I am working on a special Event station.

I don't care what "Logger" I use, be it a "Contest" logger or an every day type of logger.

I know I can do this, AFTER the event is over take the log and up load it to several sites where it will make on a map all the locations where we made contacts with.? I have done that several times.

BUT what I want to do is have this happen live to a map that anyone on the internet can watch as we are making the contacts.

we contact someone in Bel Air, MD. and an indicator appears there instantly, or a as short as possible delay.

Any logger here can do this?

Joe WB9SBD

But can this be seen by anyone anywhere in the world by going to some address?
Think like APRS.fi
takes in data and plots it on a map.
we want our contacts as we make them to appear on a map that anyone can see from anywhere.
Joe WB9SBD

On 2/21/2025 1:13 PM, KD2X Steve via wrote:

Joe,

Select view, world map and toggle "logged QSO".? You can filter by band and have the pins autohide if you wish.? Please note, this works from the actual logging station connected to a rig.? If you are using a server environment, you will need to turn this on on the individual logging stations.

Steve

KD2X

On Fri, Feb 21, 2025 at 10:47?AM Joe WB9SBD via <nss=[email protected]> wrote:

I am working on a special Event station.

I don't care what "Logger" I use, be it a "Contest" logger or an every day type of logger.

I know I can do this, AFTER the event is over take the log and up load it to several sites where it will make on a map all the locations where we made contacts with.? I have done that several times.

BUT what I want to do is have this happen live to a map that anyone on the internet can watch as we are making the contacts.

we contact someone in Bel Air, MD. and an indicator appears there instantly, or a as short as possible delay.

Any logger here can do this?

Joe WB9SBD