开云体育

Tom, Sure thing. Codeplug attached. -Mike K0NGA

Hello Mike, Can you attach a copy of the offending file? I'll take a look at what's going on. Tom

All, I'm using version 2.70 of the Contact Mananger to attempt to open a file I saved using version 1.59 of the Tera DMR CPS. When I attempt to open that file, Contact Manager gives me the error:

All, If you have an Alinco DJ-MD5FXT, you should be able to use Contact Manager to work with your codeplugs, but alas, there is a CPS bug. This model (and its CPS) come from Anytone. The CPS "About"

Thanks Nick

Try using N0GSG’s contact manager works with most CPS and certainly the 800’s. It’s free and makes programming SO much easier For the repeaters you can’t hear make sure you do not have a PL

Hi Tom, I started with the simple stuff. I programmed some local VHF and UHF repeaters. A couple worked fine, and a couple did not; I could see the signal reception icon, but no audio. I rebooted,

I’d suggest reaching out to Jerry at Connect System's. Call they always answer in person and are very helpful. I like the idea of the new 800D Plus. I had the 800D years ago but now went the way on

Hi, Thanks for your help. I ordered a CS800 and they shipped a CS800D Plus. I have spent a good 8 hours trying to program and probably that much time researching, and have a number of problems. I

I’ve successfully used CM with my CS800D PLUS before, but never tried to import the entire user contact list. Just tried, and worked perfectly… Tom W4KX Sent: Saturday, January 21, 2023

Hello Doug, Contact Manager SHOULD support this radio. There have been many firmware revisions and codeplug format changes. Please give it a try and report back to us. (I have a CS800D that's several

Hello All Will Contact Manager work with the 800D Plus? ?I received the radio yesterday and am starting to program it and saw Contact Manager and would like to use it. Thanks Doug N8FRJ

The v 1.26 with the later date worked for the Anytone AT-D878UV Plus: D878UV_Setup_1.26 220305.zip. I downloaded it from here: http://anytone.net/download.html

I thought I had loaded the latest CPS from the link in the original email. I guess I’ll go back and check. Thanks Nick Meacher C.M. MEP AA0NM 717-965-5187 https://fortunefavorstheprepared.com/

All - looks like Anytone posted the updated CPS installers to their website. http://www.anytone.net/download.html The new versions are currently at the top without the "official release"

Greg, thanks for checking out N3WWE's situation - glad that all is working. FYI my approach with AnyTone hardware has been simple - - if it's working properly, don't mess with

N3WWE - I have opened your BASE.RDT file using D578UV.exe dated 10 Jan 2022 (in details tab of properties on the EXE file). Then wrote a DCF file. I then opened that DCF file without error on Contact

I've used an AT 868 for some time and done a lot of programming with it and contract manager so not a newbie with this. I've been trying to open a new codeplug from a new AT D578UV III Plus I read

I've test 878 v1.26 works correctly with DCF... I reordered zones and channels in ContactManager and the changes imported correctly. Thanks, Tom,? for keeping on Anytone to resolve this

Tom, I agree with the 1.5 version working, I tried this version this morning and then we left for some appointments. Will try 2.4 later today. I'm working to get my code plug in my new 578, but at