开云体育

[QueenCreekHams] GMRS Repeater Test

Mike - N7MJF All Messages By This Member #1201 My HT's that I'm programming only supports 107.2 for the Tone Encode, the next Frequency up or down are 103.5 (down) and 110.9 (up).?? One HT is an actual GMRS radio (Radioddoty GM-30) the other is a dual-band ham radio (TYT TH-UV88). I suspect you meant 107.2 Hz for the GMRS Repeater encode Frequency.? toggle quoted message Show quoted text On Fri, Mar 21, 2025 at 3:00 PM, Joe Sammartino via groups.io <jsammartino@...> wrote: The correct pl is 107.3 On Fri, Mar 21, 2025, 12:45 PM Joe Sammartino <jsammartino@...> wrote: Help! Hello Ham Friends, If you have a GMRS license, please access my temporary repeater at: Transmit Frequency:? 467.5750 MHz Receive Frequency:? 462.5750 MHz PL Tone Encode:? 107.5 Hz PL Tone Decode:? None It is located at 202 and Broadway with an ERP of about 8 watts. It does not have a transmitted ID yet and there is no activity timer.? However, it is operating under WRJA748. When accessing, please announce testing and your callsign or the last 3 numbers of your call sign so I map your location to determine the RF operating footprint of the test session. If you do not have a GMRS call sign, use mine for testing purposes:? WRJA748 I need it tested thoroughly today for deployment at an event tomorrow. It will be up from 12:45 PM till Midnight tonight.? The activity will be recorded for my review.? Thank you, Joe, N2QOJ
N3BZ All Messages By This Member #1202 开云体育 Greetings, ? Had the same thought on the tone … programmed it in anyway but no response. Didn’t see a lot of action either from the SDR. ? toggle quoted message Show quoted text From: QCECG@groups.io <QCECG@groups.io> On Behalf Of Mike - N7MJF via groups.io Sent: Friday, March 21, 2025 3:18 PM To: QueenCreekHams@groups.io; queencreekhams <queencreekhams@groups.io>; qcecg <qcecg@groups.io> Subject: Re: [QCECG] [QueenCreekHams] GMRS Repeater Test ? My HT's that I'm programming only supports 107.2 for the Tone Encode, the next Frequency up or down are 103.5 (down) and 110.9 (up).?? ? One HT is an actual GMRS radio (Radioddoty GM-30) the other is a dual-band ham radio (TYT TH-UV88). ? ? I suspect you meant 107.2 Hz for the GMRS Repeater encode Frequency.? ? ? ? ? On Fri, Mar 21, 2025 at 3:00 PM, Joe Sammartino via groups.io <jsammartino@...> wrote: The correct pl is 107.3 ? ? ? On Fri, Mar 21, 2025, 12:45 PM Joe Sammartino <jsammartino@...> wrote: Help! ? Hello Ham Friends, ? If you have a GMRS license, please access my temporary repeater at: ? Transmit Frequency:? 467.5750 MHz Receive Frequency:? 462.5750 MHz PL Tone Encode:? 107.5 Hz PL Tone Decode:? None ? It is located at 202 and Broadway with an ERP of about 8 watts. ? It does not have a transmitted ID yet and there is no activity timer.? However, it is operating under WRJA748. ? When accessing, please announce testing and your callsign or the last 3 numbers of your call sign so I map your location to determine the RF operating footprint of the test session. ? If you do not have a GMRS call sign, use mine for testing purposes:? WRJA748 ? I need it tested thoroughly today for deployment at an event tomorrow. ? It will be up from 12:45 PM till Midnight tonight.? The activity will be recorded for my review.? ? Thank you, ? Joe, N2QOJ

Previous Topic Next Topic