¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. N3FJPSoftwareUsers
  2. Topics

WSJT-X not logging into ACL

Robert Mueller
 

For some reason, WSJT-X stopped automatically logging into ACL. I just started working some FT8, and it did log my first three Qs, but then stopped. I have tried both rig interfaces. With ACL set to none and rig control by WSJT-X, and successfully make contacts, but it does not log into ACL. Now, I have to manually log the contacts. I have setup WSJT-X per the N3FJP help page. The UDP server setting information there does not work with the IP address shown. I changed it to the IP address suggested by WSJT-X. Any suggestions?

--
73.
BOB -- K6RWM
 

Hi Bob,

Thanks for your e-mail.? Your rig interface choice is not relevant for WSJT-X to transfer the QSO data.? Your port in WSJT-X and AC Log must have the same port settings.? Please make sure both AC Log and WSJT-X are set to the same port as detailed here:



When set correctly, in AC Log, after you click Listen for WSJT-X, the timer displaying the elapsed seconds will flash green and reset every few seconds.? If that is not happening, you will need to correct your settings.

Enjoy!

73, Scott
N3FJP

Be well and enjoy!

73, Kimberly, KA3SEQ

¿ªÔÆÌåÓý the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...


On Tuesday, July 4, 2023 at 08:50:41 AM EDT, Robert Mueller <k6rwm.bob@...> wrote:


For some reason, WSJT-X stopped automatically logging into ACL. I just started working some FT8, and it did log my first three Qs, but then stopped. I have tried both rig interfaces. With ACL set to none and rig control by WSJT-X, and successfully make contacts, but it does not log into ACL. Now, I have to manually log the contacts. I have setup WSJT-X per the N3FJP help page. The UDP server setting information there does not work with the IP address shown. I changed it to the IP address suggested by WSJT-X. Any suggestions?

--
73.
BOB -- K6RWM

Robert Mueller
 

Thanks all. I missed the one port setting in the WSJT-X API interface.
All working well now.
Happy 4th!
--
73.
BOB -- K6RWM

1 - 3 of 3