Keyboard Shortcuts
Likes
Search
senior estop
开云体育i added some more protection to my router including having an overload on the spindle motor cause the axis motors to disable to prevent breaking a non moving cutter. carbide snaps off very nicely. however the biggest improvement is my senior citizen emergency necklace. i have several remote relays used in the shop for the compressor the vacuum and in the house for the piano bluetooth receiver and i have several that you can control from your cell phone. however for stopping the router that i hear from across the room might be doing bad things i wanted a single button and no confusion. i have the relay in series with the regular estop that connects to all motor circuits but leaves the ess and computer running.
-- Best regards, Spencer Chase 67550 Bell Springs Rd. Garberville, CA 95542 Postal service only. Laytonville, CA 95454 UPS only. Spencer@... (425) 791-0309 |
开云体育We can adjust the cv settings to make sure you have nice sharp corners. That is a function of the acceleration and the look ahead buffer depth. As for the Xbox controller I am sure we can make it work. When you have time I will have one of my support guys work with you. I would like to know what you have for issues so we can prevent them in the future.?He can hep you get the parts counter in and the cycle start button working. Thanks Brian? On Apr 4, 2021, at 5:21 PM, spencer@... wrote:
|
开云体育cycle start works and using b for the counter is just fine. no
need to waste time unless you think others would like a fancy
parts counter. my parts are in a sub that is run for 10000 times
or something so i use the G) B1 in the sub. would need this to be
an option with the parts counter but again i am really fine
without one. i think i could not get the plugin to work because i forgot it
had to be enabled. i did this with ESS because i read the manual a
page at a time and installed everything but when it came to the
xbox i forgot. i guess i remembered when installing it on the
house computer? i'm sure it will work fine now :) On 4/4/2021 4:24 PM, Brian Barker
wrote:
We can adjust the cv settings to make sure you have nice sharp corners. That is a function of the acceleration and the look ahead buffer depth. As for the Xbox controller I am sure we can make it work. When you have time I will have one of my support guys work with you. I would like to know what you have for issues so we can prevent them in the future.? -- Best regards, Spencer Chase 67550 Bell Springs Rd. Garberville, CA 95542 Postal service only. Laytonville, CA 95454 UPS only. Spencer@... (425) 791-0309 |
开云体育The parts counter is. In the machine now :) you also have a parts counter down ?counter! It is in the #vars I think off the top of my head it is #3901. You don’t have to program, just place a DRO on the screen and type in 3901 in the parameter var. we can make a quick little document to show you how. We have to d of functions we don’t put on the screens. As it is now people say we have to much... delete is way easier than adding controls for most. I didn’t think of it but we can export the controls for you and you can simply import them! Way simpler!?On Apr 4, 2021, at 8:08 PM, spencer@... wrote:
|