开云体育

From: "Ralph ralphm-kg8wl@... [N7XGlogsupport]" <N7XGlogsupport@...>
Sent: Saturday, April 30, 2016 6:13 AM
To: "Dean Davis' dean@... [N7XGlogsupport]" <N7XGlogsupport@...>
Subject: RE: [N7XGlogsupport] Re: Locking Up [1 Attachment]

Dean,
I am running a Gateway model NE56R laptop w/ Intel Pentium CPU B950@ 2.10 Ghz. It has 4.00GB RAM (3.84 GB usable). It's a 64-bit operating system, x64-based processor. My C: Drive shows 82.7 GB used out of 465 GB. The operating system is Windows 10 Home.
I have had instances in the past where I would download FCC Update, and the message was that everything was OK, but if I tried to open View/FCC Data I got a blank window (window opened up normally but all lines blank), haven't seen that in quite some time, assuming that problem has been corrected. But on account of that there is still a sense of trepidation when downloading Update.
As to what I'm doing when the logger stops working, I have no clue, since I don't know when it stops. All I can tell you is that if I close the program it seems to be a low percentage of the time that it will re-open. Usually no other programs open that might be affecting anything.
As to opening fccversion.txt, I believe that has already been done. If that that's the one that comes up in notepad with just the 3-didit identifier, I've checked that (even tried to edit it to different number to see if that would allow Update!) and it displays the number of current FCC version. However, The reason I ran the update was because someone checked in with a call that did not appear in the FCC version that I had loaded. I ran the update and that particular call came up in the database just fine, until I closed the program and tried to re-open. I ran Set Up Wizard and got program to open, but that particular callsign does not appear in the database, but if I try to download update I get the message that I already have the latest version (??????).
Anything else you need to know?
Appreciate any assistance,
73's, Ralph KG8WL


From: 'Dean Davis' dean@... [N7XGlogsupport]
Sent: Friday, April 29, 2016 17:44
To: N7XGlogsupport@...
Subject: re: [N7XGlogsupport] Re: Locking Up


Ralph,

What version of Windows are you using? Can you give any more details such
as what you were doing when the logger stopped working.

Open up your fccversion.txt file and tell me what you have. I can compare
it to the server.



Dean Davis, N7XG

-------- Original Message --------

From: "ralphm-kg8wl@... [N7XGlogsupport]"

<N7XGlogsupport@...>

Sent: Friday, April 29, 2016 10:47 AM
To: N7XGlogsupport@...
Subject: [N7XGlogsupport] Re: Locking Up

I have also had fairly regular problems with the window coming up saying

"cclogger.exe has stopped working". I've got the reload, update, and
restore down to under 10min., but question is about FCC database.

After a crash and reload the FCC info displayed is NOT the current

update, but if I try to upload the FCC Update it tells me I already have
the latest version????? Any suggestions??

Ralph KG8WL