Does anyone know if a wxlua frame with buttons module, can run correctly being called from a g code file within an m code file?
or is it only able to run from button scripts...

Thanks gary

----------------------------------------------------------
-- frame with 4 buttons inside a Coroutine module script
-- Runs from a button script
----------------------------------------------------------
inst = mc.mcGetInstance()
local path = mc.mcCntlGetMachDir(inst)
package.path = path .."\\Modules\\?.lua;"

??? --mach4ProbeMenu module
package.loaded.mach4ProbeMenu = nil
pb = require "mach4ProbeMenu"
?? ?
pb.M6Menu()



----------------------------------------------------------
-- frame with 4 buttons inside a Coroutine modual script
-- this goes into the modules folder
----------------------------------------------------------
------------------------------------------------------------------------------------
-- Module to be called with button script
-- So far i have not been able to get to run correct being called from a g code file
------------------------------------------------------------------------------------
local M6Control = {}

function M6Control.M6Menu()

local function button1Event(event)
??? coroutine.wrap(function()
??????? -- code for button 1 event
??? end)()
end

local function button2Event(event)
??? coroutine.wrap(function()
??????? -- code for button 2 event
??? end)()
end

local function button3Event(event)
??? coroutine.wrap(function()
??????? -- code for button 3 event
??? end)()
end

local function button4Event(event, frame)
??? coroutine.wrap(function()
??? Abort()
??? frame:Destroy()
??????? -- code for button 4 event
??? end)()
end

local function main()
??? -- Create a new frame
??? local frame = wx.wxFrame(wx.NULL, wx.wxID_ANY, "My Frame",
??????????????????????????? wx.wxDefaultPosition, wx.wxSize(340, 400))

??? -- Create Text above each button
??? local text1 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Button:\nTool must be in the Tool Table and offset set Swap tool out then Press Manual",
??????????????????????????????? wx.wxPoint(20, 10), wx.wxSize(150, 100))
??? local text2 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Touch:\nSwap tool out then Jog Z down to part surface use a feeler gauge, then Press Manual Touch",
??????????????????????????????? wx.wxPoint(20, 70), wx.wxSize(150, 100))
??? local text3 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Probe:\nSwap tool out then put your touch off plate on top of part, Z will move down to above part surface and probe part, After Pressing Manual Touch",
??????????????????????????????? wx.wxPoint(20, 150), wx.wxSize(150, 100))
??? local text4 = wx.wxStaticText(frame, wx.wxID_ANY, "Abort:\nPress abort only if you cannot do a tool swap it will exit and also will disable the machine stop all code from running",
??????????????????????????????? wx.wxPoint(20, 250), wx.wxSize(150, 100))

??? -- Create buttons
??? local button1 = wx.wxButton(frame, wx.wxID_ANY, "Manual",
??????????????????????????????? wx.wxPoint(200, 20), wx.wxSize(100, 30))
??? local button2 = wx.wxButton(frame, wx.wxID_ANY, "Manual Touch",
??????????????????????????????? wx.wxPoint(200, 90), wx.wxSize(100, 30))
??? local button3 = wx.wxButton(frame, wx.wxID_ANY, "Manual Probe",
??????????????????????????????? wx.wxPoint(200, 180), wx.wxSize(100, 30))
??? local button4 = wx.wxButton(frame, wx.wxID_ANY, "Abort",
??????????????????????????????? wx.wxPoint(200, 270), wx.wxSize(100, 30))

??? -- Connect button events
??? button1:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button1Event)
??? button2:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button2Event)
??? button3:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button3Event)
??? button4:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, function(event) button4Event(event, frame) end)

-- Show the frame
frame:Show(true)
end

local co = coroutine.wrap(main)
co() -- start the coroutine

function Abort()
--frame:Destroy()
wx.wxMessageBox("Abort")
end
wx.wxGetApp():MainLoop()
end

--M6Control.M6Menu()

return M6Control

here is an example of the code i have been trying, i wanted to call the frame when doing a tool change, based on checking some registers that may be set..
and only call the frame if need be...

Thanks gary

?

Hi Gary,

What you will need to do is put this code in the screen (where graphics are done). In your M6 set a register to a value that will trigger the dialog in the screen. You will need a spinlock checking to see when your dialog is done (set some other register stating that the Macro needs to continue) . We do have some other tools to hold a macro (mcFileHoldAquire) but it's a bit more advanced (This is the tool that allows the manual tool change to work) and what is also doing the the work for the mcCntlWaitOnCycleStart command. Try that out and tell me how it works for you. If you would like a hand doing it I am more than happy to assist you with the programming. I think this would be a cool router feature :)

?

thanks
Brian

?

______________________________

?

Brian Barker

Engineering / Development

ArtSoft | Newfangled Solutions

Livermore Falls, Maine (USA)

Webpage: 

----------------------------------------------------------
-- frame with 4 buttons inside a Coroutine module script
-- Runs from a button script
----------------------------------------------------------
inst = mc.mcGetInstance()
local path = mc.mcCntlGetMachDir(inst)
package.path = path .."\\Modules\\?.lua;"

??? --mach4ProbeMenu module
package.loaded.mach4ProbeMenu = nil
pb = require "mach4ProbeMenu"
?? ?
pb.M6Menu()



----------------------------------------------------------
-- frame with 4 buttons inside a Coroutine modual script
-- this goes into the modules folder
----------------------------------------------------------
------------------------------------------------------------------------------------
-- Module to be called with button script
-- So far i have not been able to get to run correct being called from a g code file
------------------------------------------------------------------------------------
local M6Control = {}

function M6Control.M6Menu()

local function button1Event(event)
??? coroutine.wrap(function()
??????? -- code for button 1 event
??? end)()
end

local function button2Event(event)
??? coroutine.wrap(function()
??????? -- code for button 2 event
??? end)()
end

local function button3Event(event)
??? coroutine.wrap(function()
??????? -- code for button 3 event
??? end)()
end

local function button4Event(event, frame)
??? coroutine.wrap(function()
??? Abort()
??? frame:Destroy()
??????? -- code for button 4 event
??? end)()
end

local function main()
??? -- Create a new frame
??? local frame = wx.wxFrame(wx.NULL, wx.wxID_ANY, "My Frame",
??????????????????????????? wx.wxDefaultPosition, wx.wxSize(340, 400))

??? -- Create Text above each button
??? local text1 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Button:\nTool must be in the Tool Table and offset set Swap tool out then Press Manual",
??????????????????????????????? wx.wxPoint(20, 10), wx.wxSize(150, 100))
??? local text2 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Touch:\nSwap tool out then Jog Z down to part surface use a feeler gauge, then Press Manual Touch",
??????????????????????????????? wx.wxPoint(20, 70), wx.wxSize(150, 100))
??? local text3 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Probe:\nSwap tool out then put your touch off plate on top of part, Z will move down to above part surface and probe part, After Pressing Manual Touch",
??????????????????????????????? wx.wxPoint(20, 150), wx.wxSize(150, 100))
??? local text4 = wx.wxStaticText(frame, wx.wxID_ANY, "Abort:\nPress abort only if you cannot do a tool swap it will exit and also will disable the machine stop all code from running",
??????????????????????????????? wx.wxPoint(20, 250), wx.wxSize(150, 100))

??? -- Create buttons
??? local button1 = wx.wxButton(frame, wx.wxID_ANY, "Manual",
??????????????????????????????? wx.wxPoint(200, 20), wx.wxSize(100, 30))
??? local button2 = wx.wxButton(frame, wx.wxID_ANY, "Manual Touch",
??????????????????????????????? wx.wxPoint(200, 90), wx.wxSize(100, 30))
??? local button3 = wx.wxButton(frame, wx.wxID_ANY, "Manual Probe",
??????????????????????????????? wx.wxPoint(200, 180), wx.wxSize(100, 30))
??? local button4 = wx.wxButton(frame, wx.wxID_ANY, "Abort",
??????????????????????????????? wx.wxPoint(200, 270), wx.wxSize(100, 30))

??? -- Connect button events
??? button1:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button1Event)
??? button2:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button2Event)
??? button3:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button3Event)
??? button4:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, function(event) button4Event(event, frame) end)

-- Show the frame
frame:Show(true)
end

local co = coroutine.wrap(main)
co() -- start the coroutine

function Abort()
--frame:Destroy()
wx.wxMessageBox("Abort")
end
wx.wxGetApp():MainLoop()
end

--M6Control.M6Menu()

return M6Control

here is an example of the code i have been trying, i wanted to call the frame when doing a tool change, based on checking some registers that may be set..
and only call the frame if need be...

Thanks gary

?

Hi Gary,

What you will need to do is put this code in the screen (where graphics are done). In your M6 set a register to a value that will trigger the dialog in the screen. You will need a spinlock checking to see when your dialog is done (set some other register stating that the Macro needs to continue) . We do have some other tools to hold a macro (mcFileHoldAquire) but it's a bit more advanced (This is the tool that allows the manual tool change to work) and what is also doing the the work for the mcCntlWaitOnCycleStart command. Try that out and tell me how it works for you. If you would like a hand doing it I am more than happy to assist you with the programming. I think this would be a cool router feature :)

?

thanks
Brian

?

______________________________

?

Brian Barker

Engineering / Development

ArtSoft | Newfangled Solutions

Livermore Falls, Maine (USA)

Webpage: 

----------------------------------------------------------
-- frame with 4 buttons inside a Coroutine module script
-- Runs from a button script
----------------------------------------------------------
inst = mc.mcGetInstance()
local path = mc.mcCntlGetMachDir(inst)
package.path = path .."\\Modules\\?.lua;"

??? --mach4ProbeMenu module
package.loaded.mach4ProbeMenu = nil
pb = require "mach4ProbeMenu"
?? ?
pb.M6Menu()



----------------------------------------------------------
-- frame with 4 buttons inside a Coroutine modual script
-- this goes into the modules folder
----------------------------------------------------------
------------------------------------------------------------------------------------
-- Module to be called with button script
-- So far i have not been able to get to run correct being called from a g code file
------------------------------------------------------------------------------------
local M6Control = {}

function M6Control.M6Menu()

local function button1Event(event)
??? coroutine.wrap(function()
??????? -- code for button 1 event
??? end)()
end

local function button2Event(event)
??? coroutine.wrap(function()
??????? -- code for button 2 event
??? end)()
end

local function button3Event(event)
??? coroutine.wrap(function()
??????? -- code for button 3 event
??? end)()
end

local function button4Event(event, frame)
??? coroutine.wrap(function()
??? Abort()
??? frame:Destroy()
??????? -- code for button 4 event
??? end)()
end

local function main()
??? -- Create a new frame
??? local frame = wx.wxFrame(wx.NULL, wx.wxID_ANY, "My Frame",
??????????????????????????? wx.wxDefaultPosition, wx.wxSize(340, 400))

??? -- Create Text above each button
??? local text1 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Button:\nTool must be in the Tool Table and offset set Swap tool out then Press Manual",
??????????????????????????????? wx.wxPoint(20, 10), wx.wxSize(150, 100))
??? local text2 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Touch:\nSwap tool out then Jog Z down to part surface use a feeler gauge, then Press Manual Touch",
??????????????????????????????? wx.wxPoint(20, 70), wx.wxSize(150, 100))
??? local text3 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Probe:\nSwap tool out then put your touch off plate on top of part, Z will move down to above part surface and probe part, After Pressing Manual Touch",
??????????????????????????????? wx.wxPoint(20, 150), wx.wxSize(150, 100))
??? local text4 = wx.wxStaticText(frame, wx.wxID_ANY, "Abort:\nPress abort only if you cannot do a tool swap it will exit and also will disable the machine stop all code from running",
??????????????????????????????? wx.wxPoint(20, 250), wx.wxSize(150, 100))

??? -- Create buttons
??? local button1 = wx.wxButton(frame, wx.wxID_ANY, "Manual",
??????????????????????????????? wx.wxPoint(200, 20), wx.wxSize(100, 30))
??? local button2 = wx.wxButton(frame, wx.wxID_ANY, "Manual Touch",
??????????????????????????????? wx.wxPoint(200, 90), wx.wxSize(100, 30))
??? local button3 = wx.wxButton(frame, wx.wxID_ANY, "Manual Probe",
??????????????????????????????? wx.wxPoint(200, 180), wx.wxSize(100, 30))
??? local button4 = wx.wxButton(frame, wx.wxID_ANY, "Abort",
??????????????????????????????? wx.wxPoint(200, 270), wx.wxSize(100, 30))

??? -- Connect button events
??? button1:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button1Event)
??? button2:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button2Event)
??? button3:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button3Event)
??? button4:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, function(event) button4Event(event, frame) end)

-- Show the frame
frame:Show(true)
end

local co = coroutine.wrap(main)
co() -- start the coroutine

function Abort()
--frame:Destroy()
wx.wxMessageBox("Abort")
end
wx.wxGetApp():MainLoop()
end

--M6Control.M6Menu()

return M6Control

here is an example of the code i have been trying, i wanted to call the frame when doing a tool change, based on checking some registers that may be set..
and only call the frame if need be...

Thanks gary

Ok thanks Brian,

?

I will try them out, by in the screen not sure what screen the frame? The screen load script ?

?

What my real goal was or is, I have a rotary tool changer, I am checking the m6 macro to see if the new tool is in the rack if not the switching to a manual tool change, the dialog was just a thought if the tool not in rack then give the option to manual tool change and continue is the tool is in the tool table an offset it set, or is tool not in the table and or offset not set then jog down and touch off top of part, or the option to use a touch off plate and probe it, leaving the choices up to me hence the frame and buttons..

?

I will most likely need help I am starting to go over my head now… I did try local semaphore = require("semaphore")

but doesn’t seem to be in the library…. And not sure if it was were the directory is located…

?

Thangs Gary

?

Sent from for Windows

?

From: Brian Barker
Sent: Friday, January 27, 2023 8:36 AM
To: [email protected]
Subject: Re: [MachCNC] wxlua frame

?

Hi Gary,

What you will need to do is put this code in the screen (where graphics are done). In your M6 set a register to a value that will trigger the dialog in the screen. You will need a spinlock checking to see when your dialog is done (set some other register stating that the Macro needs to continue) . We do have some other tools to hold a macro (mcFileHoldAquire) but it's a bit more advanced (This is the tool that allows the manual tool change to work) and what is also doing the the work for the mcCntlWaitOnCycleStart command. Try that out and tell me how it works for you. If you would like a hand doing it I am more than happy to assist you with the programming. I think this would be a cool router feature :)

?

thanks
Brian

?

______________________________

?

Brian Barker

Engineering / Development

ArtSoft | Newfangled Solutions

Livermore Falls, Maine (USA)

Webpage: 

On 1/26/2023 7:00 PM, Gary wrote:

----------------------------------------------------------
-- frame with 4 buttons inside a Coroutine module script
-- Runs from a button script
----------------------------------------------------------
inst = mc.mcGetInstance()
local path = mc.mcCntlGetMachDir(inst)
package.path = path .."\\Modules\\?.lua;"

??? --mach4ProbeMenu module
package.loaded.mach4ProbeMenu = nil
pb = require "mach4ProbeMenu"
?? ?
pb.M6Menu()



----------------------------------------------------------
-- frame with 4 buttons inside a Coroutine modual script
-- this goes into the modules folder
----------------------------------------------------------
------------------------------------------------------------------------------------
-- Module to be called with button script
-- So far i have not been able to get to run correct being called from a g code file
------------------------------------------------------------------------------------
local M6Control = {}

function M6Control.M6Menu()

local function button1Event(event)
??? coroutine.wrap(function()
??????? -- code for button 1 event
??? end)()
end

local function button2Event(event)
??? coroutine.wrap(function()
??????? -- code for button 2 event
??? end)()
end

local function button3Event(event)
??? coroutine.wrap(function()
??????? -- code for button 3 event
??? end)()
end

local function button4Event(event, frame)
??? coroutine.wrap(function()
??? Abort()
??? frame:Destroy()
??????? -- code for button 4 event
??? end)()
end

local function main()
??? -- Create a new frame
??? local frame = wx.wxFrame(wx.NULL, wx.wxID_ANY, "My Frame",
??????????????????????????? wx.wxDefaultPosition, wx.wxSize(340, 400))

??? -- Create Text above each button
??? local text1 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Button:\nTool must be in the Tool Table and offset set Swap tool out then Press Manual",
??????????????????????????????? wx.wxPoint(20, 10), wx.wxSize(150, 100))
??? local text2 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Touch:\nSwap tool out then Jog Z down to part surface use a feeler gauge, then Press Manual Touch",
??????????????????????????????? wx.wxPoint(20, 70), wx.wxSize(150, 100))
??? local text3 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Probe:\nSwap tool out then put your touch off plate on top of part, Z will move down to above part surface and probe part, After Pressing Manual Touch",
??????????????????????????????? wx.wxPoint(20, 150), wx.wxSize(150, 100))
??? local text4 = wx.wxStaticText(frame, wx.wxID_ANY, "Abort:\nPress abort only if you cannot do a tool swap it will exit and also will disable the machine stop all code from running",
??????????????????????????????? wx.wxPoint(20, 250), wx.wxSize(150, 100))

??? -- Create buttons
??? local button1 = wx.wxButton(frame, wx.wxID_ANY, "Manual",
??????????????????????????????? wx.wxPoint(200, 20), wx.wxSize(100, 30))
??? local button2 = wx.wxButton(frame, wx.wxID_ANY, "Manual Touch",
??????????????????????????????? wx.wxPoint(200, 90), wx.wxSize(100, 30))
??? local button3 = wx.wxButton(frame, wx.wxID_ANY, "Manual Probe",
??????????????????????????????? wx.wxPoint(200, 180), wx.wxSize(100, 30))
??? local button4 = wx.wxButton(frame, wx.wxID_ANY, "Abort",
??????????????????????????????? wx.wxPoint(200, 270), wx.wxSize(100, 30))

??? -- Connect button events
??? button1:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button1Event)
??? button2:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button2Event)
??? button3:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button3Event)
??? button4:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, function(event) button4Event(event, frame) end)

-- Show the frame
frame:Show(true)
end

local co = coroutine.wrap(main)
co() -- start the coroutine

function Abort()
--frame:Destroy()
wx.wxMessageBox("Abort")
end
wx.wxGetApp():MainLoop()
end

--M6Control.M6Menu()

return M6Control

here is an example of the code i have been trying, i wanted to call the frame when doing a tool change, based on checking some registers that may be set..
and only call the frame if need be...

Thanks gary

?

Brian,

?

I tried out the mcFileHoldAquire() in the m6 file it did stop there and I was able to jog the axis’s.

But after jogging I hit cycle start button it seemed to get stuck on the next statement that is a ?mcCntlGcodeExecute()? Its didn’t lock up the system but hitting cycle start doesn’t seen to matter just never would exit the m6 script, if I hit cycle stop it would stop and exit the m6 script..

I also tried adding a mc.mcFileHoldRelease() but had no effect..

?

Thanks Gary

?

?

?

Sent from for Windows

?

From: Brian Barker
Sent: Friday, January 27, 2023 8:36 AM
To: [email protected]
Subject: Re: [MachCNC] wxlua frame

?

Hi Gary,

What you will need to do is put this code in the screen (where graphics are done). In your M6 set a register to a value that will trigger the dialog in the screen. You will need a spinlock checking to see when your dialog is done (set some other register stating that the Macro needs to continue) . We do have some other tools to hold a macro (mcFileHoldAquire) but it's a bit more advanced (This is the tool that allows the manual tool change to work) and what is also doing the the work for the mcCntlWaitOnCycleStart command. Try that out and tell me how it works for you. If you would like a hand doing it I am more than happy to assist you with the programming. I think this would be a cool router feature :)

?

thanks
Brian

?

______________________________

?

Brian Barker

Engineering / Development

ArtSoft | Newfangled Solutions

Livermore Falls, Maine (USA)

Webpage: 

On 1/26/2023 7:00 PM, Gary wrote:

----------------------------------------------------------
-- frame with 4 buttons inside a Coroutine module script
-- Runs from a button script
----------------------------------------------------------
inst = mc.mcGetInstance()
local path = mc.mcCntlGetMachDir(inst)
package.path = path .."\\Modules\\?.lua;"

??? --mach4ProbeMenu module
package.loaded.mach4ProbeMenu = nil
pb = require "mach4ProbeMenu"
?? ?
pb.M6Menu()



----------------------------------------------------------
-- frame with 4 buttons inside a Coroutine modual script
-- this goes into the modules folder
----------------------------------------------------------
------------------------------------------------------------------------------------
-- Module to be called with button script
-- So far i have not been able to get to run correct being called from a g code file
------------------------------------------------------------------------------------
local M6Control = {}

function M6Control.M6Menu()

local function button1Event(event)
??? coroutine.wrap(function()
??????? -- code for button 1 event
??? end)()
end

local function button2Event(event)
??? coroutine.wrap(function()
??????? -- code for button 2 event
??? end)()
end

local function button3Event(event)
??? coroutine.wrap(function()
??????? -- code for button 3 event
??? end)()
end

local function button4Event(event, frame)
??? coroutine.wrap(function()
??? Abort()
??? frame:Destroy()
??????? -- code for button 4 event
??? end)()
end

local function main()
??? -- Create a new frame
??? local frame = wx.wxFrame(wx.NULL, wx.wxID_ANY, "My Frame",
??????????????????????????? wx.wxDefaultPosition, wx.wxSize(340, 400))

??? -- Create Text above each button
??? local text1 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Button:\nTool must be in the Tool Table and offset set Swap tool out then Press Manual",
??????????????????????????????? wx.wxPoint(20, 10), wx.wxSize(150, 100))
??? local text2 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Touch:\nSwap tool out then Jog Z down to part surface use a feeler gauge, then Press Manual Touch",
??????????????????????????????? wx.wxPoint(20, 70), wx.wxSize(150, 100))
??? local text3 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Probe:\nSwap tool out then put your touch off plate on top of part, Z will move down to above part surface and probe part, After Pressing Manual Touch",
??????????????????????????????? wx.wxPoint(20, 150), wx.wxSize(150, 100))
??? local text4 = wx.wxStaticText(frame, wx.wxID_ANY, "Abort:\nPress abort only if you cannot do a tool swap it will exit and also will disable the machine stop all code from running",
??????????????????????????????? wx.wxPoint(20, 250), wx.wxSize(150, 100))

??? -- Create buttons
??? local button1 = wx.wxButton(frame, wx.wxID_ANY, "Manual",
??????????????????????????????? wx.wxPoint(200, 20), wx.wxSize(100, 30))
??? local button2 = wx.wxButton(frame, wx.wxID_ANY, "Manual Touch",
??????????????????????????????? wx.wxPoint(200, 90), wx.wxSize(100, 30))
??? local button3 = wx.wxButton(frame, wx.wxID_ANY, "Manual Probe",
??????????????????????????????? wx.wxPoint(200, 180), wx.wxSize(100, 30))
??? local button4 = wx.wxButton(frame, wx.wxID_ANY, "Abort",
??????????????????????????????? wx.wxPoint(200, 270), wx.wxSize(100, 30))

??? -- Connect button events
??? button1:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button1Event)
??? button2:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button2Event)
??? button3:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button3Event)
??? button4:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, function(event) button4Event(event, frame) end)

-- Show the frame
frame:Show(true)
end

local co = coroutine.wrap(main)
co() -- start the coroutine

function Abort()
--frame:Destroy()
wx.wxMessageBox("Abort")
end
wx.wxGetApp():MainLoop()
end

--M6Control.M6Menu()

return M6Control

here is an example of the code i have been trying, i wanted to call the frame when doing a tool change, based on checking some registers that may be set..
and only call the frame if need be...

Thanks gary

?

?

Hi Gary,

Sorry I was coaching robotics and had a comp this weekend so I was flat out :) The good news is that I had 2 more teems qualify for states! Okay back to work!?

?

We don't have any real library for semaphores, it's really telling you how you need to architect the system. Let me see if I can make something to show you how I would do it in a screen. But basically we don't allow graphics in the Macro's (Mostly because we didn't see the need and I think this is still the best). How you communicate to the macro's is through registers. The registers are the only way to have thread safe data in Lua to the rest of the system. Having graphics in the Mcodes could and would put the events into the macro's / Gcode thread and we REALLY don't want that! By communicating via registers it will allow you to have your dialog and not have the Gcode interpreter thread plugged up with graphics.

?

Now onto the solution!

?

You need to setup a register in the register conifig dialog:

Mine is at the following path "iRegs0/ToolSettings"

?

So in my M6 macro I would put the following:

local inst = mc.mcGetInstance("M6 Toolchange")
local tchangeReg = mc.mcRegGetHandle(inst,"iRegs0/ToolSettings")
local rc = mc.mcRegSetValue(tchangeReg,"ShowTchangeDlg")

-- Code to wait for the dialog to end
while(mc.mcRegGetValue(tchangeReg) == "ShowTchangeDlg") do
?? ?wx.wxMilliSleep(500)
?-- May want to add some code here in the event someone presses stop or kills the program
end
local ReturnValue = mc.mcRegGetValue(tchangeReg)

-- Continue with the toolchanger and you have the return in the register.

?

?

Now in the screen you can put your dialog in a function and check to see if you need to launch it in the PLC script :

local inst = mc.mcGetInstance("M6 Toolchange Dialog")
if(toolchangeActiveReg == nil)then -- put the handle to the toolchange Osig in the global table
?? ?toolchangeActiveReg = mc.mcSignalGetHandle(inst,mc.OSIG_TOOL_CHANGE)
end
if(tchangeDlogReg == nil)then
tchangeDlogReg = mc.mcRegGetHandle(inst,"iRegs0/ToolSettings")
end

if(mc.mcRegGetValue(tchangeReg) == "ShowTchangeDlg" and mc.mcSignalGetState(toolchangeActiveReg) == 1 && dlghandle == nil)then
?? ?
?? ?dlghandle = YourDialogFunction()-- Remember to pass back something from the dialog so we know it has been done
else
?? ?if(mc.mcRegGetValue(tchangeReg) ~= "ShowTchangeDlg" and? dlghandle ~= nil) then
?? ??? ?dlghandle = nil-- kill the dialog so the garbage collector can get it back
?? ?end
end

?

?

This is all untested and 100% can be changed but I think it clearly shows how I would do it :)

?

Hope that helps!

______________________________

?

Brian Barker

Engineering / Development

ArtSoft | Newfangled Solutions

Livermore Falls, Maine (USA)

Webpage: 

Ok thanks Brian,

?

I will try them out, by in the screen not sure what screen the frame? The screen load script ?

?

What my real goal was or is, I have a rotary tool changer, I am checking the m6 macro to see if the new tool is in the rack if not the switching to a manual tool change, the dialog was just a thought if the tool not in rack then give the option to manual tool change and continue is the tool is in the tool table an offset it set, or is tool not in the table and or offset not set then jog down and touch off top of part, or the option to use a touch off plate and probe it, leaving the choices up to me hence the frame and buttons..

?

I will most likely need help I am starting to go over my head now… I did try local semaphore = require("semaphore")

but doesn’t seem to be in the library…. And not sure if it was were the directory is located…

?

Thangs Gary

?

Sent from for Windows

?

From: Brian Barker
Sent: Friday, January 27, 2023 8:36 AM
To: [email protected]
Subject: Re: [MachCNC] wxlua frame

?

Hi Gary,

What you will need to do is put this code in the screen (where graphics are done). In your M6 set a register to a value that will trigger the dialog in the screen. You will need a spinlock checking to see when your dialog is done (set some other register stating that the Macro needs to continue) . We do have some other tools to hold a macro (mcFileHoldAquire) but it's a bit more advanced (This is the tool that allows the manual tool change to work) and what is also doing the the work for the mcCntlWaitOnCycleStart command. Try that out and tell me how it works for you. If you would like a hand doing it I am more than happy to assist you with the programming. I think this would be a cool router feature :)

?

thanks
Brian

?

______________________________

?

Brian Barker

Engineering / Development

ArtSoft | Newfangled Solutions

Livermore Falls, Maine (USA)

Webpage: 

On 1/26/2023 7:00 PM, Gary wrote:

----------------------------------------------------------
-- frame with 4 buttons inside a Coroutine module script
-- Runs from a button script
----------------------------------------------------------
inst = mc.mcGetInstance()
local path = mc.mcCntlGetMachDir(inst)
package.path = path .."\\Modules\\?.lua;"

??? --mach4ProbeMenu module
package.loaded.mach4ProbeMenu = nil
pb = require "mach4ProbeMenu"
?? ?
pb.M6Menu()



----------------------------------------------------------
-- frame with 4 buttons inside a Coroutine modual script
-- this goes into the modules folder
----------------------------------------------------------
------------------------------------------------------------------------------------
-- Module to be called with button script
-- So far i have not been able to get to run correct being called from a g code file
------------------------------------------------------------------------------------
local M6Control = {}

function M6Control.M6Menu()

local function button1Event(event)
??? coroutine.wrap(function()
??????? -- code for button 1 event
??? end)()
end

local function button2Event(event)
??? coroutine.wrap(function()
??????? -- code for button 2 event
??? end)()
end

local function button3Event(event)
??? coroutine.wrap(function()
??????? -- code for button 3 event
??? end)()
end

local function button4Event(event, frame)
??? coroutine.wrap(function()
??? Abort()
??? frame:Destroy()
??????? -- code for button 4 event
??? end)()
end

local function main()
??? -- Create a new frame
??? local frame = wx.wxFrame(wx.NULL, wx.wxID_ANY, "My Frame",
??????????????????????????? wx.wxDefaultPosition, wx.wxSize(340, 400))

??? -- Create Text above each button
??? local text1 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Button:\nTool must be in the Tool Table and offset set Swap tool out then Press Manual",
??????????????????????????????? wx.wxPoint(20, 10), wx.wxSize(150, 100))
??? local text2 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Touch:\nSwap tool out then Jog Z down to part surface use a feeler gauge, then Press Manual Touch",
??????????????????????????????? wx.wxPoint(20, 70), wx.wxSize(150, 100))
??? local text3 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Probe:\nSwap tool out then put your touch off plate on top of part, Z will move down to above part surface and probe part, After Pressing Manual Touch",
??????????????????????????????? wx.wxPoint(20, 150), wx.wxSize(150, 100))
??? local text4 = wx.wxStaticText(frame, wx.wxID_ANY, "Abort:\nPress abort only if you cannot do a tool swap it will exit and also will disable the machine stop all code from running",
??????????????????????????????? wx.wxPoint(20, 250), wx.wxSize(150, 100))

??? -- Create buttons
??? local button1 = wx.wxButton(frame, wx.wxID_ANY, "Manual",
??????????????????????????????? wx.wxPoint(200, 20), wx.wxSize(100, 30))
??? local button2 = wx.wxButton(frame, wx.wxID_ANY, "Manual Touch",
??????????????????????????????? wx.wxPoint(200, 90), wx.wxSize(100, 30))
??? local button3 = wx.wxButton(frame, wx.wxID_ANY, "Manual Probe",
??????????????????????????????? wx.wxPoint(200, 180), wx.wxSize(100, 30))
??? local button4 = wx.wxButton(frame, wx.wxID_ANY, "Abort",
??????????????????????????????? wx.wxPoint(200, 270), wx.wxSize(100, 30))

??? -- Connect button events
??? button1:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button1Event)
??? button2:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button2Event)
??? button3:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button3Event)
??? button4:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, function(event) button4Event(event, frame) end)

-- Show the frame
frame:Show(true)
end

local co = coroutine.wrap(main)
co() -- start the coroutine

function Abort()
--frame:Destroy()
wx.wxMessageBox("Abort")
end
wx.wxGetApp():MainLoop()
end

--M6Control.M6Menu()

return M6Control

here is an example of the code i have been trying, i wanted to call the frame when doing a tool change, based on checking some registers that may be set..
and only call the frame if need be...

Thanks gary

?

Hi Brian,

?

Below is the code I have running at this time it works form the MDI right loads the dialog when I run the m6 script and I can exit it fine..

?

But when I run it in the g code the dialog runs fine but I get two copies if the dialog on the screen it seems to still be running ok no error’s and I can close both dialogs out with no errors

I know the code looks like crap but I’m not a programmer but did get it to work in the g code with no errors so that’s a start for me.

Any suggestions as to why it runs fine called from the MDI, but then displays 2 dialog boxes when called from the g code file?.

?

Thanks Gary

?

----this is in the m6 macro

?

function m6()

?

local inst = mc.mcGetInstance("M6 Toolchange")

?

local tchangeReg = mc.mcRegGetHandle(inst,"gRegs0/ATC/ToolDialog")

local rc = mc.mcRegSetValueString(tchangeReg,"ShowTchangeDlg")

?

?

-- Code to wait for the dialog to end

while(mc.mcRegGetValueString(tchangeReg) == "ShowTchangeDlg") do

??? wx.wxMilliSleep(500)

-- May want to add some code here in the event someone presses stop or kills the program

end

mc.mcRegSetValueString(tchangeReg, "NoTchangeDig")

local ReturnValue = mc.mcRegGetValueString(tchangeReg)

?

end

?

?

---this is it the screen load script

?

------ Tool change Dialog ------------------------

function ToolChangeDia()

local wx = require("wx")

??????????????? --inst = mc.mcGetInstance()

??????????????? local tchangeReg = mc.mcRegGetHandle(inst,"gRegs0/ATC/ToolDialog")

???????????????

local function ManualEvent(event)

??? coroutine.wrap(function()

??????? -- code for button 1 event

??????????????????????????????? Manual()

??? end)()

end

?

local function ManualTouchEvent(event)

??? coroutine.wrap(function()

??????? -- code for button 2 event

??????????????????????????????? ManualTouch()

??? end)()

end

?

local function ManualProbeEvent(event)

??? coroutine.wrap(function()

??????? -- code for button 3 event

??????????????????????????????? ManualProbe()

??? end)()

end

?

local function AbortEvent(event, frame)

??? coroutine.wrap(function()

??? Abort()

??????????????? --mc.mcRegSetValueString(M6reg,"0")

??? frame:Destroy()

??????? -- code for button 4 event

??? end)()

end

?

local function main()

??? -- Create a new frame

??? local frame = wx.wxFrame(wx.NULL, wx.wxID_ANY, "My Frame",

??????????????????????????? wx.wxDefaultPosition, wx.wxSize(340, 400))

?

??? -- Create Text above each button

??? local text1 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Button:\nTool must be in the Tool Table and offset set Swap tool out then Press Manual",

??????????????????????????????? wx.wxPoint(20, 10), wx.wxSize(150, 100))

??? local text2 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Touch:\nSwap tool out then Jog Z down to part surface use a feeler gauge, then Press Manual Touch",

???????????????? ???????????????wx.wxPoint(20, 70), wx.wxSize(150, 100))

??? local text3 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Probe:\nSwap tool out then put your touch off plate on top of part, Z will move down to above part surface and probe part, After Pressing Manual Touch",

??????????????????????????????? wx.wxPoint(20, 150), wx.wxSize(150, 100))

??? local text4 = wx.wxStaticText(frame, wx.wxID_ANY, "Abort:\nPress abort only if you cannot do a tool swap it will exit and also will disable the machine stop all code from running",

??????????????????????????????? wx.wxPoint(20, 260), wx.wxSize(150, 100))

?

??? -- Create buttons

??? local Manual = wx.wxButton(frame, wx.wxID_ANY, "Manual",

??????????????????????????????? wx.wxPoint(200, 20), wx.wxSize(100, 30))

??? local ManualTouch = wx.wxButton(frame, wx.wxID_ANY, "Manual Touch",

??????????????????????????????? wx.wxPoint(200, 90), wx.wxSize(100, 30))

??? local ManualProbe = wx.wxButton(frame, wx.wxID_ANY, "Manual Probe",

??????????????????????????????? wx.wxPoint(200, 180), wx.wxSize(100, 30))

??? local Abort = wx.wxButton(frame, wx.wxID_ANY, "Abort",

??????????????????????????????? wx.wxPoint(200, 280), wx.wxSize(100, 30))

?

??? -- Connect button events

??? Manual:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, ManualEvent)

??? ManualTouch:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, ManualTouchEvent)

??? ManualProbe:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, ManualProbeEvent)

??? Abort:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, function(event) AbortEvent(event, frame) end)

?

-- Show the frame

frame:Show(true)

end

?

local co = coroutine.wrap(main)

co() -- start the coroutine

mc.mcRegSetValueString(tchangeReg, "NoTchangeDig")

function Manual()

--frame:Destroy()

wx.wxMessageBox("Manual")

end

?

function ManualTouch()

--frame:Destroy()

wx.wxMessageBox("Manual Touch off")

end

?

function ManualProbe()

--frame:Destroy()

wx.wxMessageBox("Manual Probe")

end

?

function Abort()

--frame:Destroy()

wx.wxMessageBox("Abort")

mc.mcRegSetValueString(tchangeReg, "NoTchangeDig")

end

--wx.wxGetApp():MainLoop()

mc.mcRegSetValueString(tchangeReg, "NoTchangeDig")

return nul

end

?

?

---this is in the PLC

?

----tool change dialog----

local inst = mc.mcGetInstance("M6 Toolchange Dialog")

toolchangeReg = mc.mcRegGetHandle(inst,"gRegs0/ATC/ToolDialog")

if ( mc.mcRegGetValueString(toolchangeReg) == "ShowTchangeDlg" ) then?? -- put the handle to the toolchange Osig in the global table

????toolchangeActiveReg = mc.mcSignalGetHandle(inst,mc.OSIG_TOOL_CHANGE)

end

--if ( toolchangeReg == nul ) then

--end

--else

? if ( mc.mcRegGetValueString(toolchangeReg) == "ShowTchangeDlg" and mc.mcSignalGetState( toolchangeActiveReg ) == 1 ) then

??? dlghandle = ToolChangeDia() -- Remember to pass back something from the dialog so we know it has been done

? elseif ( mc.mcRegGetValueString( toolchangeReg ) ~= "ShowTchangeDlg" ) then

????????dlghandle = nil-- kill the dialog so the garbage collector can get it back

? end

?

?

Sent from for Windows

?

From: Brian Barker
Sent: Monday, January 30, 2023 8:47 AM
To: [email protected]
Subject: Re: [MachCNC] wxlua frame

?

Hi Gary,

Sorry I was coaching robotics and had a comp this weekend so I was flat out :) The good news is that I had 2 more teems qualify for states! Okay back to work!?

?

We don't have any real library for semaphores, it's really telling you how you need to architect the system. Let me see if I can make something to show you how I would do it in a screen. But basically we don't allow graphics in the Macro's (Mostly because we didn't see the need and I think this is still the best). How you communicate to the macro's is through registers. The registers are the only way to have thread safe data in Lua to the rest of the system. Having graphics in the Mcodes could and would put the events into the macro's / Gcode thread and we REALLY don't want that! By communicating via registers it will allow you to have your dialog and not have the Gcode interpreter thread plugged up with graphics.

?

Now onto the solution!

?

You need to setup a register in the register conifig dialog:

Mine is at the following path "iRegs0/ToolSettings"

?

So in my M6 macro I would put the following:

local inst = mc.mcGetInstance("M6 Toolchange")
local tchangeReg = mc.mcRegGetHandle(inst,"iRegs0/ToolSettings")
local rc = mc.mcRegSetValue(tchangeReg,"ShowTchangeDlg")

-- Code to wait for the dialog to end
while(mc.mcRegGetValue(tchangeReg) == "ShowTchangeDlg") do
?? ?wx.wxMilliSleep(500)
?-- May want to add some code here in the event someone presses stop or kills the program
end
local ReturnValue = mc.mcRegGetValue(tchangeReg)

-- Continue with the toolchanger and you have the return in the register.

?

?

Now in the screen you can put your dialog in a function and check to see if you need to launch it in the PLC script :

local inst = mc.mcGetInstance("M6 Toolchange Dialog")
if(toolchangeActiveReg == nil)then -- put the handle to the toolchange Osig in the global table
?? ?toolchangeActiveReg = mc.mcSignalGetHandle(inst,mc.OSIG_TOOL_CHANGE)
end
if(tchangeDlogReg == nil)then
tchangeDlogReg = mc.mcRegGetHandle(inst,"iRegs0/ToolSettings")
end

if(mc.mcRegGetValue(tchangeReg) == "ShowTchangeDlg" and mc.mcSignalGetState(toolchangeActiveReg) == 1 && dlghandle == nil)then
?? ?
?? ?dlghandle = YourDialogFunction()-- Remember to pass back something from the dialog so we know it has been done
else
?? ?if(mc.mcRegGetValue(tchangeReg) ~= "ShowTchangeDlg" and? dlghandle ~= nil) then
?? ??? ?dlghandle = nil-- kill the dialog so the garbage collector can get it back
?? ?end
end

?

?

This is all untested and 100% can be changed but I think it clearly shows how I would do it :)

?

Hope that helps!

______________________________

?

Brian Barker

Engineering / Development

ArtSoft | Newfangled Solutions

Livermore Falls, Maine (USA)

Webpage: 

On 1/27/2023 9:38 AM, Gary wrote:

Ok thanks Brian,

?

I will try them out, by in the screen not sure what screen the frame? The screen load script ?

?

What my real goal was or is, I have a rotary tool changer, I am checking the m6 macro to see if the new tool is in the rack if not the switching to a manual tool change, the dialog was just a thought if the tool not in rack then give the option to manual tool change and continue is the tool is in the tool table an offset it set, or is tool not in the table and or offset not set then jog down and touch off top of part, or the option to use a touch off plate and probe it, leaving the choices up to me hence the frame and buttons..

?

I will most likely need help I am starting to go over my head now… I did try local semaphore = require("semaphore")

but doesn’t seem to be in the library…. And not sure if it was were the directory is located…

?

Thangs Gary

?

Sent from for Windows

?

From: Brian Barker
Sent: Friday, January 27, 2023 8:36 AM
To: [email protected]
Subject: Re: [MachCNC] wxlua frame

?

Hi Gary,

What you will need to do is put this code in the screen (where graphics are done). In your M6 set a register to a value that will trigger the dialog in the screen. You will need a spinlock checking to see when your dialog is done (set some other register stating that the Macro needs to continue) . We do have some other tools to hold a macro (mcFileHoldAquire) but it's a bit more advanced (This is the tool that allows the manual tool change to work) and what is also doing the the work for the mcCntlWaitOnCycleStart command. Try that out and tell me how it works for you. If you would like a hand doing it I am more than happy to assist you with the programming. I think this would be a cool router feature :)

?

thanks
Brian

?

______________________________

?

Brian Barker

Engineering / Development

ArtSoft | Newfangled Solutions

Livermore Falls, Maine (USA)

Webpage: 

On 1/26/2023 7:00 PM, Gary wrote:

----------------------------------------------------------
-- frame with 4 buttons inside a Coroutine module script
-- Runs from a button script
----------------------------------------------------------
inst = mc.mcGetInstance()
local path = mc.mcCntlGetMachDir(inst)
package.path = path .."\\Modules\\?.lua;"

??? --mach4ProbeMenu module
package.loaded.mach4ProbeMenu = nil
pb = require "mach4ProbeMenu"
?? ?
pb.M6Menu()



----------------------------------------------------------
-- frame with 4 buttons inside a Coroutine modual script
-- this goes into the modules folder
----------------------------------------------------------
------------------------------------------------------------------------------------
-- Module to be called with button script
-- So far i have not been able to get to run correct being called from a g code file
------------------------------------------------------------------------------------
local M6Control = {}

function M6Control.M6Menu()

local function button1Event(event)
??? coroutine.wrap(function()
??????? -- code for button 1 event
??? end)()
end

local function button2Event(event)
??? coroutine.wrap(function()
??????? -- code for button 2 event
??? end)()
end

local function button3Event(event)
??? coroutine.wrap(function()
??????? -- code for button 3 event
??? end)()
end

local function button4Event(event, frame)
??? coroutine.wrap(function()
??? Abort()
??? frame:Destroy()
??????? -- code for button 4 event
??? end)()
end

local function main()
??? -- Create a new frame
??? local frame = wx.wxFrame(wx.NULL, wx.wxID_ANY, "My Frame",
??????????????????????????? wx.wxDefaultPosition, wx.wxSize(340, 400))

??? -- Create Text above each button
??? local text1 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Button:\nTool must be in the Tool Table and offset set Swap tool out then Press Manual",
??????????????????????????????? wx.wxPoint(20, 10), wx.wxSize(150, 100))
??? local text2 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Touch:\nSwap tool out then Jog Z down to part surface use a feeler gauge, then Press Manual Touch",
??????????????????????????????? wx.wxPoint(20, 70), wx.wxSize(150, 100))
??? local text3 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Probe:\nSwap tool out then put your touch off plate on top of part, Z will move down to above part surface and probe part, After Pressing Manual Touch",
??????????????????????????????? wx.wxPoint(20, 150), wx.wxSize(150, 100))
??? local text4 = wx.wxStaticText(frame, wx.wxID_ANY, "Abort:\nPress abort only if you cannot do a tool swap it will exit and also will disable the machine stop all code from running",
??????????????????????????????? wx.wxPoint(20, 250), wx.wxSize(150, 100))

??? -- Create buttons
??? local button1 = wx.wxButton(frame, wx.wxID_ANY, "Manual",
??????????????????????????????? wx.wxPoint(200, 20), wx.wxSize(100, 30))
??? local button2 = wx.wxButton(frame, wx.wxID_ANY, "Manual Touch",
??????????????????????????????? wx.wxPoint(200, 90), wx.wxSize(100, 30))
??? local button3 = wx.wxButton(frame, wx.wxID_ANY, "Manual Probe",
??????????????????????????????? wx.wxPoint(200, 180), wx.wxSize(100, 30))
??? local button4 = wx.wxButton(frame, wx.wxID_ANY, "Abort",
??????????????????????????????? wx.wxPoint(200, 270), wx.wxSize(100, 30))

??? -- Connect button events
??? button1:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button1Event)
??? button2:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button2Event)
??? button3:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button3Event)
??? button4:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, function(event) button4Event(event, frame) end)

-- Show the frame
frame:Show(true)
end

local co = coroutine.wrap(main)
co() -- start the coroutine

function Abort()
--frame:Destroy()
wx.wxMessageBox("Abort")
end
wx.wxGetApp():MainLoop()
end

--M6Control.M6Menu()

return M6Control

here is an example of the code i have been trying, i wanted to call the frame when doing a tool change, based on checking some registers that may be set..
and only call the frame if need be...

Thanks gary

?

?

Hi Brian,

?

Below is the code I have running at this time it works form the MDI right loads the dialog when I run the m6 script and I can exit it fine..

?

But when I run it in the g code the dialog runs fine but I get two copies if the dialog on the screen it seems to still be running ok no error’s and I can close both dialogs out with no errors

I know the code looks like crap but I’m not a programmer but did get it to work in the g code with no errors so that’s a start for me.

Any suggestions as to why it runs fine called from the MDI, but then displays 2 dialog boxes when called from the g code file?.

?

Thanks Gary

?

----this is in the m6 macro

?

function m6()

?

local inst = mc.mcGetInstance("M6 Toolchange")

?

local tchangeReg = mc.mcRegGetHandle(inst,"gRegs0/ATC/ToolDialog")

local rc = mc.mcRegSetValueString(tchangeReg,"ShowTchangeDlg")

?

?

-- Code to wait for the dialog to end

while(mc.mcRegGetValueString(tchangeReg) == "ShowTchangeDlg") do

??? wx.wxMilliSleep(500)

-- May want to add some code here in the event someone presses stop or kills the program

end

mc.mcRegSetValueString(tchangeReg, "NoTchangeDig")

local ReturnValue = mc.mcRegGetValueString(tchangeReg)

?

end

?

?

---this is it the screen load script

?

------ Tool change Dialog ------------------------

function ToolChangeDia()

local wx = require("wx")

??????????????? --inst = mc.mcGetInstance()

??????????????? local tchangeReg = mc.mcRegGetHandle(inst,"gRegs0/ATC/ToolDialog")

???????????????

local function ManualEvent(event)

??? coroutine.wrap(function()

??????? -- code for button 1 event

??????????????????????????????? Manual()

??? end)()

end

?

local function ManualTouchEvent(event)

??? coroutine.wrap(function()

??????? -- code for button 2 event

??????????????????????????????? ManualTouch()

??? end)()

end

?

local function ManualProbeEvent(event)

??? coroutine.wrap(function()

??????? -- code for button 3 event

??????????????????????????????? ManualProbe()

??? end)()

end

?

local function AbortEvent(event, frame)

??? coroutine.wrap(function()

??? Abort()

??????????????? --mc.mcRegSetValueString(M6reg,"0")

??? frame:Destroy()

??????? -- code for button 4 event

??? end)()

end

?

local function main()

??? -- Create a new frame

??? local frame = wx.wxFrame(wx.NULL, wx.wxID_ANY, "My Frame",

??????????????????????????? wx.wxDefaultPosition, wx.wxSize(340, 400))

?

??? -- Create Text above each button

??? local text1 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Button:\nTool must be in the Tool Table and offset set Swap tool out then Press Manual",

??????????????????????????????? wx.wxPoint(20, 10), wx.wxSize(150, 100))

??? local text2 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Touch:\nSwap tool out then Jog Z down to part surface use a feeler gauge, then Press Manual Touch",

???????????????? ???????????????wx.wxPoint(20, 70), wx.wxSize(150, 100))

??? local text3 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Probe:\nSwap tool out then put your touch off plate on top of part, Z will move down to above part surface and probe part, After Pressing Manual Touch",

??????????????????????????????? wx.wxPoint(20, 150), wx.wxSize(150, 100))

??? local text4 = wx.wxStaticText(frame, wx.wxID_ANY, "Abort:\nPress abort only if you cannot do a tool swap it will exit and also will disable the machine stop all code from running",

??????????????????????????????? wx.wxPoint(20, 260), wx.wxSize(150, 100))

?

??? -- Create buttons

??? local Manual = wx.wxButton(frame, wx.wxID_ANY, "Manual",

??????????????????????????????? wx.wxPoint(200, 20), wx.wxSize(100, 30))

??? local ManualTouch = wx.wxButton(frame, wx.wxID_ANY, "Manual Touch",

??????????????????????????????? wx.wxPoint(200, 90), wx.wxSize(100, 30))

??? local ManualProbe = wx.wxButton(frame, wx.wxID_ANY, "Manual Probe",

??????????????????????????????? wx.wxPoint(200, 180), wx.wxSize(100, 30))

??? local Abort = wx.wxButton(frame, wx.wxID_ANY, "Abort",

??????????????????????????????? wx.wxPoint(200, 280), wx.wxSize(100, 30))

?

??? -- Connect button events

??? Manual:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, ManualEvent)

??? ManualTouch:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, ManualTouchEvent)

??? ManualProbe:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, ManualProbeEvent)

??? Abort:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, function(event) AbortEvent(event, frame) end)

?

-- Show the frame

frame:Show(true)

end

?

local co = coroutine.wrap(main)

co() -- start the coroutine

mc.mcRegSetValueString(tchangeReg, "NoTchangeDig")

function Manual()

--frame:Destroy()

wx.wxMessageBox("Manual")

end

?

function ManualTouch()

--frame:Destroy()

wx.wxMessageBox("Manual Touch off")

end

?

function ManualProbe()

--frame:Destroy()

wx.wxMessageBox("Manual Probe")

end

?

function Abort()

--frame:Destroy()

wx.wxMessageBox("Abort")

mc.mcRegSetValueString(tchangeReg, "NoTchangeDig")

end

--wx.wxGetApp():MainLoop()

mc.mcRegSetValueString(tchangeReg, "NoTchangeDig")

return nul

end

?

?

---this is in the PLC

?

----tool change dialog----

local inst = mc.mcGetInstance("M6 Toolchange Dialog")

toolchangeReg = mc.mcRegGetHandle(inst,"gRegs0/ATC/ToolDialog")

if ( mc.mcRegGetValueString(toolchangeReg) == "ShowTchangeDlg" ) then?? -- put the handle to the toolchange Osig in the global table

????toolchangeActiveReg = mc.mcSignalGetHandle(inst,mc.OSIG_TOOL_CHANGE)

end

--if ( toolchangeReg == nul ) then

--end

--else

? if ( mc.mcRegGetValueString(toolchangeReg) == "ShowTchangeDlg" and mc.mcSignalGetState( toolchangeActiveReg ) == 1 ) then

??? dlghandle = ToolChangeDia() -- Remember to pass back something from the dialog so we know it has been done

? elseif ( mc.mcRegGetValueString( toolchangeReg ) ~= "ShowTchangeDlg" ) then

????????dlghandle = nil-- kill the dialog so the garbage collector can get it back

? end

?

?

Sent from for Windows

?

From: Brian Barker
Sent: Monday, January 30, 2023 8:47 AM
To: [email protected]
Subject: Re: [MachCNC] wxlua frame

?

Hi Gary,

Sorry I was coaching robotics and had a comp this weekend so I was flat out :) The good news is that I had 2 more teems qualify for states! Okay back to work!?

?

We don't have any real library for semaphores, it's really telling you how you need to architect the system. Let me see if I can make something to show you how I would do it in a screen. But basically we don't allow graphics in the Macro's (Mostly because we didn't see the need and I think this is still the best). How you communicate to the macro's is through registers. The registers are the only way to have thread safe data in Lua to the rest of the system. Having graphics in the Mcodes could and would put the events into the macro's / Gcode thread and we REALLY don't want that! By communicating via registers it will allow you to have your dialog and not have the Gcode interpreter thread plugged up with graphics.

?

Now onto the solution!

?

You need to setup a register in the register conifig dialog:

Mine is at the following path "iRegs0/ToolSettings"

?

So in my M6 macro I would put the following:

local inst = mc.mcGetInstance("M6 Toolchange")
local tchangeReg = mc.mcRegGetHandle(inst,"iRegs0/ToolSettings")
local rc = mc.mcRegSetValue(tchangeReg,"ShowTchangeDlg")

-- Code to wait for the dialog to end
while(mc.mcRegGetValue(tchangeReg) == "ShowTchangeDlg") do
?? ?wx.wxMilliSleep(500)
?-- May want to add some code here in the event someone presses stop or kills the program
end
local ReturnValue = mc.mcRegGetValue(tchangeReg)

-- Continue with the toolchanger and you have the return in the register.

?

?

Now in the screen you can put your dialog in a function and check to see if you need to launch it in the PLC script :

local inst = mc.mcGetInstance("M6 Toolchange Dialog")
if(toolchangeActiveReg == nil)then -- put the handle to the toolchange Osig in the global table
?? ?toolchangeActiveReg = mc.mcSignalGetHandle(inst,mc.OSIG_TOOL_CHANGE)
end
if(tchangeDlogReg == nil)then
tchangeDlogReg = mc.mcRegGetHandle(inst,"iRegs0/ToolSettings")
end

if(mc.mcRegGetValue(tchangeReg) == "ShowTchangeDlg" and mc.mcSignalGetState(toolchangeActiveReg) == 1 && dlghandle == nil)then
?? ?
?? ?dlghandle = YourDialogFunction()-- Remember to pass back something from the dialog so we know it has been done
else
?? ?if(mc.mcRegGetValue(tchangeReg) ~= "ShowTchangeDlg" and? dlghandle ~= nil) then
?? ??? ?dlghandle = nil-- kill the dialog so the garbage collector can get it back
?? ?end
end

?

?

This is all untested and 100% can be changed but I think it clearly shows how I would do it :)

?

Hope that helps!

______________________________

?

Brian Barker

Engineering / Development

ArtSoft | Newfangled Solutions

Livermore Falls, Maine (USA)

Webpage: 

On 1/27/2023 9:38 AM, Gary wrote:

Ok thanks Brian,

?

I will try them out, by in the screen not sure what screen the frame? The screen load script ?

?

What my real goal was or is, I have a rotary tool changer, I am checking the m6 macro to see if the new tool is in the rack if not the switching to a manual tool change, the dialog was just a thought if the tool not in rack then give the option to manual tool change and continue is the tool is in the tool table an offset it set, or is tool not in the table and or offset not set then jog down and touch off top of part, or the option to use a touch off plate and probe it, leaving the choices up to me hence the frame and buttons..

?

I will most likely need help I am starting to go over my head now… I did try local semaphore = require("semaphore")

but doesn’t seem to be in the library…. And not sure if it was were the directory is located…

?

Thangs Gary

?

Sent from for Windows

?

From: Brian Barker
Sent: Friday, January 27, 2023 8:36 AM
To: [email protected]
Subject: Re: [MachCNC] wxlua frame

?

Hi Gary,

What you will need to do is put this code in the screen (where graphics are done). In your M6 set a register to a value that will trigger the dialog in the screen. You will need a spinlock checking to see when your dialog is done (set some other register stating that the Macro needs to continue) . We do have some other tools to hold a macro (mcFileHoldAquire) but it's a bit more advanced (This is the tool that allows the manual tool change to work) and what is also doing the the work for the mcCntlWaitOnCycleStart command. Try that out and tell me how it works for you. If you would like a hand doing it I am more than happy to assist you with the programming. I think this would be a cool router feature :)

?

thanks
Brian

?

______________________________

?

Brian Barker

Engineering / Development

ArtSoft | Newfangled Solutions

Livermore Falls, Maine (USA)

Webpage: 

On 1/26/2023 7:00 PM, Gary wrote:

----------------------------------------------------------
-- frame with 4 buttons inside a Coroutine module script
-- Runs from a button script
----------------------------------------------------------
inst = mc.mcGetInstance()
local path = mc.mcCntlGetMachDir(inst)
package.path = path .."\\Modules\\?.lua;"

??? --mach4ProbeMenu module
package.loaded.mach4ProbeMenu = nil
pb = require "mach4ProbeMenu"
?? ?
pb.M6Menu()



----------------------------------------------------------
-- frame with 4 buttons inside a Coroutine modual script
-- this goes into the modules folder
----------------------------------------------------------
------------------------------------------------------------------------------------
-- Module to be called with button script
-- So far i have not been able to get to run correct being called from a g code file
------------------------------------------------------------------------------------
local M6Control = {}

function M6Control.M6Menu()

local function button1Event(event)
??? coroutine.wrap(function()
??????? -- code for button 1 event
??? end)()
end

local function button2Event(event)
??? coroutine.wrap(function()
??????? -- code for button 2 event
??? end)()
end

local function button3Event(event)
??? coroutine.wrap(function()
??????? -- code for button 3 event
??? end)()
end

local function button4Event(event, frame)
??? coroutine.wrap(function()
??? Abort()
??? frame:Destroy()
??????? -- code for button 4 event
??? end)()
end

local function main()
??? -- Create a new frame
??? local frame = wx.wxFrame(wx.NULL, wx.wxID_ANY, "My Frame",
??????????????????????????? wx.wxDefaultPosition, wx.wxSize(340, 400))

??? -- Create Text above each button
??? local text1 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Button:\nTool must be in the Tool Table and offset set Swap tool out then Press Manual",
??????????????????????????????? wx.wxPoint(20, 10), wx.wxSize(150, 100))
??? local text2 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Touch:\nSwap tool out then Jog Z down to part surface use a feeler gauge, then Press Manual Touch",
??????????????????????????????? wx.wxPoint(20, 70), wx.wxSize(150, 100))
??? local text3 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Probe:\nSwap tool out then put your touch off plate on top of part, Z will move down to above part surface and probe part, After Pressing Manual Touch",
??????????????????????????????? wx.wxPoint(20, 150), wx.wxSize(150, 100))
??? local text4 = wx.wxStaticText(frame, wx.wxID_ANY, "Abort:\nPress abort only if you cannot do a tool swap it will exit and also will disable the machine stop all code from running",
??????????????????????????????? wx.wxPoint(20, 250), wx.wxSize(150, 100))

??? -- Create buttons
??? local button1 = wx.wxButton(frame, wx.wxID_ANY, "Manual",
??????????????????????????????? wx.wxPoint(200, 20), wx.wxSize(100, 30))
??? local button2 = wx.wxButton(frame, wx.wxID_ANY, "Manual Touch",
??????????????????????????????? wx.wxPoint(200, 90), wx.wxSize(100, 30))
??? local button3 = wx.wxButton(frame, wx.wxID_ANY, "Manual Probe",
??????????????????????????????? wx.wxPoint(200, 180), wx.wxSize(100, 30))
??? local button4 = wx.wxButton(frame, wx.wxID_ANY, "Abort",
??????????????????????????????? wx.wxPoint(200, 270), wx.wxSize(100, 30))

??? -- Connect button events
??? button1:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button1Event)
??? button2:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button2Event)
??? button3:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button3Event)
??? button4:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, function(event) button4Event(event, frame) end)

-- Show the frame
frame:Show(true)
end

local co = coroutine.wrap(main)
co() -- start the coroutine

function Abort()
--frame:Destroy()
wx.wxMessageBox("Abort")
end
wx.wxGetApp():MainLoop()
end

--M6Control.M6Menu()

return M6Control

here is an example of the code i have been trying, i wanted to call the frame when doing a tool change, based on checking some registers that may be set..
and only call the frame if need be...

Thanks gary

?

?

?

Hi Gary,

Your really really close! Here is what I did to make it so you can't have more than one dialog show at a time.

?

In your PLC script:

local inst = mc.mcGetInstance("M6 Toolchange Dialog")
if(toolchangeReg == nil )then
?? ?toolchangeReg = mc.mcRegGetHandle(inst,"gRegs0/ATC/ToolDialog")
end

? if ( mc.mcRegGetValueString(toolchangeReg) == "ShowTchangeDlg" and dlghandle == nil ) then

??? dlghandle = ToolChangeDia() -- Remember to pass back something from the dialog so we know it has been done

? elseif ( mc.mcRegGetValueString( toolchangeReg ) ~= "ShowTchangeDlg" ) then

??????? dlghandle = nil-- kill the dialog so the garbage collector can get it back

end

You need to use the dlghandle to see if you have a dialog or not.

?

Test rest of it seems fine. I like what your doing!

?

______________________________

?

Brian Barker

Engineering / Development

ArtSoft | Newfangled Solutions

Livermore Falls, Maine (USA)

Webpage: 

Hi Brian,

?

Below is the code I have running at this time it works form the MDI right loads the dialog when I run the m6 script and I can exit it fine..

?

But when I run it in the g code the dialog runs fine but I get two copies if the dialog on the screen it seems to still be running ok no error’s and I can close both dialogs out with no errors

I know the code looks like crap but I’m not a programmer but did get it to work in the g code with no errors so that’s a start for me.

Any suggestions as to why it runs fine called from the MDI, but then displays 2 dialog boxes when called from the g code file?.

?

Thanks Gary

?

----this is in the m6 macro

?

function m6()

?

local inst = mc.mcGetInstance("M6 Toolchange")

?

local tchangeReg = mc.mcRegGetHandle(inst,"gRegs0/ATC/ToolDialog")

local rc = mc.mcRegSetValueString(tchangeReg,"ShowTchangeDlg")

?

?

-- Code to wait for the dialog to end

while(mc.mcRegGetValueString(tchangeReg) == "ShowTchangeDlg") do

??? wx.wxMilliSleep(500)

-- May want to add some code here in the event someone presses stop or kills the program

end

mc.mcRegSetValueString(tchangeReg, "NoTchangeDig")

local ReturnValue = mc.mcRegGetValueString(tchangeReg)

?

end

?

?

---this is it the screen load script

?

------ Tool change Dialog ------------------------

function ToolChangeDia()

local wx = require("wx")

??????????????? --inst = mc.mcGetInstance()

??????????????? local tchangeReg = mc.mcRegGetHandle(inst,"gRegs0/ATC/ToolDialog")

???????????????

local function ManualEvent(event)

??? coroutine.wrap(function()

??????? -- code for button 1 event

??????????????????????????????? Manual()

??? end)()

end

?

local function ManualTouchEvent(event)

??? coroutine.wrap(function()

??????? -- code for button 2 event

??????????????????????????????? ManualTouch()

??? end)()

end

?

local function ManualProbeEvent(event)

??? coroutine.wrap(function()

??????? -- code for button 3 event

??????????????????????????????? ManualProbe()

??? end)()

end

?

local function AbortEvent(event, frame)

??? coroutine.wrap(function()

??? Abort()

??????????????? --mc.mcRegSetValueString(M6reg,"0")

??? frame:Destroy()

??????? -- code for button 4 event

??? end)()

end

?

local function main()

??? -- Create a new frame

??? local frame = wx.wxFrame(wx.NULL, wx.wxID_ANY, "My Frame",

??????????????????????????? wx.wxDefaultPosition, wx.wxSize(340, 400))

?

??? -- Create Text above each button

??? local text1 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Button:\nTool must be in the Tool Table and offset set Swap tool out then Press Manual",

??????????????????????????????? wx.wxPoint(20, 10), wx.wxSize(150, 100))

??? local text2 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Touch:\nSwap tool out then Jog Z down to part surface use a feeler gauge, then Press Manual Touch",

???????????????? ???????????????wx.wxPoint(20, 70), wx.wxSize(150, 100))

??? local text3 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Probe:\nSwap tool out then put your touch off plate on top of part, Z will move down to above part surface and probe part, After Pressing Manual Touch",

??????????????????????????????? wx.wxPoint(20, 150), wx.wxSize(150, 100))

??? local text4 = wx.wxStaticText(frame, wx.wxID_ANY, "Abort:\nPress abort only if you cannot do a tool swap it will exit and also will disable the machine stop all code from running",

??????????????????????????????? wx.wxPoint(20, 260), wx.wxSize(150, 100))

?

??? -- Create buttons

??? local Manual = wx.wxButton(frame, wx.wxID_ANY, "Manual",

??????????????????????????????? wx.wxPoint(200, 20), wx.wxSize(100, 30))

??? local ManualTouch = wx.wxButton(frame, wx.wxID_ANY, "Manual Touch",

??????????????????????????????? wx.wxPoint(200, 90), wx.wxSize(100, 30))

??? local ManualProbe = wx.wxButton(frame, wx.wxID_ANY, "Manual Probe",

??????????????????????????????? wx.wxPoint(200, 180), wx.wxSize(100, 30))

??? local Abort = wx.wxButton(frame, wx.wxID_ANY, "Abort",

??????????????????????????????? wx.wxPoint(200, 280), wx.wxSize(100, 30))

?

??? -- Connect button events

??? Manual:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, ManualEvent)

??? ManualTouch:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, ManualTouchEvent)

??? ManualProbe:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, ManualProbeEvent)

??? Abort:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, function(event) AbortEvent(event, frame) end)

?

-- Show the frame

frame:Show(true)

end

?

local co = coroutine.wrap(main)

co() -- start the coroutine

mc.mcRegSetValueString(tchangeReg, "NoTchangeDig")

function Manual()

--frame:Destroy()

wx.wxMessageBox("Manual")

end

?

function ManualTouch()

--frame:Destroy()

wx.wxMessageBox("Manual Touch off")

end

?

function ManualProbe()

--frame:Destroy()

wx.wxMessageBox("Manual Probe")

end

?

function Abort()

--frame:Destroy()

wx.wxMessageBox("Abort")

mc.mcRegSetValueString(tchangeReg, "NoTchangeDig")

end

--wx.wxGetApp():MainLoop()

mc.mcRegSetValueString(tchangeReg, "NoTchangeDig")

return nul

end

?

?

---this is in the PLC

?

----tool change dialog----

local inst = mc.mcGetInstance("M6 Toolchange Dialog")

toolchangeReg = mc.mcRegGetHandle(inst,"gRegs0/ATC/ToolDialog")

if ( mc.mcRegGetValueString(toolchangeReg) == "ShowTchangeDlg" ) then?? -- put the handle to the toolchange Osig in the global table

????toolchangeActiveReg = mc.mcSignalGetHandle(inst,mc.OSIG_TOOL_CHANGE)

end

--if ( toolchangeReg == nul ) then

--end

--else

? if ( mc.mcRegGetValueString(toolchangeReg) == "ShowTchangeDlg" and mc.mcSignalGetState( toolchangeActiveReg ) == 1 ) then

??? dlghandle = ToolChangeDia() -- Remember to pass back something from the dialog so we know it has been done

? elseif ( mc.mcRegGetValueString( toolchangeReg ) ~= "ShowTchangeDlg" ) then

????????dlghandle = nil-- kill the dialog so the garbage collector can get it back

? end

?

?

Sent from for Windows

?

From: Brian Barker
Sent: Monday, January 30, 2023 8:47 AM
To: [email protected]
Subject: Re: [MachCNC] wxlua frame

?

Hi Gary,

Sorry I was coaching robotics and had a comp this weekend so I was flat out :) The good news is that I had 2 more teems qualify for states! Okay back to work!?

?

We don't have any real library for semaphores, it's really telling you how you need to architect the system. Let me see if I can make something to show you how I would do it in a screen. But basically we don't allow graphics in the Macro's (Mostly because we didn't see the need and I think this is still the best). How you communicate to the macro's is through registers. The registers are the only way to have thread safe data in Lua to the rest of the system. Having graphics in the Mcodes could and would put the events into the macro's / Gcode thread and we REALLY don't want that! By communicating via registers it will allow you to have your dialog and not have the Gcode interpreter thread plugged up with graphics.

?

Now onto the solution!

?

You need to setup a register in the register conifig dialog:

Mine is at the following path "iRegs0/ToolSettings"

?

So in my M6 macro I would put the following:

local inst = mc.mcGetInstance("M6 Toolchange")
local tchangeReg = mc.mcRegGetHandle(inst,"iRegs0/ToolSettings")
local rc = mc.mcRegSetValue(tchangeReg,"ShowTchangeDlg")

-- Code to wait for the dialog to end
while(mc.mcRegGetValue(tchangeReg) == "ShowTchangeDlg") do
?? ?wx.wxMilliSleep(500)
?-- May want to add some code here in the event someone presses stop or kills the program
end
local ReturnValue = mc.mcRegGetValue(tchangeReg)

-- Continue with the toolchanger and you have the return in the register.

?

?

Now in the screen you can put your dialog in a function and check to see if you need to launch it in the PLC script :

local inst = mc.mcGetInstance("M6 Toolchange Dialog")
if(toolchangeActiveReg == nil)then -- put the handle to the toolchange Osig in the global table
?? ?toolchangeActiveReg = mc.mcSignalGetHandle(inst,mc.OSIG_TOOL_CHANGE)
end
if(tchangeDlogReg == nil)then
tchangeDlogReg = mc.mcRegGetHandle(inst,"iRegs0/ToolSettings")
end

if(mc.mcRegGetValue(tchangeReg) == "ShowTchangeDlg" and mc.mcSignalGetState(toolchangeActiveReg) == 1 && dlghandle == nil)then
?? ?
?? ?dlghandle = YourDialogFunction()-- Remember to pass back something from the dialog so we know it has been done
else
?? ?if(mc.mcRegGetValue(tchangeReg) ~= "ShowTchangeDlg" and? dlghandle ~= nil) then
?? ??? ?dlghandle = nil-- kill the dialog so the garbage collector can get it back
?? ?end
end

?

?

This is all untested and 100% can be changed but I think it clearly shows how I would do it :)

?

Hope that helps!

______________________________

?

Brian Barker

Engineering / Development

ArtSoft | Newfangled Solutions

Livermore Falls, Maine (USA)

Webpage: 

On 1/27/2023 9:38 AM, Gary wrote:

Ok thanks Brian,

?

I will try them out, by in the screen not sure what screen the frame? The screen load script ?

?

What my real goal was or is, I have a rotary tool changer, I am checking the m6 macro to see if the new tool is in the rack if not the switching to a manual tool change, the dialog was just a thought if the tool not in rack then give the option to manual tool change and continue is the tool is in the tool table an offset it set, or is tool not in the table and or offset not set then jog down and touch off top of part, or the option to use a touch off plate and probe it, leaving the choices up to me hence the frame and buttons..

?

I will most likely need help I am starting to go over my head now… I did try local semaphore = require("semaphore")

but doesn’t seem to be in the library…. And not sure if it was were the directory is located…

?

Thangs Gary

?

Sent from for Windows

?

From: Brian Barker
Sent: Friday, January 27, 2023 8:36 AM
To: [email protected]
Subject: Re: [MachCNC] wxlua frame

?

Hi Gary,

What you will need to do is put this code in the screen (where graphics are done). In your M6 set a register to a value that will trigger the dialog in the screen. You will need a spinlock checking to see when your dialog is done (set some other register stating that the Macro needs to continue) . We do have some other tools to hold a macro (mcFileHoldAquire) but it's a bit more advanced (This is the tool that allows the manual tool change to work) and what is also doing the the work for the mcCntlWaitOnCycleStart command. Try that out and tell me how it works for you. If you would like a hand doing it I am more than happy to assist you with the programming. I think this would be a cool router feature :)

?

thanks
Brian

?

______________________________

?

Brian Barker

Engineering / Development

ArtSoft | Newfangled Solutions

Livermore Falls, Maine (USA)

Webpage: 

On 1/26/2023 7:00 PM, Gary wrote:

----------------------------------------------------------
-- frame with 4 buttons inside a Coroutine module script
-- Runs from a button script
----------------------------------------------------------
inst = mc.mcGetInstance()
local path = mc.mcCntlGetMachDir(inst)
package.path = path .."\\Modules\\?.lua;"

??? --mach4ProbeMenu module
package.loaded.mach4ProbeMenu = nil
pb = require "mach4ProbeMenu"
?? ?
pb.M6Menu()



----------------------------------------------------------
-- frame with 4 buttons inside a Coroutine modual script
-- this goes into the modules folder
----------------------------------------------------------
------------------------------------------------------------------------------------
-- Module to be called with button script
-- So far i have not been able to get to run correct being called from a g code file
------------------------------------------------------------------------------------
local M6Control = {}

function M6Control.M6Menu()

local function button1Event(event)
??? coroutine.wrap(function()
??????? -- code for button 1 event
??? end)()
end

local function button2Event(event)
??? coroutine.wrap(function()
??????? -- code for button 2 event
??? end)()
end

local function button3Event(event)
??? coroutine.wrap(function()
??????? -- code for button 3 event
??? end)()
end

local function button4Event(event, frame)
??? coroutine.wrap(function()
??? Abort()
??? frame:Destroy()
??????? -- code for button 4 event
??? end)()
end

local function main()
??? -- Create a new frame
??? local frame = wx.wxFrame(wx.NULL, wx.wxID_ANY, "My Frame",
??????????????????????????? wx.wxDefaultPosition, wx.wxSize(340, 400))

??? -- Create Text above each button
??? local text1 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Button:\nTool must be in the Tool Table and offset set Swap tool out then Press Manual",
??????????????????????????????? wx.wxPoint(20, 10), wx.wxSize(150, 100))
??? local text2 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Touch:\nSwap tool out then Jog Z down to part surface use a feeler gauge, then Press Manual Touch",
??????????????????????????????? wx.wxPoint(20, 70), wx.wxSize(150, 100))
??? local text3 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Probe:\nSwap tool out then put your touch off plate on top of part, Z will move down to above part surface and probe part, After Pressing Manual Touch",
??????????????????????????????? wx.wxPoint(20, 150), wx.wxSize(150, 100))
??? local text4 = wx.wxStaticText(frame, wx.wxID_ANY, "Abort:\nPress abort only if you cannot do a tool swap it will exit and also will disable the machine stop all code from running",
??????????????????????????????? wx.wxPoint(20, 250), wx.wxSize(150, 100))

??? -- Create buttons
??? local button1 = wx.wxButton(frame, wx.wxID_ANY, "Manual",
??????????????????????????????? wx.wxPoint(200, 20), wx.wxSize(100, 30))
??? local button2 = wx.wxButton(frame, wx.wxID_ANY, "Manual Touch",
??????????????????????????????? wx.wxPoint(200, 90), wx.wxSize(100, 30))
??? local button3 = wx.wxButton(frame, wx.wxID_ANY, "Manual Probe",
??????????????????????????????? wx.wxPoint(200, 180), wx.wxSize(100, 30))
??? local button4 = wx.wxButton(frame, wx.wxID_ANY, "Abort",
??????????????????????????????? wx.wxPoint(200, 270), wx.wxSize(100, 30))

??? -- Connect button events
??? button1:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button1Event)
??? button2:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button2Event)
??? button3:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button3Event)
??? button4:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, function(event) button4Event(event, frame) end)

-- Show the frame
frame:Show(true)
end

local co = coroutine.wrap(main)
co() -- start the coroutine

function Abort()
--frame:Destroy()
wx.wxMessageBox("Abort")
end
wx.wxGetApp():MainLoop()
end

--M6Control.M6Menu()

return M6Control

here is an example of the code i have been trying, i wanted to call the frame when doing a tool change, based on checking some registers that may be set..
and only call the frame if need be...

Thanks gary

?

?

Hi Brian,

?

I gave that a shot but didn’t seem to change anything, still 2 dialogs when m6 used in a g code file, but it did add a new issue now when I boot mach4 the dialog is run when the screen comes up

It also runs if I am in the screen editor and then exit back to mach …

So still missing something haven’t had much time to play with today, but tomorrow I will do some more testing

I’m thinking is has something to do with this line now that I added the dighandle == nul check

? if ( mc.mcRegGetValueString(toolchangeReg) == "ShowTchangeDlg" and dlghandle == nil ) then

?

Thanks Gary

?

?

Sent from for Windows

?

From: Brian Barker
Sent: Wednesday, February 1, 2023 10:16 AM
To: [email protected]
Subject: Re: [MachCNC] wxlua frame

?

Hi Gary,

Your really really close! Here is what I did to make it so you can't have more than one dialog show at a time.

?

In your PLC script:

local inst = mc.mcGetInstance("M6 Toolchange Dialog")
if(toolchangeReg == nil )then
?? ?toolchangeReg = mc.mcRegGetHandle(inst,"gRegs0/ATC/ToolDialog")
end

? if ( mc.mcRegGetValueString(toolchangeReg) == "ShowTchangeDlg" and dlghandle == nil ) then

??? dlghandle = ToolChangeDia() -- Remember to pass back something from the dialog so we know it has been done

? elseif ( mc.mcRegGetValueString( toolchangeReg ) ~= "ShowTchangeDlg" ) then

??????? dlghandle = nil-- kill the dialog so the garbage collector can get it back

end

You need to use the dlghandle to see if you have a dialog or not.

?

Test rest of it seems fine. I like what your doing!

?

______________________________

?

Brian Barker

Engineering / Development

ArtSoft | Newfangled Solutions

Livermore Falls, Maine (USA)

Webpage: 

On 1/31/2023 7:00 PM, Gary wrote:

Hi Brian,

?

Below is the code I have running at this time it works form the MDI right loads the dialog when I run the m6 script and I can exit it fine..

?

But when I run it in the g code the dialog runs fine but I get two copies if the dialog on the screen it seems to still be running ok no error’s and I can close both dialogs out with no errors

I know the code looks like crap but I’m not a programmer but did get it to work in the g code with no errors so that’s a start for me.

Any suggestions as to why it runs fine called from the MDI, but then displays 2 dialog boxes when called from the g code file?.

?

Thanks Gary

?

----this is in the m6 macro

?

function m6()

?

local inst = mc.mcGetInstance("M6 Toolchange")

?

local tchangeReg = mc.mcRegGetHandle(inst,"gRegs0/ATC/ToolDialog")

local rc = mc.mcRegSetValueString(tchangeReg,"ShowTchangeDlg")

?

?

-- Code to wait for the dialog to end

while(mc.mcRegGetValueString(tchangeReg) == "ShowTchangeDlg") do

??? wx.wxMilliSleep(500)

-- May want to add some code here in the event someone presses stop or kills the program

end

mc.mcRegSetValueString(tchangeReg, "NoTchangeDig")

local ReturnValue = mc.mcRegGetValueString(tchangeReg)

?

end

?

?

---this is it the screen load script

?

------ Tool change Dialog ------------------------

function ToolChangeDia()

local wx = require("wx")

??????????????? --inst = mc.mcGetInstance()

??????????????? local tchangeReg = mc.mcRegGetHandle(inst,"gRegs0/ATC/ToolDialog")

???????????????

local function ManualEvent(event)

??? coroutine.wrap(function()

??????? -- code for button 1 event

??????????????????????????????? Manual()

??? end)()

end

?

local function ManualTouchEvent(event)

??? coroutine.wrap(function()

??????? -- code for button 2 event

??????????????????????????????? ManualTouch()

??? end)()

end

?

local function ManualProbeEvent(event)

??? coroutine.wrap(function()

??????? -- code for button 3 event

??????????????????????????????? ManualProbe()

??? end)()

end

?

local function AbortEvent(event, frame)

??? coroutine.wrap(function()

??? Abort()

??????????????? --mc.mcRegSetValueString(M6reg,"0")

??? frame:Destroy()

??????? -- code for button 4 event

??? end)()

end

?

local function main()

??? -- Create a new frame

??? local frame = wx.wxFrame(wx.NULL, wx.wxID_ANY, "My Frame",

??????????????????????????? wx.wxDefaultPosition, wx.wxSize(340, 400))

?

??? -- Create Text above each button

??? local text1 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Button:\nTool must be in the Tool Table and offset set Swap tool out then Press Manual",

??????????????????????????????? wx.wxPoint(20, 10), wx.wxSize(150, 100))

??? local text2 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Touch:\nSwap tool out then Jog Z down to part surface use a feeler gauge, then Press Manual Touch",

???????????????? ???????????????wx.wxPoint(20, 70), wx.wxSize(150, 100))

??? local text3 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Probe:\nSwap tool out then put your touch off plate on top of part, Z will move down to above part surface and probe part, After Pressing Manual Touch",

??????????????????????????????? wx.wxPoint(20, 150), wx.wxSize(150, 100))

??? local text4 = wx.wxStaticText(frame, wx.wxID_ANY, "Abort:\nPress abort only if you cannot do a tool swap it will exit and also will disable the machine stop all code from running",

??????????????????????????????? wx.wxPoint(20, 260), wx.wxSize(150, 100))

?

??? -- Create buttons

??? local Manual = wx.wxButton(frame, wx.wxID_ANY, "Manual",

??????????????????????????????? wx.wxPoint(200, 20), wx.wxSize(100, 30))

??? local ManualTouch = wx.wxButton(frame, wx.wxID_ANY, "Manual Touch",

??????????????????????????????? wx.wxPoint(200, 90), wx.wxSize(100, 30))

??? local ManualProbe = wx.wxButton(frame, wx.wxID_ANY, "Manual Probe",

??????????????????????????????? wx.wxPoint(200, 180), wx.wxSize(100, 30))

??? local Abort = wx.wxButton(frame, wx.wxID_ANY, "Abort",

??????????????????????????????? wx.wxPoint(200, 280), wx.wxSize(100, 30))

?

??? -- Connect button events

??? Manual:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, ManualEvent)

??? ManualTouch:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, ManualTouchEvent)

??? ManualProbe:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, ManualProbeEvent)

??? Abort:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, function(event) AbortEvent(event, frame) end)

?

-- Show the frame

frame:Show(true)

end

?

local co = coroutine.wrap(main)

co() -- start the coroutine

mc.mcRegSetValueString(tchangeReg, "NoTchangeDig")

function Manual()

--frame:Destroy()

wx.wxMessageBox("Manual")

end

?

function ManualTouch()

--frame:Destroy()

wx.wxMessageBox("Manual Touch off")

end

?

function ManualProbe()

--frame:Destroy()

wx.wxMessageBox("Manual Probe")

end

?

function Abort()

--frame:Destroy()

wx.wxMessageBox("Abort")

mc.mcRegSetValueString(tchangeReg, "NoTchangeDig")

end

--wx.wxGetApp():MainLoop()

mc.mcRegSetValueString(tchangeReg, "NoTchangeDig")

return nul

end

?

?

---this is in the PLC

?

----tool change dialog----

local inst = mc.mcGetInstance("M6 Toolchange Dialog")

toolchangeReg = mc.mcRegGetHandle(inst,"gRegs0/ATC/ToolDialog")

if ( mc.mcRegGetValueString(toolchangeReg) == "ShowTchangeDlg" ) then?? -- put the handle to the toolchange Osig in the global table

????toolchangeActiveReg = mc.mcSignalGetHandle(inst,mc.OSIG_TOOL_CHANGE)

end

--if ( toolchangeReg == nul ) then

--end

--else

? if ( mc.mcRegGetValueString(toolchangeReg) == "ShowTchangeDlg" and mc.mcSignalGetState( toolchangeActiveReg ) == 1 ) then

??? dlghandle = ToolChangeDia() -- Remember to pass back something from the dialog so we know it has been done

? elseif ( mc.mcRegGetValueString( toolchangeReg ) ~= "ShowTchangeDlg" ) then

????????dlghandle = nil-- kill the dialog so the garbage collector can get it back

? end

?

?

Sent from for Windows

?

From: Brian Barker
Sent: Monday, January 30, 2023 8:47 AM
To: [email protected]
Subject: Re: [MachCNC] wxlua frame

?

Hi Gary,

Sorry I was coaching robotics and had a comp this weekend so I was flat out :) The good news is that I had 2 more teems qualify for states! Okay back to work!?

?

We don't have any real library for semaphores, it's really telling you how you need to architect the system. Let me see if I can make something to show you how I would do it in a screen. But basically we don't allow graphics in the Macro's (Mostly because we didn't see the need and I think this is still the best). How you communicate to the macro's is through registers. The registers are the only way to have thread safe data in Lua to the rest of the system. Having graphics in the Mcodes could and would put the events into the macro's / Gcode thread and we REALLY don't want that! By communicating via registers it will allow you to have your dialog and not have the Gcode interpreter thread plugged up with graphics.

?

Now onto the solution!

?

You need to setup a register in the register conifig dialog:

Mine is at the following path "iRegs0/ToolSettings"

?

So in my M6 macro I would put the following:

local inst = mc.mcGetInstance("M6 Toolchange")
local tchangeReg = mc.mcRegGetHandle(inst,"iRegs0/ToolSettings")
local rc = mc.mcRegSetValue(tchangeReg,"ShowTchangeDlg")

-- Code to wait for the dialog to end
while(mc.mcRegGetValue(tchangeReg) == "ShowTchangeDlg") do
?? ?wx.wxMilliSleep(500)
?-- May want to add some code here in the event someone presses stop or kills the program
end
local ReturnValue = mc.mcRegGetValue(tchangeReg)

-- Continue with the toolchanger and you have the return in the register.

?

?

Now in the screen you can put your dialog in a function and check to see if you need to launch it in the PLC script :

local inst = mc.mcGetInstance("M6 Toolchange Dialog")
if(toolchangeActiveReg == nil)then -- put the handle to the toolchange Osig in the global table
?? ?toolchangeActiveReg = mc.mcSignalGetHandle(inst,mc.OSIG_TOOL_CHANGE)
end
if(tchangeDlogReg == nil)then
tchangeDlogReg = mc.mcRegGetHandle(inst,"iRegs0/ToolSettings")
end

if(mc.mcRegGetValue(tchangeReg) == "ShowTchangeDlg" and mc.mcSignalGetState(toolchangeActiveReg) == 1 && dlghandle == nil)then
?? ?
?? ?dlghandle = YourDialogFunction()-- Remember to pass back something from the dialog so we know it has been done
else
?? ?if(mc.mcRegGetValue(tchangeReg) ~= "ShowTchangeDlg" and? dlghandle ~= nil) then
?? ??? ?dlghandle = nil-- kill the dialog so the garbage collector can get it back
?? ?end
end

?

?

This is all untested and 100% can be changed but I think it clearly shows how I would do it :)

?

Hope that helps!

______________________________

?

Brian Barker

Engineering / Development

ArtSoft | Newfangled Solutions

Livermore Falls, Maine (USA)

Webpage: 

On 1/27/2023 9:38 AM, Gary wrote:

Ok thanks Brian,

?

I will try them out, by in the screen not sure what screen the frame? The screen load script ?

?

What my real goal was or is, I have a rotary tool changer, I am checking the m6 macro to see if the new tool is in the rack if not the switching to a manual tool change, the dialog was just a thought if the tool not in rack then give the option to manual tool change and continue is the tool is in the tool table an offset it set, or is tool not in the table and or offset not set then jog down and touch off top of part, or the option to use a touch off plate and probe it, leaving the choices up to me hence the frame and buttons..

?

I will most likely need help I am starting to go over my head now… I did try local semaphore = require("semaphore")

but doesn’t seem to be in the library…. And not sure if it was were the directory is located…

?

Thangs Gary

?

Sent from for Windows

?

From: Brian Barker
Sent: Friday, January 27, 2023 8:36 AM
To: [email protected]
Subject: Re: [MachCNC] wxlua frame

?

Hi Gary,

What you will need to do is put this code in the screen (where graphics are done). In your M6 set a register to a value that will trigger the dialog in the screen. You will need a spinlock checking to see when your dialog is done (set some other register stating that the Macro needs to continue) . We do have some other tools to hold a macro (mcFileHoldAquire) but it's a bit more advanced (This is the tool that allows the manual tool change to work) and what is also doing the the work for the mcCntlWaitOnCycleStart command. Try that out and tell me how it works for you. If you would like a hand doing it I am more than happy to assist you with the programming. I think this would be a cool router feature :)

?

thanks
Brian

?

______________________________

?

Brian Barker

Engineering / Development

ArtSoft | Newfangled Solutions

Livermore Falls, Maine (USA)

Webpage: 

On 1/26/2023 7:00 PM, Gary wrote:

----------------------------------------------------------
-- frame with 4 buttons inside a Coroutine module script
-- Runs from a button script
----------------------------------------------------------
inst = mc.mcGetInstance()
local path = mc.mcCntlGetMachDir(inst)
package.path = path .."\\Modules\\?.lua;"

??? --mach4ProbeMenu module
package.loaded.mach4ProbeMenu = nil
pb = require "mach4ProbeMenu"
?? ?
pb.M6Menu()



----------------------------------------------------------
-- frame with 4 buttons inside a Coroutine modual script
-- this goes into the modules folder
----------------------------------------------------------
------------------------------------------------------------------------------------
-- Module to be called with button script
-- So far i have not been able to get to run correct being called from a g code file
------------------------------------------------------------------------------------
local M6Control = {}

function M6Control.M6Menu()

local function button1Event(event)
??? coroutine.wrap(function()
??????? -- code for button 1 event
??? end)()
end

local function button2Event(event)
??? coroutine.wrap(function()
??????? -- code for button 2 event
??? end)()
end

local function button3Event(event)
??? coroutine.wrap(function()
??????? -- code for button 3 event
??? end)()
end

local function button4Event(event, frame)
??? coroutine.wrap(function()
??? Abort()
??? frame:Destroy()
??????? -- code for button 4 event
??? end)()
end

local function main()
??? -- Create a new frame
??? local frame = wx.wxFrame(wx.NULL, wx.wxID_ANY, "My Frame",
??????????????????????????? wx.wxDefaultPosition, wx.wxSize(340, 400))

??? -- Create Text above each button
??? local text1 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Button:\nTool must be in the Tool Table and offset set Swap tool out then Press Manual",
??????????????????????????????? wx.wxPoint(20, 10), wx.wxSize(150, 100))
??? local text2 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Touch:\nSwap tool out then Jog Z down to part surface use a feeler gauge, then Press Manual Touch",
??????????????????????????????? wx.wxPoint(20, 70), wx.wxSize(150, 100))
??? local text3 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Probe:\nSwap tool out then put your touch off plate on top of part, Z will move down to above part surface and probe part, After Pressing Manual Touch",
??????????????????????????????? wx.wxPoint(20, 150), wx.wxSize(150, 100))
??? local text4 = wx.wxStaticText(frame, wx.wxID_ANY, "Abort:\nPress abort only if you cannot do a tool swap it will exit and also will disable the machine stop all code from running",
??????????????????????????????? wx.wxPoint(20, 250), wx.wxSize(150, 100))

??? -- Create buttons
??? local button1 = wx.wxButton(frame, wx.wxID_ANY, "Manual",
??????????????????????????????? wx.wxPoint(200, 20), wx.wxSize(100, 30))
??? local button2 = wx.wxButton(frame, wx.wxID_ANY, "Manual Touch",
??????????????????????????????? wx.wxPoint(200, 90), wx.wxSize(100, 30))
??? local button3 = wx.wxButton(frame, wx.wxID_ANY, "Manual Probe",
??????????????????????????????? wx.wxPoint(200, 180), wx.wxSize(100, 30))
??? local button4 = wx.wxButton(frame, wx.wxID_ANY, "Abort",
??????????????????????????????? wx.wxPoint(200, 270), wx.wxSize(100, 30))

??? -- Connect button events
??? button1:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button1Event)
??? button2:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button2Event)
??? button3:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button3Event)
??? button4:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, function(event) button4Event(event, frame) end)

-- Show the frame
frame:Show(true)
end

local co = coroutine.wrap(main)
co() -- start the coroutine

function Abort()
--frame:Destroy()
wx.wxMessageBox("Abort")
end
wx.wxGetApp():MainLoop()
end

--M6Control.M6Menu()

return M6Control

here is an example of the code i have been trying, i wanted to call the frame when doing a tool change, based on checking some registers that may be set..
and only call the frame if need be...

Thanks gary

?

?

?

?

Hi Gary,

You can send the Profile off list and I can have a stab at getting it to work. You like that idea?

?

thanks
Brian

?

______________________________

?

Brian Barker

Engineering / Development

ArtSoft | Newfangled Solutions

Livermore Falls, Maine (USA)

Webpage: 

Hi Brian,

?

I gave that a shot but didn’t seem to change anything, still 2 dialogs when m6 used in a g code file, but it did add a new issue now when I boot mach4 the dialog is run when the screen comes up

It also runs if I am in the screen editor and then exit back to mach …

So still missing something haven’t had much time to play with today, but tomorrow I will do some more testing

I’m thinking is has something to do with this line now that I added the dighandle == nul check

? if ( mc.mcRegGetValueString(toolchangeReg) == "ShowTchangeDlg" and dlghandle == nil ) then

?

Thanks Gary

?

?

Sent from for Windows

?

From: Brian Barker
Sent: Wednesday, February 1, 2023 10:16 AM
To: [email protected]
Subject: Re: [MachCNC] wxlua frame

?

Hi Gary,

Your really really close! Here is what I did to make it so you can't have more than one dialog show at a time.

?

In your PLC script:

local inst = mc.mcGetInstance("M6 Toolchange Dialog")
if(toolchangeReg == nil )then
?? ?toolchangeReg = mc.mcRegGetHandle(inst,"gRegs0/ATC/ToolDialog")
end

? if ( mc.mcRegGetValueString(toolchangeReg) == "ShowTchangeDlg" and dlghandle == nil ) then

??? dlghandle = ToolChangeDia() -- Remember to pass back something from the dialog so we know it has been done

? elseif ( mc.mcRegGetValueString( toolchangeReg ) ~= "ShowTchangeDlg" ) then

??????? dlghandle = nil-- kill the dialog so the garbage collector can get it back

end

You need to use the dlghandle to see if you have a dialog or not.

?

Test rest of it seems fine. I like what your doing!

?

______________________________

?

Brian Barker

Engineering / Development

ArtSoft | Newfangled Solutions

Livermore Falls, Maine (USA)

Webpage: 

On 1/31/2023 7:00 PM, Gary wrote:

Hi Brian,

?

Below is the code I have running at this time it works form the MDI right loads the dialog when I run the m6 script and I can exit it fine..

?

But when I run it in the g code the dialog runs fine but I get two copies if the dialog on the screen it seems to still be running ok no error’s and I can close both dialogs out with no errors

I know the code looks like crap but I’m not a programmer but did get it to work in the g code with no errors so that’s a start for me.

Any suggestions as to why it runs fine called from the MDI, but then displays 2 dialog boxes when called from the g code file?.

?

Thanks Gary

?

----this is in the m6 macro

?

function m6()

?

local inst = mc.mcGetInstance("M6 Toolchange")

?

local tchangeReg = mc.mcRegGetHandle(inst,"gRegs0/ATC/ToolDialog")

local rc = mc.mcRegSetValueString(tchangeReg,"ShowTchangeDlg")

?

?

-- Code to wait for the dialog to end

while(mc.mcRegGetValueString(tchangeReg) == "ShowTchangeDlg") do

??? wx.wxMilliSleep(500)

-- May want to add some code here in the event someone presses stop or kills the program

end

mc.mcRegSetValueString(tchangeReg, "NoTchangeDig")

local ReturnValue = mc.mcRegGetValueString(tchangeReg)

?

end

?

?

---this is it the screen load script

?

------ Tool change Dialog ------------------------

function ToolChangeDia()

local wx = require("wx")

??????????????? --inst = mc.mcGetInstance()

??????????????? local tchangeReg = mc.mcRegGetHandle(inst,"gRegs0/ATC/ToolDialog")

???????????????

local function ManualEvent(event)

??? coroutine.wrap(function()

??????? -- code for button 1 event

??????????????????????????????? Manual()

??? end)()

end

?

local function ManualTouchEvent(event)

??? coroutine.wrap(function()

??????? -- code for button 2 event

??????????????????????????????? ManualTouch()

??? end)()

end

?

local function ManualProbeEvent(event)

??? coroutine.wrap(function()

??????? -- code for button 3 event

??????????????????????????????? ManualProbe()

??? end)()

end

?

local function AbortEvent(event, frame)

??? coroutine.wrap(function()

??? Abort()

??????????????? --mc.mcRegSetValueString(M6reg,"0")

??? frame:Destroy()

??????? -- code for button 4 event

??? end)()

end

?

local function main()

??? -- Create a new frame

??? local frame = wx.wxFrame(wx.NULL, wx.wxID_ANY, "My Frame",

??????????????????????????? wx.wxDefaultPosition, wx.wxSize(340, 400))

?

??? -- Create Text above each button

??? local text1 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Button:\nTool must be in the Tool Table and offset set Swap tool out then Press Manual",

??????????????????????????????? wx.wxPoint(20, 10), wx.wxSize(150, 100))

??? local text2 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Touch:\nSwap tool out then Jog Z down to part surface use a feeler gauge, then Press Manual Touch",

???????????????? ???????????????wx.wxPoint(20, 70), wx.wxSize(150, 100))

??? local text3 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Probe:\nSwap tool out then put your touch off plate on top of part, Z will move down to above part surface and probe part, After Pressing Manual Touch",

??????????????????????????????? wx.wxPoint(20, 150), wx.wxSize(150, 100))

??? local text4 = wx.wxStaticText(frame, wx.wxID_ANY, "Abort:\nPress abort only if you cannot do a tool swap it will exit and also will disable the machine stop all code from running",

??????????????????????????????? wx.wxPoint(20, 260), wx.wxSize(150, 100))

?

??? -- Create buttons

??? local Manual = wx.wxButton(frame, wx.wxID_ANY, "Manual",

??????????????????????????????? wx.wxPoint(200, 20), wx.wxSize(100, 30))

??? local ManualTouch = wx.wxButton(frame, wx.wxID_ANY, "Manual Touch",

??????????????????????????????? wx.wxPoint(200, 90), wx.wxSize(100, 30))

??? local ManualProbe = wx.wxButton(frame, wx.wxID_ANY, "Manual Probe",

??????????????????????????????? wx.wxPoint(200, 180), wx.wxSize(100, 30))

??? local Abort = wx.wxButton(frame, wx.wxID_ANY, "Abort",

??????????????????????????????? wx.wxPoint(200, 280), wx.wxSize(100, 30))

?

??? -- Connect button events

??? Manual:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, ManualEvent)

??? ManualTouch:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, ManualTouchEvent)

??? ManualProbe:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, ManualProbeEvent)

??? Abort:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, function(event) AbortEvent(event, frame) end)

?

-- Show the frame

frame:Show(true)

end

?

local co = coroutine.wrap(main)

co() -- start the coroutine

mc.mcRegSetValueString(tchangeReg, "NoTchangeDig")

function Manual()

--frame:Destroy()

wx.wxMessageBox("Manual")

end

?

function ManualTouch()

--frame:Destroy()

wx.wxMessageBox("Manual Touch off")

end

?

function ManualProbe()

--frame:Destroy()

wx.wxMessageBox("Manual Probe")

end

?

function Abort()

--frame:Destroy()

wx.wxMessageBox("Abort")

mc.mcRegSetValueString(tchangeReg, "NoTchangeDig")

end

--wx.wxGetApp():MainLoop()

mc.mcRegSetValueString(tchangeReg, "NoTchangeDig")

return nul

end

?

?

---this is in the PLC

?

----tool change dialog----

local inst = mc.mcGetInstance("M6 Toolchange Dialog")

toolchangeReg = mc.mcRegGetHandle(inst,"gRegs0/ATC/ToolDialog")

if ( mc.mcRegGetValueString(toolchangeReg) == "ShowTchangeDlg" ) then?? -- put the handle to the toolchange Osig in the global table

????toolchangeActiveReg = mc.mcSignalGetHandle(inst,mc.OSIG_TOOL_CHANGE)

end

--if ( toolchangeReg == nul ) then

--end

--else

? if ( mc.mcRegGetValueString(toolchangeReg) == "ShowTchangeDlg" and mc.mcSignalGetState( toolchangeActiveReg ) == 1 ) then

??? dlghandle = ToolChangeDia() -- Remember to pass back something from the dialog so we know it has been done

? elseif ( mc.mcRegGetValueString( toolchangeReg ) ~= "ShowTchangeDlg" ) then

????????dlghandle = nil-- kill the dialog so the garbage collector can get it back

? end

?

?

Sent from for Windows

?

From: Brian Barker
Sent: Monday, January 30, 2023 8:47 AM
To: [email protected]
Subject: Re: [MachCNC] wxlua frame

?

Hi Gary,

Sorry I was coaching robotics and had a comp this weekend so I was flat out :) The good news is that I had 2 more teems qualify for states! Okay back to work!?

?

We don't have any real library for semaphores, it's really telling you how you need to architect the system. Let me see if I can make something to show you how I would do it in a screen. But basically we don't allow graphics in the Macro's (Mostly because we didn't see the need and I think this is still the best). How you communicate to the macro's is through registers. The registers are the only way to have thread safe data in Lua to the rest of the system. Having graphics in the Mcodes could and would put the events into the macro's / Gcode thread and we REALLY don't want that! By communicating via registers it will allow you to have your dialog and not have the Gcode interpreter thread plugged up with graphics.

?

Now onto the solution!

?

You need to setup a register in the register conifig dialog:

Mine is at the following path "iRegs0/ToolSettings"

?

So in my M6 macro I would put the following:

local inst = mc.mcGetInstance("M6 Toolchange")
local tchangeReg = mc.mcRegGetHandle(inst,"iRegs0/ToolSettings")
local rc = mc.mcRegSetValue(tchangeReg,"ShowTchangeDlg")

-- Code to wait for the dialog to end
while(mc.mcRegGetValue(tchangeReg) == "ShowTchangeDlg") do
?? ?wx.wxMilliSleep(500)
?-- May want to add some code here in the event someone presses stop or kills the program
end
local ReturnValue = mc.mcRegGetValue(tchangeReg)

-- Continue with the toolchanger and you have the return in the register.

?

?

Now in the screen you can put your dialog in a function and check to see if you need to launch it in the PLC script :

local inst = mc.mcGetInstance("M6 Toolchange Dialog")
if(toolchangeActiveReg == nil)then -- put the handle to the toolchange Osig in the global table
?? ?toolchangeActiveReg = mc.mcSignalGetHandle(inst,mc.OSIG_TOOL_CHANGE)
end
if(tchangeDlogReg == nil)then
tchangeDlogReg = mc.mcRegGetHandle(inst,"iRegs0/ToolSettings")
end

if(mc.mcRegGetValue(tchangeReg) == "ShowTchangeDlg" and mc.mcSignalGetState(toolchangeActiveReg) == 1 && dlghandle == nil)then
?? ?
?? ?dlghandle = YourDialogFunction()-- Remember to pass back something from the dialog so we know it has been done
else
?? ?if(mc.mcRegGetValue(tchangeReg) ~= "ShowTchangeDlg" and? dlghandle ~= nil) then
?? ??? ?dlghandle = nil-- kill the dialog so the garbage collector can get it back
?? ?end
end

?

?

This is all untested and 100% can be changed but I think it clearly shows how I would do it :)

?

Hope that helps!

______________________________

?

Brian Barker

Engineering / Development

ArtSoft | Newfangled Solutions

Livermore Falls, Maine (USA)

Webpage: 

On 1/27/2023 9:38 AM, Gary wrote:

Ok thanks Brian,

?

I will try them out, by in the screen not sure what screen the frame? The screen load script ?

?

What my real goal was or is, I have a rotary tool changer, I am checking the m6 macro to see if the new tool is in the rack if not the switching to a manual tool change, the dialog was just a thought if the tool not in rack then give the option to manual tool change and continue is the tool is in the tool table an offset it set, or is tool not in the table and or offset not set then jog down and touch off top of part, or the option to use a touch off plate and probe it, leaving the choices up to me hence the frame and buttons..

?

I will most likely need help I am starting to go over my head now… I did try local semaphore = require("semaphore")

but doesn’t seem to be in the library…. And not sure if it was were the directory is located…

?

Thangs Gary

?

Sent from for Windows

?

From: Brian Barker
Sent: Friday, January 27, 2023 8:36 AM
To: [email protected]
Subject: Re: [MachCNC] wxlua frame

?

Hi Gary,

What you will need to do is put this code in the screen (where graphics are done). In your M6 set a register to a value that will trigger the dialog in the screen. You will need a spinlock checking to see when your dialog is done (set some other register stating that the Macro needs to continue) . We do have some other tools to hold a macro (mcFileHoldAquire) but it's a bit more advanced (This is the tool that allows the manual tool change to work) and what is also doing the the work for the mcCntlWaitOnCycleStart command. Try that out and tell me how it works for you. If you would like a hand doing it I am more than happy to assist you with the programming. I think this would be a cool router feature :)

?

thanks
Brian

?

______________________________

?

Brian Barker

Engineering / Development

ArtSoft | Newfangled Solutions

Livermore Falls, Maine (USA)

Webpage: 

On 1/26/2023 7:00 PM, Gary wrote:

----------------------------------------------------------
-- frame with 4 buttons inside a Coroutine module script
-- Runs from a button script
----------------------------------------------------------
inst = mc.mcGetInstance()
local path = mc.mcCntlGetMachDir(inst)
package.path = path .."\\Modules\\?.lua;"

??? --mach4ProbeMenu module
package.loaded.mach4ProbeMenu = nil
pb = require "mach4ProbeMenu"
?? ?
pb.M6Menu()



----------------------------------------------------------
-- frame with 4 buttons inside a Coroutine modual script
-- this goes into the modules folder
----------------------------------------------------------
------------------------------------------------------------------------------------
-- Module to be called with button script
-- So far i have not been able to get to run correct being called from a g code file
------------------------------------------------------------------------------------
local M6Control = {}

function M6Control.M6Menu()

local function button1Event(event)
??? coroutine.wrap(function()
??????? -- code for button 1 event
??? end)()
end

local function button2Event(event)
??? coroutine.wrap(function()
??????? -- code for button 2 event
??? end)()
end

local function button3Event(event)
??? coroutine.wrap(function()
??????? -- code for button 3 event
??? end)()
end

local function button4Event(event, frame)
??? coroutine.wrap(function()
??? Abort()
??? frame:Destroy()
??????? -- code for button 4 event
??? end)()
end

local function main()
??? -- Create a new frame
??? local frame = wx.wxFrame(wx.NULL, wx.wxID_ANY, "My Frame",
??????????????????????????? wx.wxDefaultPosition, wx.wxSize(340, 400))

??? -- Create Text above each button
??? local text1 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Button:\nTool must be in the Tool Table and offset set Swap tool out then Press Manual",
??????????????????????????????? wx.wxPoint(20, 10), wx.wxSize(150, 100))
??? local text2 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Touch:\nSwap tool out then Jog Z down to part surface use a feeler gauge, then Press Manual Touch",
??????????????????????????????? wx.wxPoint(20, 70), wx.wxSize(150, 100))
??? local text3 = wx.wxStaticText(frame, wx.wxID_ANY, "Manual Probe:\nSwap tool out then put your touch off plate on top of part, Z will move down to above part surface and probe part, After Pressing Manual Touch",
??????????????????????????????? wx.wxPoint(20, 150), wx.wxSize(150, 100))
??? local text4 = wx.wxStaticText(frame, wx.wxID_ANY, "Abort:\nPress abort only if you cannot do a tool swap it will exit and also will disable the machine stop all code from running",
??????????????????????????????? wx.wxPoint(20, 250), wx.wxSize(150, 100))

??? -- Create buttons
??? local button1 = wx.wxButton(frame, wx.wxID_ANY, "Manual",
??????????????????????????????? wx.wxPoint(200, 20), wx.wxSize(100, 30))
??? local button2 = wx.wxButton(frame, wx.wxID_ANY, "Manual Touch",
??????????????????????????????? wx.wxPoint(200, 90), wx.wxSize(100, 30))
??? local button3 = wx.wxButton(frame, wx.wxID_ANY, "Manual Probe",
??????????????????????????????? wx.wxPoint(200, 180), wx.wxSize(100, 30))
??? local button4 = wx.wxButton(frame, wx.wxID_ANY, "Abort",
??????????????????????????????? wx.wxPoint(200, 270), wx.wxSize(100, 30))

??? -- Connect button events
??? button1:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button1Event)
??? button2:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button2Event)
??? button3:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, button3Event)
??? button4:Connect(wx.wxEVT_COMMAND_BUTTON_CLICKED, function(event) button4Event(event, frame) end)

-- Show the frame
frame:Show(true)
end

local co = coroutine.wrap(main)
co() -- start the coroutine

function Abort()
--frame:Destroy()
wx.wxMessageBox("Abort")
end
wx.wxGetApp():MainLoop()
end

--M6Control.M6Menu()

return M6Control

here is an example of the code i have been trying, i wanted to call the frame when doing a tool change, based on checking some registers that may be set..
and only call the frame if need be...

Thanks gary

?

?

?