|
After using CPS to convert to DCF file, Contact manager says there are errors in both radio files. So I cannot use the program at this point. Anyone else experience this?
Larry
W8LIG
|
Larry - are you using the latest AnyTone CPS? They were going to correct this.
Tom
toggle quoted message
Show quoted text
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
After using CPS to convert to DCF file, Contact manager says there are errors in both radio files. So I cannot use the program at this point. Anyone else experience this?
Larry
W8LIG
The information contained in this e-mail and any attachments thereto ("e-mail") is sent by the Johnson County Community College ("JCCC") and is intended to be confidential and for the use of only the individual or entity named above. The information may be
protected by federal and state privacy and disclosures acts or other legal rules. If the reader of this message is not the intended recipient, you are notified that retention, dissemination, distribution or copying of this e-mail is strictly prohibited. If
you have received this e-mail in error please immediately notify JCCC by email reply and immediately and permanently delete this e-mail message and any attachments thereto. Thank you.
|
Larry - are you using the latest AnyTone CPS? They were going to correct this.
Tom
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
After using CPS to convert to DCF file, Contact manager says there are errors in both radio files. So I cannot use the program at this point. Anyone else experience this?
Larry
W8LIG
The information contained in this e-mail and any attachments thereto ("e-mail") is sent by the Johnson County Community College ("JCCC") and is intended to be confidential and for the use of only the individual or entity named above. The information may be
protected by federal and state privacy and disclosures acts or other legal rules. If the reader of this message is not the intended recipient, you are notified that retention, dissemination, distribution or copying of this e-mail is strictly prohibited. If
you have received this e-mail in error please immediately notify JCCC by email reply and immediately and permanently delete this e-mail message and any attachments thereto. Thank you.
|
I've been checking??every
day for updated CPS.? Still at v2.04 (green button) and 1.26 (blue button) which have the problem.
toggle quoted message
Show quoted text
Larry - are you using the latest AnyTone CPS? They were going to correct this.
Tom
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
After using CPS to convert to DCF file, Contact manager says there are errors in both radio files. So I cannot use the program at this point. Anyone else experience this?
Larry
W8LIG
The information contained in this e-mail and any attachments thereto ("e-mail") is sent by the Johnson County Community College ("JCCC") and is intended to be confidential and for the use of only the individual or entity named above. The information may be
protected by federal and state privacy and disclosures acts or other legal rules. If the reader of this message is not the intended recipient, you are notified that retention, dissemination, distribution or copying of this e-mail is strictly prohibited. If
you have received this e-mail in error please immediately notify JCCC by email reply and immediately and permanently delete this e-mail message and any attachments thereto. Thank you.
|
Yes Tom, I've got the latest release of CPS for both radios and your latest release as well. I tried exporting and making my changes to the Channels and then importing them, but that does not return all the fields. For example, the Contact field was missing all my settings on import, but they were in Excel when I exported.
Larry
W8LIG
|
Hi John,
The 578UV2 Plus also has the problem. CPS 1.15 and FW 2.02 on that radio.
Larry
W8LIG
|
All, I heard back from Echo at AnyTone - they just released a new CPS for these units: Hi Tom,
?
Thank you for the information.
?
I have just made new CPS release to resolve this issue. Here it is the download link for the new CPS.
?
Best Regard,EchoAnytone - Qixiang Electronics
Give this a try and provide feedback on your results. I'm hoping all is now resolved. Best, Tom
|
Something like this?
D878 CPS V1.26 & D578 CPS V1.15 generate DCF files which give the following error:2 errors found in codeplug data table rows. Please double-check codeplug contents before continuing; details will be found on the ERRORS tab. Unrecoverable Error: Corrupted date in zone tables. Load aborted.
I would make the guess this is related to Anytone adding a "Zone Hide" field to the Zone data. A DCF from the previous CPS release loads perfectly fine. Let me know if I can provide any more information for you. Tom has mentioned he has submitted a ticket to Anytone some time ago. Maybe it is a difficult patch to the code.? -- 73 es God Bless de Ron KK1L <><
|
Tom:
Larry - are you using the latest AnyTone CPS? They were going to correct this.
Please clarify. ?It looks to me that the latest CPS for the D868UIVII+ is v2.02N released on 31 MAY 21. ?The most recent version of Contact Manager is v2.70 released on 16 JUN 21. ?
Consequently, have either you or Anytone released any subsequent updates appropriate for the Anytone D868UVII+ that I’m overlooking?
Thanks,
Barry Baines, WD4ASW/5 Keller, TX
Tom
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
After using CPS to convert to DCF file, Contact manager says there are errors in both radio files. So I cannot use the program at this point. Anyone else experience this?
Larry
W8LIG
The information contained in this e-mail and any attachments thereto ("e-mail") is sent by the Johnson County Community College ("JCCC") and is intended to be confidential and for the use of only the individual or entity named above. The information may be
protected by federal and state privacy and disclosures acts or other legal rules. If the reader of this message is not the intended recipient, you are notified that retention, dissemination, distribution or copying of this e-mail is strictly prohibited. If
you have received this e-mail in error please immediately notify JCCC by email reply and immediately and permanently delete this e-mail message and any attachments thereto. Thank you.
|
I do not see an upgrade?
On 3/5/2022 10:13 AM, Tom N0GSG wrote:
toggle quoted message
Show quoted text
All,
I heard back from Echo at AnyTone - they just released a new CPS
for these units:
Hi Tom,
?
Thank you for the information.
?
I have just made new CPS release to resolve this issue.
Here it is the download link for the new CPS.
?
Best Regard,
Echo
Anytone - Qixiang Electronics
Give this a try and provide feedback on your results. I'm hoping
all is now resolved.
Best,
Tom
|
It looks like the version is the same but the build date is different?
?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]>
On Behalf Of Daniel Curry K6DLC
Sent: Saturday, March 05, 2022 4:32 PM
To: [email protected]
Subject: Re: [N0GSGContactManagerSupport] Can't use with AT-878UV2 Plus or D578UV2 Plus
?
I do not see an upgrade?
On 3/5/2022 10:13 AM, Tom N0GSG wrote:
All,
I heard back from Echo at AnyTone - they just released a new CPS for these units:
Hi Tom,
Thank you for the information.
I have just made new CPS release to resolve this issue. Here it is the download link for the new CPS.
Best Regard,
Echo
Anytone - Qixiang Electronics
Give this a try and provide feedback on your results. I'm hoping all is now resolved.
Best,
Tom
|
OK here is what I had.
1) Pull down the latest CPS file from the below website.
2) Install with no problems
3) Read from my 878UV1. model mode Commercial US MODE:0001
4) Export the file to Data Conversion.
5) read the conversion file Contact Manager.? Which Radio Type is
D868UVE? < this does not make sense
6)? Added more contacts and save file.
7) Try to load this file to my 876UV
8) Try to load the *.DCF file and it fails to load to Version
1.26 Which says it apply to D878UV model only. Nothing about
European.
What am I doing wrong??????
On 3/5/2022 1:39 PM, Brian Wall wrote:
toggle quoted message
Show quoted text
It looks like the version is the same but
the build date is different?
?
?
I do not see an upgrade?
On 3/5/2022 10:13 AM, Tom N0GSG wrote:
All,
I heard back from Echo at AnyTone - they just released a new
CPS for these units:
Hi
Tom,
Thank
you for the information.
I
have just made new CPS release to resolve this issue.
Here it is the download link for the new CPS.
Best
Regard,
Echo
Anytone
- Qixiang Electronics
Give this a try and provide feedback on
your results. I'm hoping all is now resolved.
Best,
Tom
|
You have to click on the "I agree to terms to see download links"
? ? ? ? ?
I do not see an upgrade?
All,
I heard back from Echo at AnyTone - they just released a new CPS
for these units:
Hi Tom,
?
Thank you for the information.
?
I have just made new CPS release to resolve this issue.
Here it is the download link for the new CPS.
?
Best Regard,
Echo
Anytone - Qixiang Electronics
Give this a try and provide feedback on your results. I'm hoping
all is now resolved.
Best,
Tom
On 3/5/2022 10:13 AM, Tom N0GSG wrote:
?
|
I confirmed the dcf file works with the contact manager app. Seems to be the same version so no firmware update needed not is just a CPS fix.?
John
N3CLA
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> on behalf of Pamela - N1ZKH <pamela.n1zkh@...>
Sent: Saturday, March 5, 2022 9:27 PM
To: Daniel Curry K6DLC
Subject: Re: [N0GSGContactManagerSupport] Can't use with AT-878UV2 Plus or D578UV2 Plus
?
You have to click on the "I agree to terms to see download links"
?
?
?
?
?
I do not see an upgrade?
All,
I heard back from Echo at AnyTone - they just released a new CPS for these units:
Hi Tom,
?
Thank you for the information.
?
I have just made new CPS release to resolve this issue. Here it is the download link for the new CPS.
?
Best Regard,
Echo
Anytone - Qixiang Electronics
Give this a try and provide feedback on your results. I'm hoping all is now resolved.
Best,
Tom
On 3/5/2022 10:13 AM, Tom N0GSG wrote:
?
|
John,?
The CPS will read the dcf file after being saved by Contact Manager? ?The problem wasn’t Contact Manager being able to read the dcf it was the CPS reading the edited/saved DCF from CM
toggle quoted message
Show quoted text
On Mar 5, 2022, at 9:32 PM, John Clark N3CLA <jc5810pub@...> wrote:
?
I confirmed the dcf file works with the contact manager app. Seems to be the same version so no firmware update needed not is just a CPS fix.?
John
N3CLA
From: [email protected] <[email protected]> on behalf of Pamela - N1ZKH <pamela.n1zkh@...>
Sent: Saturday, March 5, 2022 9:27 PM
To: Daniel Curry K6DLC
Subject: Re: [N0GSGContactManagerSupport] Can't use with AT-878UV2 Plus or D578UV2 Plus
?
You have to click on the "I agree to terms to see download links"
?
?
?
?
?
I do not see an upgrade?
All,
I heard back from Echo at AnyTone - they just released a new CPS for these units:
Hi Tom,
?
Thank you for the information.
?
I have just made new CPS release to resolve this issue. Here it is the download link for the new CPS.
?
Best Regard,
Echo
Anytone - Qixiang Electronics
Give this a try and provide feedback on your results. I'm hoping all is now resolved.
Best,
Tom
On 3/5/2022 10:13 AM, Tom N0GSG wrote:
?
|
For me it was both before this newest version.? Both the CPS and the Contact Manager reported errors when reading DCF files from the last 2 or 3 versions of the CPS.? Both read DCF files just fine with today's version.
toggle quoted message
Show quoted text
John,?
The CPS will read the dcf file after being saved by Contact Manager? ?The problem wasn’t Contact Manager being able to read the dcf it was the CPS reading the edited/saved DCF from CM
On Mar 5, 2022, at 9:32 PM, John Clark N3CLA <jc5810pub@...> wrote:
?
I confirmed the dcf file works with the contact manager app. Seems to be the same version so no firmware update needed not is just a CPS fix.?
John
N3CLA
From: [email protected] <[email protected]> on behalf of Pamela - N1ZKH <pamela.n1zkh@...>
Sent: Saturday, March 5, 2022 9:27 PM
To: Daniel Curry K6DLC
Subject: Re: [N0GSGContactManagerSupport] Can't use with AT-878UV2 Plus or D578UV2 Plus
?
You have to click on the "I agree to terms to see download links"
?
?
?
?
?
I do not see an upgrade?
All,
I heard back from Echo at AnyTone - they just released a new CPS for these units:
Hi Tom,
?
Thank you for the information.
?
I have just made new CPS release to resolve this issue. Here it is the download link for the new CPS.
?
Best Regard,
Echo
Anytone - Qixiang Electronics
Give this a try and provide feedback on your results. I'm hoping all is now resolved.
Best,
Tom
On 3/5/2022 10:13 AM, Tom N0GSG wrote:
?
|
I have confirmed that the following work correctly for both DCF export, and import of Contact Manager 2.70 written files. These CPS files were downloaded from the WeTransfer URL provided by Anytone:
?
WORKING CORRECTLY: 878UVII_2.04 220305
WORKING CORRECTLY: D578UV_1.15 220305
UNTESTED: 878_1.26 220305
Everyone, remember that DCF files do NOT store all specific features of individual radio models.
Tom
toggle quoted message
Show quoted text
For me it was both before this newest version.? Both the CPS and the Contact Manager reported errors when reading DCF files from the last 2 or 3 versions of the CPS.? Both read DCF files just fine with today's version.
John,?
The CPS will read the dcf file after being saved by Contact Manager? ?The problem wasn’t Contact Manager being able to read the dcf it was the CPS reading the edited/saved DCF from CM
On Mar 5, 2022, at 9:32 PM, John Clark N3CLA <jc5810pub@...> wrote:
?
I confirmed the dcf file works with the contact manager app. Seems to be the same version so no firmware update needed not is just a CPS fix.?
John
N3CLA
From: [email protected] <[email protected]> on behalf of Pamela - N1ZKH <pamela.n1zkh@...>
Sent: Saturday, March 5, 2022 9:27 PM
To: Daniel Curry K6DLC
Subject: Re: [N0GSGContactManagerSupport] Can't use with AT-878UV2 Plus or D578UV2 Plus
?
You have to click on the "I agree to terms to see download links"
?
?
?
?
?
I do not see an upgrade?
All,
I heard back from Echo at AnyTone - they just released a new CPS for these units:
Hi Tom,
?
Thank you for the information.
?
I have just made new CPS release to resolve this issue. Here it is the download link for the new CPS.
?
Best Regard,
Echo
Anytone - Qixiang Electronics
Give this a try and provide feedback on your results. I'm hoping all is now resolved.
Best,
Tom
On 3/5/2022 10:13 AM, Tom N0GSG wrote:
?
The information contained in this e-mail and any attachments thereto ("e-mail") is sent by the Johnson County Community College ("JCCC") and is intended to be confidential and for the use of only the individual or entity named above. The information may be
protected by federal and state privacy and disclosures acts or other legal rules. If the reader of this message is not the intended recipient, you are notified that retention, dissemination, distribution or copying of this e-mail is strictly prohibited. If
you have received this e-mail in error please immediately notify JCCC by email reply and immediately and permanently delete this e-mail message and any attachments thereto. Thank you.
|
You have to click on the "I agree to terms to see download links"
|
The v 1.26 with the later date worked for the Anytone AT-D878UV Plus: D878UV_Setup_1.26 220305.zip. I downloaded it from here: 
|
Larry Bryan
KK1L Ron
Brian Wall
Steve W1LV