开云体育

The power level is not dropping, however when I look at my WSPR contacts the next morning on 20 meters there are hardly any!

?

If I switch to Reversebeacon.net and transmit CW there are contacts all over!

?

What could change (besides the band conditions which I doubt that's the problem) to have this happen?

I am using the internal Satellite Module which seems to be working fine.

?

73's Michael N2ZDB

Hi Michael,

What freq are you using on WSPR?

The one you entered in the Beacon menu. There has got to be a reason.

How many volts are supplying the radio because at full power you should have hundreds of spots. I tested using WSPR in beacon mode on several bands with QMX+ and it is working for me. If possible try

WSJT-X on WSPR and see if that works.

73,

George?

?

?

My guess is your rig has slipped outside the narrow wspr passband. Been there myself. Or clock is off. Hang in there and you can solve it.?

?

Curt

?

Michael there may be a problem with the WSPR server again. I just had no spots on 30, which I use to check propagation and I checked power output, timing, and Freq. and they all are normal. So maybe it's not you or me, but it!

?

I just checked again. The site is working. So try again and see if the

Results are the same.?