开云体育

I think we've all had the Magic Smoke Blues at some point or another. I downloaded it as an MP4 file. Saved for posterity, lol Thanks for sharing 72 Mark

Hello Nick, Bill here N3GTY On the RPi5 I was not able to get CAT working also kept getting HamLib errors. Until I changed PTT to VOX on both the QDX and WSJT-X Software. This problem also existed on

Which tuner are you fitting in the case? -- Wayne S. KF7RCM

Howard, this microphone won't work. You need the standard 2-terminal element. The + side of that element goes to the Ring (Mic). The - side of it goes to Sleeve (Gnd). A push button PTT switch

Yes. ?You need a QRPLABS encrypted boot loader programmed on the CPUs. ?I have some on hand for the repairs that I do. ?Ask Hans if he has one he would sell to you. when soldering in a new chip, I

Update I reverted to a Rpi 4 and with that the CAT Test turns Green unlike the RPI 5 Pressing Tune on WSJT-x produces a signal using the RPi 4 but not on the RPi 5 Has anyone managed to get the RPi 5

Muhsin et al, Aside from the resonance issue on the standard wound Bn43-202, the tighter coupling and symmetrical winding also will improve the balance and thus 2nd harmonic. It works ok down to 160m

When SSB is implemented on the QMX I want to be ready. I have a vintage in new condition RadioShack electric condenser microphone element. on the illustration for the mic I believe the middle wire

Thanks for your input, George and Mike. George, being easier to build is definitely a big advantage of the QMX+. Mike, very good point about the extra space in the larger enclosure. I guess as more

Hi Jeff, I wanted to give you an update since your previous post was so helpful.? You may remember this issue from back on June 30.? I've been letting this QMX+ get the better of me.? I did prove

Yes, sorry George, I misunderstood the issue you have. I was using two instances for the WSJT-X, one for the QDX high and the other one for the QMX (+). It is obviously not your case. -- 73 Bojan

Hi Karl Also BN43-202 had some bad resonant areas with the old winding. switching to BN61-202 and RWTST improved all my QDXs and QMXs on all bands (you might need BN43-202 on 160 meters and lower?) 73

My .02 on the RX side is nothing new and really is a simplified version of softrock RX without the PC as the pi does the work.? its a simple and compact implementation where using the Rpi Pico. The

http://qrp-labs.com/ultimate3/u3s.html

Hans, You might find this interesting. The chap has implemented an SSB, FM and AM RX on a Raspberry Pi Pico which has a dual core ARM Cortex M0+ processor. https://github.com/dawsonjon/PicoRX He has a

I have parts for the Ult6imate 3s that I would like to assemble with the transmitter and receiver in the box.? is there any place that shows how this is done.? Yes I know "why: Because,? I have the

Slightly different story here. VDD is showing 20Ω to ground without the PS boards installed. I decided to apply about 2.5 V to the VDD pin to which PS Board #2 attaches. Current consumption was 250

Tnx Bojan. I took a look, but still confused because I want only 1 instance. So I am not asking for a second instance. I guess I can go to task manager and end an app., but I wondered if there were

Hi, perhaps this info can help you: https://gm4fvm.blogspot.com/2021/02/multiple-instances-of-wsjt-x-using-more.html I am using multiple instances in Win10 but each instance than uses different

It is 2.6.1 downloaded direct from repository