开云体育

Error message at startup

Joerg Volland All Messages By This Member #64164 When I start the program, I first get the message at the top for a while (no response). Only after a certain time does the program start normally and then reload the logbook. Before that, no function works in the program. ? 73! Joerg (DC9JVN)
Scott Davis All Messages By This Member #64165 Hi?Joerg, Thanks for your e-mail.? Click Settings > DX Spotting and disable the function to see if it corrects the problem.? If it does, select a different telnet host or correct your settings for the one you are trying to use. Enjoy! 73, Scott N3FJP Serving the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect... On Saturday, March 29, 2025 at 09:11:13 AM EDT, <dc9jvn@...> wrote: When I start the program, I first get the message at the top for a while (no response). Only after a certain time does the program start normally and then reload the logbook. Before that, no function works in the program. ? 73! Joerg (DC9JVN)
Joerg Volland All Messages By This Member #64166 开云体育 Hello Scott, thanks for the quick answer to my question. I have switched on the DX Cluster completely and restarted the program. Unfortunately, nothing has changed. The program starts, but brings this message again and after some time, it loads the logbook content again and then works normally. I am using Windows 11 and have already reinstalled the program. Also started with or without Admin. Nothing has changed. Loading -> no response (approx. 30 seconds) -> then runs normally. Thanks for the quick answer though! Greetings Joerg (DC9JVN) Am 29.03.2025 um 14:20 schrieb Scott Davis via groups.io: toggle quoted message Show quoted text Hi?Joerg, Thanks for your e-mail.? Click Settings > DX Spotting and disable the function to see if it corrects the problem.? If it does, select a different telnet host or correct your settings for the one you are trying to use. Enjoy! 73, Scott N3FJP Serving the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
Larry Banks All Messages By This Member #64167 开云体育 Are you trying to download from QRZ as well?? If so, check that your account is active and up-to-date. Larry / W1DYJ On 3/29/2025 13:11, Joerg Volland wrote: toggle quoted message Show quoted text Hello Scott, thanks for the quick answer to my question. I have switched on the DX Cluster completely and restarted the program. Unfortunately, nothing has changed. The program starts, but brings this message again and after some time, it loads the logbook content again and then works normally. I am using Windows 11 and have already reinstalled the program. Also started with or without Admin. Nothing has changed. Loading -> no response (approx. 30 seconds) -> then runs normally. Thanks for the quick answer though! Greetings Joerg (DC9JVN) Am 29.03.2025 um 14:20 schrieb Scott Davis via groups.io: Hi?Joerg, Thanks for your e-mail.? Click Settings > DX Spotting and disable the function to see if it corrects the problem.? If it does, select a different telnet host or correct your settings for the one you are trying to use. Enjoy! 73, Scott N3FJP Serving the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
Scott Davis All Messages By This Member #64168 Hi Joerg, Thanks for your follow up.? I'm sorry you are still having trouble.? In addition to Larry's suggestion, also try setting rig interface to None.? If that doesn't correct the problem, try disabling the API.? One of your settings is timing out and it is just a matter of figuring out which one and then correcting the setting. 73, Scott N3FJP Serving the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect... On Saturday, March 29, 2025 at 01:27:12 PM EDT, Larry Banks via groups.io <larryb.w1dyj@...> wrote: Are you trying to download from QRZ as well?? If so, check that your account is active and up-to-date. Larry / W1DYJ On 3/29/2025 13:11, Joerg Volland wrote: Hello Scott, thanks for the quick answer to my question. I have switched on the DX Cluster completely and restarted the program. Unfortunately, nothing has changed. The program starts, but brings this message again and after some time, it loads the logbook content again and then works normally. I am using Windows 11 and have already reinstalled the program. Also started with or without Admin. Nothing has changed. Loading -> no response (approx. 30 seconds) -> then runs normally. Thanks for the quick answer though! Greetings Joerg (DC9JVN) Am 29.03.2025 um 14:20 schrieb Scott Davis via groups.io: toggle quoted message Show quoted text Hi?Joerg, Thanks for your e-mail.? Click Settings > DX Spotting and disable the function to see if it corrects the problem.? If it does, select a different telnet host or correct your settings for the one you are trying to use. Enjoy! 73, Scott N3FJP Serving the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
Joerg Volland All Messages By This Member #64170 Hello Larry, thanks for the quick reply! I am a paying member of QRZ.COM and the upload and download works without any problems. I deactivated the menu in the program and then restarted the logbook. As I said, the title screen appears, then the logbook program. Then it is silent for a short time and then the error message appears. After about 30 seconds, the data is read in again and the logbook runs normally. I am running Windows 11 with the 64-bit version, but I have already tried the logbook in various compatible modes, but unfortunately without success. Thanks for your tip though! Greetings Joerg (DC9JVN) Am 29.03.2025 um 18:27 schrieb Larry Banks via groups.io: toggle quoted message Show quoted text Are you trying to download from QRZ as well?? If so, check that your account is active and up-to-date. Larry / W1DYJ
Dave Garber All Messages By This Member #64172 are you storing your log on onedrive, or another cloud service...? ? Dave Garber VE3WEJ / VE3IE toggle quoted message Show quoted text On Sat, Mar 29, 2025 at 1:11?PM Joerg Volland via <dc9jvn=[email protected]> wrote: Hello Scott, thanks for the quick answer to my question. I have switched on the DX Cluster completely and restarted the program. Unfortunately, nothing has changed. The program starts, but brings this message again and after some time, it loads the logbook content again and then works normally. I am using Windows 11 and have already reinstalled the program. Also started with or without Admin. Nothing has changed. Loading -> no response (approx. 30 seconds) -> then runs normally. Thanks for the quick answer though! Greetings Joerg (DC9JVN) Am 29.03.2025 um 14:20 schrieb Scott Davis via : Hi?Joerg, Thanks for your e-mail.? Click Settings > DX Spotting and disable the function to see if it corrects the problem.? If it does, select a different telnet host or correct your settings for the one you are trying to use. Enjoy! 73, Scott N3FJP Serving the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
Joerg Volland All Messages By This Member #64173 Hello Dave, no, the program and the logbook data are on my D: drive. Am 29.03.2025 um 21:30 schrieb Dave Garber via groups.io: toggle quoted message Show quoted text are you storing your log on onedrive, or another cloud service...? ?
Will KN6TZK All Messages By This Member #64176 What is the exact wording of the error message? ? ? -- Will KN6TZK
Joerg Volland All Messages By This Member #64177 开云体育 Hello Will, when starting the program you cannot call up any function and after a short time the error (No feedback) appears in German at the top of the menu bar. (See picture) The logbook is then frozen for about 30 seconds. Only then does it look as if it is loading the logbook data again and then works normally. Greetings Joerg (DC9JVN) Am 30.03.2025 um 18:53 schrieb Will KN6TZK via groups.io: toggle quoted message Show quoted text What is the exact wording of the error message?

Previous Topic Next Topic