开云体育

CAT script for setting the real-time clock

Michael, DL6MAF All Messages By This Member #114619 开云体育 Hi there! Hans has already indicated that the real-time clock in the QMX could be set using a CAT command script, has anyone succeeded in doing so? I just checked a CAT command reference for the TS-480 but didn't find any suitable command there ... 73, Mike
Hans Summers All Messages By This Member #114621 Hi Mike QMX CAT is based on TS-480 but isn't exactly the same. The commands QMX understands are listed in the operating manual. As yet there isn't a way to set the real time clock, I'll add it. 73 Hans G0UPL toggle quoted message Show quoted text On Sat, Dec 9, 2023, 6:57?PM DL6MAF <michael.fuchs@...> wrote: Hi there! Hans has already indicated that the real-time clock in the QMX could be set using a CAT command script, has anyone succeeded in doing so? I just checked a CAT command reference for the TS-480 but didn't find any suitable command there ... 73, Mike
[email protected] All Messages By This Member #115019 With the QCX+ the real time clock could be set manually in the beacon menu. With the QMX it can only be done using a GPS module or through a CAT command? I guess there will be a good reason why the option of setting the clock manually through the beacon menu has disappeared, but I do regret this. I don't know (yet) how the CAT method works and using the GPS may result in having to wait several minutes before the GPS signal has properly synchronised and implemented the GPS leap seconds. Therefore, I would love to have the manual time set back...
Hans Summers All Messages By This Member #115020 It just isn't done yet. No good reason as such... And there isn't yet a CAT command for it either.? 73 Hans G0UPL toggle quoted message Show quoted text On Sat, Dec 16, 2023, 6:10?PM <ha7rja@...> wrote: With the QCX+ the real time clock could be set manually in the beacon menu. With the QMX it can only be done using a GPS module or through a CAT command? I guess there will be a good reason why the option of setting the clock manually through the beacon menu has disappeared, but I do regret this. I don't know (yet) how the CAT method works and using the GPS may result in having to wait several minutes before the GPS signal has properly synchronised and implemented the GPS leap seconds. Therefore, I would love to have the manual time set back...
[email protected] All Messages By This Member #118865 The QMX firmware version1_00_015 and up implement the?CAT command TM for get/set of real time clock. I created a small powershell script for windows to set the time (see?). 73 Stephan HB9CHM
Tom All Messages By This Member #124195 Awesome - i know this is two years old, but I just got my QMX and wrote a bash script for Linux toggle quoted message Show quoted text DT=$(date +%H%M%S)? # Returns as HHMMSS echo -n -e "TM$DT"";" >>/dev/ttyACM0 # set time on serial port - for me is ACM0

Previous Topic Next Topic