Hello Hans,
?
Thank you for your help.
?
N1MM features the usual contest modes Run and Search and Pounce (S&P).
?
In S&P mode? and engaging the RIT on the radio, nothing happens using the CAT Monitor in PuTTY.
In N1MM the frequency can be changed by either using the keyboard up / down keys or the mouse wheel. Tuning withe the up / down keys is not effected.
RIT can be controlled from the radio, no problem.
?
In RUN mode and RIT on, the up or down key changes the frequency 10 Hz and no more, irrespective of the RIT tuning step setting.
The CAT monitor receives this: RD00010;? The LCD frequency read-out on the LCD changes from - 0.010 to +0.010 and vica versa.
It looks like the N1MM / QMX+ communication in RUN mode is restricted with RIT on.
?
Furthermose, in RUN and RIT on, after using the up / down keys, RIT can not be switched off on the radio. Reverting in N1MM to S&P this works again.
?
N1MM has been set for the TS480 protocol.?The N1MM documentation says that RIT is supported on radio's that support RIT in CAT, e.g. the KX3.?
?
I hardly use RUN mode as S&P is much more interesting for contesting with QRP.
The QMX+ is a very good CW contest machine, due to the excellent QSK and CW filters.
?
Roelof, pa0rdt
?
?
?
?
