KEN G4APB <lfoofui.nbz42@...> wrote:
But, pressing either p or t only gives me a brief transmission, not long
enough to actually do any measurements with. Am I doing something wrong
here? Would be nice if it stayed on transmit until The CAT timeout
occurred.
If you're connecting via VNC to raspi and can't just press and hold p or
t, try this:
1. Use PuTTY on the local machine to connect to the raspi via ssh
2. Install minicom on raspi
3. Use it to connect to QDX from the console (over ssh)
Or:
1. Install libhamlib-utils
2. Use rigctl to connect to QDX
rigctl commands:
- set frequency: f <freq in Hz>
- enable transmitting: t 1
- switch back to receiving: t 0
