¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. QRPLabs
  2. Topics

QMX new build - not able to short press

 

I've just built my first QMX, the firmware install went ok and it appears to boot fine. ?I am finding that the buttons and the clicks of the rotary encoders are all registering as long-presses. ?Can someone suggest what I should do to track where I've gone wrong? ?Visually (under a microscope) all solder joints appear good and I have not been able to locate any shorts.
 

Hello Andy

I suggest a factory reset, the EEPROM setting for the long-press delay could somehow be 0 instead of the normal default 300ms.?

If you can't achieve that in the menu, due to the issue, then I think you should be able to connect a terminal session on your PC using PuTTY.

73 Hans G0UPL



On Wed, Oct 18, 2023 at 6:41?PM Andy M0VVA via <m0vva=[email protected]> wrote:
I've just built my first QMX, the firmware install went ok and it appears to boot fine.? I am finding that the buttons and the clicks of the rotary encoders are all registering as long-presses.? Can someone suggest what I should do to track where I've gone wrong?? Visually (under a microscope) all solder joints appear good and I have not been able to locate any shorts.

 

Thanks, Hans. ?
Yes, that was it. ?I was wondering why all the configuration items had zero values. ?Now it is working as expected! ?Fabulous.
73 Andy M0VVA

1 - 3 of 3