开云体育

On Wed, Mar 10, 2021 at 2:35 PM aim_4_the_x <roger@...> wrote:

I have a Thermal Dynamics Cutmaster A60 Purchased in 2012 but with very
few hours on it for sale. Single phase 220. This machine is intended for
use on a a CNC plasma table. It has a rear panel CNC control connector.
There is a machine mount and some consumables. It has a machine torch
only - no hand torch. I also have a CandCNC MP3000 Digital Torch Height
control to sell that works with the A60.

Located near Salinas, CA.

How much?

Hmm. $1750 for the A60 and 300 for the MP3000DTHC.


On 3/10/2021 12:45 PM, o1bigtenor wrote:

On Wed, Mar 10, 2021 at 2:35 PM aim_4_the_x <roger@...> wrote:

I have a Thermal Dynamics Cutmaster A60 Purchased in 2012 but with very
few hours on it for sale. Single phase 220. This machine is intended for
use on a a CNC plasma table. It has a rear panel CNC control connector.
There is a machine mount and some consumables. It has a machine torch
only - no hand torch. I also have a CandCNC MP3000 Digital Torch Height
control to sell that works with the A60.

Located near Salinas, CA.

How much?

I don't know if there are variations or if you are including a lot of consumables etc but my quick search suggests you can buy the cutter new for less than what you? are asking. i have been interested in buying a plasma for a while and even bought on on ebay that was cancelled because the seller was a bullshitter and never shipped it. I am probably lucky i didn't get that POS. anyway i am interested in a high quality plasma cutter and was hoping to find a used one but don't want to spend more than the new price for it.

On 3/10/2021 1:51 PM, aim_4_the_x wrote:

Hmm. $1750 for the A60 and 300 for the MP3000DTHC.


On 3/10/2021 12:45 PM, o1bigtenor wrote:

On Wed, Mar 10, 2021 at 2:35 PM aim_4_the_x <roger@...> wrote:

I have a Thermal Dynamics Cutmaster A60 Purchased in 2012 but with very
few hours on it for sale. Single phase 220. This machine is intended for
use on a a CNC plasma table. It has a rear panel CNC control connector.
There is a machine mount and some consumables. It has a machine torch
only - no hand torch. I also have a CandCNC MP3000 Digital Torch Height
control to sell that works with the A60.

Located near Salinas, CA.

How much?

I see the A40 for less but the A60 is more like $2500 when I look.

On 3/10/2021 2:11 PM, spencer@... wrote:

I don't know if there are variations or if you are including a lot of consumables etc but my quick search suggests you can buy the cutter new for less than what you? are asking. i have been interested in buying a plasma for a while and even bought on on ebay that was cancelled because the seller was a bullshitter and never shipped it. I am probably lucky i didn't get that POS. anyway i am interested in a high quality plasma cutter and was hoping to find a used one but don't want to spend more than the new price for it.

On 3/10/2021 1:51 PM, aim_4_the_x wrote:

Hmm. $1750 for the A60 and 300 for the MP3000DTHC.


On 3/10/2021 12:45 PM, o1bigtenor wrote:

On Wed, Mar 10, 2021 at 2:35 PM aim_4_the_x <roger@...> wrote:

I have a Thermal Dynamics Cutmaster A60 Purchased in 2012 but with very
few hours on it for sale. Single phase 220. This machine is intended for
use on a a CNC plasma table. It has a rear panel CNC control connector.
There is a machine mount and some consumables. It has a machine torch
only - no hand torch. I also have a CandCNC MP3000 Digital Torch Height
control to sell that works with the A60.

Located near Salinas, CA.

How much?

as i said i did a quick look. it seems that google showed a lot of hits that were not for the 60, had to look deeper to see the price range.

i don't think i need much, not sure what i am even going to do with it, i absolutely do not have room for a plasma cutting table.

what might be a good one to start with (are the low hundreds of dollars Chinese things worthless and if not which might better?)

On 3/10/2021 2:15 PM, aim_4_the_x wrote:

I see the A40 for less but the A60 is more like $2500 when I look.

On 3/10/2021 2:11 PM, spencer@... wrote:

I don't know if there are variations or if you are including a lot of consumables etc but my quick search suggests you can buy the cutter new for less than what you? are asking. i have been interested in buying a plasma for a while and even bought on on ebay that was cancelled because the seller was a bullshitter and never shipped it. I am probably lucky i didn't get that POS. anyway i am interested in a high quality plasma cutter and was hoping to find a used one but don't want to spend more than the new price for it.

On 3/10/2021 1:51 PM, aim_4_the_x wrote:

Hmm. $1750 for the A60 and 300 for the MP3000DTHC.


On 3/10/2021 12:45 PM, o1bigtenor wrote:

On Wed, Mar 10, 2021 at 2:35 PM aim_4_the_x <roger@...> wrote:

I have a Thermal Dynamics Cutmaster A60 Purchased in 2012 but with very
few hours on it for sale. Single phase 220. This machine is intended for
use on a a CNC plasma table. It has a rear panel CNC control connector.
There is a machine mount and some consumables. It has a machine torch
only - no hand torch. I also have a CandCNC MP3000 Digital Torch Height
control to sell that works with the A60.

Located near Salinas, CA.

How much?