strange jogging

spencer@spencerserolls.com #154948 If I set the Y jog increment to .01" i get a very strange motion. it lurches and jumps and apparently ends up ion the right place. the motion is definitely not normal, this sort of bizarre motion should never happen. it only happens in jogging from the jog screen, not from the xbox or MDI making the same move. If i change the increment in setup to .011" it is fine as well as every other increment. more strange is that screwing around with the increment changing it to .011" and then back to .01" it is not lurching now. also, is there a new version with the increment selection working after booting? i broke another cutter joggin 1 inch instead of .01? it was a cheap Chinese one so no big deal. BTW, the finish from a Whiteside or other quality bit is much better than the Chinese stuff. For a while i was getting very good Chinese router bits but it seems to be totally hit or miss. the company i was getting them from decided to make them on their own instead of buying from mfgs . I guess the next thing they need to add is quality control. I can not tell the difference between the good and the bad bits when new. Under the microscope they look pretty much the same. Anyway lesson learned (BUY US MADE TOOLING even if it costs twice as much) -- Best regards, Spencer Chase 67550 Bell Springs Rd. Garberville, CA 95542 Postal service only. Laytonville, CA 95454 UPS only. Spencer@... (425) 791-0309
spencer@spencerserolls.com #154949 i will probably change it to .011" but it would be good to know why this happens and how to fix it correctly. toggle quoted message Show quoted text On 6/14/2021 8:28 PM, spencer@... wrote: If I set the Y jog increment to .01" i get a very strange motion. it lurches and jumps and apparently ends up ion the right place. the motion is definitely not normal, this sort of bizarre motion should never happen. it only happens in jogging from the jog screen, not from the xbox or MDI making the same move. If i change the increment in setup to .011" it is fine as well as every other increment. more strange is that screwing around with the increment changing it to .011" and then back to .01" it is not lurching now. also, is there a new version with the increment selection working after booting? i broke another cutter joggin 1 inch instead of .01? it was a cheap Chinese one so no big deal. BTW, the finish from a Whiteside or other quality bit is much better than the Chinese stuff. For a while i was getting very good Chinese router bits but it seems to be totally hit or miss. the company i was getting them from decided to make them on their own instead of buying from mfgs . I guess the next thing they need to add is quality control. I can not tell the difference between the good and the bad bits when new. Under the microscope they look pretty much the same. Anyway lesson learned (BUY US MADE TOOLING even if it costs twice as much) -- Best regards, Spencer Chase 67550 Bell Springs Rd. Garberville, CA 95542 Postal service only. Laytonville, CA 95454 UPS only. Spencer@... (425) 791-0309

Previous Topic Next Topic

开云体育

strange jogging