¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. N3FJPSoftwareUsers
  2. Topics

Still no luck re: Rig interface stopped working on my Yaesu FT-710 #aclog

 

Thanks for the suggestions.?
?
I've tried them all - confirmed settings and connections, checked COM ports, and still can't get #ACLog to talk to my FT-710.
?
Any other insights/suggestions?
 

Hi Ken,

Thanks for your follow up.? I'm sorry that you are still having trouble.? Since you've not made any changes to the software settings and you are suddenly experiencing the same problem with multiple programs that previously worked properly, we can be sure that something external to the software is at play.?

I won't relist all the suggestions I and others have already provided again now as they are accessible in your prior thread.? I encourage you to check them all again, especially driver reinstallation, com port reassignment, seating of cables, etc.??

If none of those help, the only other thing I can think of is resetting your rig to factory default, but I have no familiarity on Yaesu equipment, so I don't have any specific insights to offer there.

You also mentioned having new problems with other unrelated applications, so there may be a problem with your PC / OS.? It would be worth trying another computer to eliminate that as a possibility.

I'm sorry all the suggestions we provided didn't resolve whatever may be going on there.? Good luck with your troubleshooting.

Enjoy!

73, Scott
N3FJP


¿ªÔÆÌåÓý the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...


On Tuesday, November 26, 2024 at 07:31:10 AM EST, Ken KN2D via groups.io <ken.kn2d@...> wrote:


Thanks for the suggestions.?
?
I've tried them all - confirmed settings and connections, checked COM ports, and still can't get #ACLog to talk to my FT-710.
?
Any other insights/suggestions?
 

Ken,
?
Have you gone back to try the CQ WW contest logger to make sure it still works correctly?
?
If it doesn't work now, you've likely had a COM Port change on your PC.
?
If it does still work, make sure all the parameters are the same between CQ WW logger and ACLog.
?
Good Luck!
 

Thanks for the suggestion, Mitch. It turned out to be an issue with the rig itself. I did a factory reset, and everything now works perfectly.
?
73,
Ken

1 - 4 of 4