On Mon, Nov 15, 2021 at 01:44 AM, syuji ota wrote:
However, when the Linux or Windows systems sends <CR> without user permission,
QDX goes into terminal application mode and USB audio is stops.
If so, can you change the command to enter terminal application mode?
This is interesting, but I was able to enter the QDX menu system while watching the spectrum with baudline, and the audio never stops when I pressed enter and entered the menu. Was also able to send CAT commands, the audio only changes when going between RX/TX.
I checked with the following commands:
serial console:
minicom -D /dev/serial/by-id/usb-QRP_Labs_QDX_Transceiver-if00 -c on
baudline:
parec --format=s16le --channels=1 --latency-msec=5 | ./baudline -stdin
