开云体育

Message Approval Needed - [email protected] posted to [email protected]

Tom N0GSG All Messages By This Member #82 Hello Echo, I am very concerned about software bugs that are present in three different AnyTone CPS releases. These bugs continue to reappear for various CPS releases after your team has "corrected" them. This is not acceptable. I have received many angry messages from AnyTone owners (one is below), and have confirmed their complaints. The affected CPS releases are D878UVII Version 2.04, D878UV Version 1.26, and D578UV Version 1.15. Detailed information on each problem is below. D878UVII Version 2.04 * Loads CM-created DCF with no problems. * Creates bad DCF. (Will display FILE ERROR when importing a DCF file created by CPS, even when this file has not been edited in any way.) * "New File" icon on toolbar does nothing (but CTRL-N works) * When exporting DCF with less than 60,000 contacts in the codeplug, displays an odd error message: D878UVII ACCEPTS MAXIMUM 500K DIGITAL CONTACTS. THE PARTS EXCEEDING 200K CAN NOT BE IMPORTED. This message is very confusing on many levels - (1) No import operation was in progress - a DCF was being exported, (2) The codeplug had less than 60K contacts, and (3) Why tell us that the 'PARTS EXCEEDING 200K CAN NOT BE IMPORTED' when the limit is 500K digital contacts?!? D878UV Version 1.26 * Loads CM-created DCF with no problems. * Creates bad DCF. (Will display FILE ERROR when importing a DCF file created by CPS, even when this file has not been edited in any way.) * When clicking the ZONE setting, CPS erroneously displays A and B channel data. The zones themselves are intact. Long-standing bug in AnyTone CPS. D578UV Version 1.15 * Loads CM-created DCF with no problems. * Creates bad DCF. (Will display FILE ERROR when importing a DCF file created by CPS, even when this file has not been edited in any way.) * When exporting DCF with less than 60,000 contacts in the codeplug, displays an odd error message: D878UVII ACCEPTS MAXIMUM 500K DIGITAL CONTACTS. THE PARTS EXCEEDING 200K CAN NOT BE IMPORTED same as for D878UV Version 2.04. In closing, please be aware that I have worked very cooperatively with AnyTone to resolve these same issues numerous times since 2018. Forensic investigations of third-party software (such as the AnyTone CPS) is time consuming and expensive. It is not reasonable for me to further pursue future occurrences of this problem when I can only expect AnyTone's software team will recreate the problems again at a future time. Therefore, I will probably no longer directly pursue problems of this type unless there is a clear and present defect in the Contact Manager software. You are welcome to use Contact Manager to fully test DCF file exports and I recommend that your software team add that step to the CPS release process. This software can be downloaded from . Best, Tom ---------- Forwarded message --------- From: ted@... To:?[email protected] Date:?Wed, 29 Dec 2021 07:03:55 -0800 Subject:?Re: anytone 878uv problen Anytone needs to get its act together. My family owns 8 Anytones, and I cannot recommend an Anytone to anyone, nor will I buy another one until this is corrected.? The length of time that they are taking to fix this makes me consider that I may never recommend one in the future. I'm probably not alone on this.

Previous Topic Next Topic