开云体育

Circuit for PiP EM272

[email protected] All Messages By This Member #37239 Hello fellow mic builders, I've soldered some cables to the EM272 capsules, with + to signal and GND to GND. My Sony PCM M10 provides 3V of PiP.? ? Should I also solder in the circuit from the data sheet, with a resistor from GND to Signal and a capacitor to the Mic in? If so what are the benefits? Is it true that I could damage the recorder through not filtering the DC voltage? ? Thank you very much!?
Jules Ryckebusch All Messages By This Member #37242 PIP power already has the resistor and capacitor internally. You don't?need to add them, just?plug it in to the Sony and you should?be good.? Jules toggle quoted message Show quoted text On Tue, Feb 18, 2025 at 5:29?AM dampfus.hansus via <dampfus.hansus=[email protected]> wrote: Hello fellow mic builders, I've soldered some cables to the EM272 capsules, with + to signal and GND to GND. My Sony PCM M10 provides 3V of PiP.? ? Should I also solder in the circuit from the data sheet, with a resistor from GND to Signal and a capacitor to the Mic in? If so what are the benefits? Is it true that I could damage the recorder through not filtering the DC voltage? ? Thank you very much!? -- Best Regards, Jules Ryckebusch 214 399 0931
Jerry Lee Marcel All Messages By This Member #37243 开云体育 The Sony PCM10, as well as all other products that provide PIP, include the protection capacitor and resistor. Addding them would not have any benefit. Le 18/02/2025 à 10:34, dampfus.hansus via groups.io a écrit?: toggle quoted message Show quoted text Hello fellow mic builders, I've soldered some cables to the EM272 capsules, with + to signal and GND to GND. My Sony PCM M10 provides 3V of PiP.? ? Should I also solder in the circuit from the data sheet, with a resistor from GND to Signal and a capacitor to the Mic in? If so what are the benefits? Is it true that I could damage the recorder through not filtering the DC voltage? ? Thank you very much!?
jean-luc brion All Messages By This Member #37245 Hi Everything is fine with + capsule on + jack and ground capsule on ground jack. The assembly of the technical sheet is already inside the recorder
[email protected] All Messages By This Member #37249 thank you everyone for clearing things up.

Previous Topic Next Topic