开云体育

Tom and other torchies,
I just finished my THC controller ( Tom Caudles design ), got it
installed and made a few trial cuts, WOW, is this thing cool. I cut
a small piece of 3/16" plate with about a 1/2" hump in the center and
you can watch the torch follow the contour with what seems to be a
very tight torch pattern. The boards went together and function just
like Tom said they would. I'll try running some bigger projects
tomorrow and report in with any findings.
Thanks again Tom
Todd

--- In mach1mach2cnc@..., "morgtod" <todmorg@h...> wrote:

Tom and other torchies,
I just finished my THC controller ( Tom Caudles design ), got it
installed and made a few trial cuts, WOW, is this thing cool. I

cut

a small piece of 3/16" plate with about a 1/2" hump in the center

and

you can watch the torch follow the contour with what seems to be a
very tight torch pattern. The boards went together and function

just

like Tom said they would. I'll try running some bigger projects
tomorrow and report in with any findings.
Thanks again Tom
Todd

Marvelous,,,simply marvelous!! For those of you not inclined to
dabble in rolling your own, the Sound Logic guy (Jim Cullins) is hot
on the trail of designing a finished unit.