-To: <[email protected]> To: <[email protected]> Sent: 22/03/2025 17:55:18 Subject: Re: [QRPLabs] qmx+ ssb fldigi psk31 - won't transmit Thank you both! one of the settings on the rig control page did it - am transmitting now! i had found the mic source setting earlier, but by itself it wasn't enough. i apreciate the help regards lars/kn5ute
lars anderson All Messages By This Member #141383 unfortunately no! i don't recall what i had there before but i am pretty sure it was either timeout or post write delay on hamlib rig control window.?? i will go back & try to re-create my issue. if i am successful in isolating the fix, i will post it here.? ?
Ian G4GIR All Messages By This Member #141384 开云体育 Thanks Lars. ? Would be good to know for future reference. ? 73 ? Ian G4GIR ? toggle quoted message Show quoted text ----- Original Message ----- From: lars anderson via groups.io <larski@...> Reply-To: <[email protected]> To: <[email protected]> Sent: 22/03/2025 19:06:16 Subject: Re: [QRPLabs] qmx+ ssb fldigi psk31 - won't transmit unfortunately no! i don't recall what i had there before but i am pretty sure it was either timeout or post write delay on hamlib rig control window.?? i will go back & try to re-create my issue. if i am successful in isolating the fix, i will post it here.? ?

Previous Topic Next Topic