|
Hello All. I’m new to using a CNC system and new to using the Mach4 software. I have a LMS3990 converted to CNC, but I think there are several things preventing my setup from working correctly. I have several questions that require more than posting within this User Group. Is there anyone in this groups that lives in the North Seattle / Everett Washington State area? ?I’m looking for someone that knows how to troubleshoot Mach4 Hobby Edition and how to make adjustment suggestions for a bench top mill.
Thanks, Walt W.
|
Walt, I live north of Everett and I am familiar with Mach3, haven’t installed Mach4 yet since Mach3 is working fine.?
I’ve also done some retrofitting to CNC
If you want to email me then I can give you my phone number and we can talk about what you’re looking for.?
Chuck?
toggle quoted message
Show quoted text
-sent from my iphone --
On Aug 2, 2022, at 11:53 AM, Walt White <w3Leon@...> wrote:
? Hello All. I’m new to using a CNC system and new to using the Mach4 software. I have a LMS3990 converted to CNC, but I think there are several things preventing my setup from working correctly. I have several questions that require more than posting within this User Group. Is there anyone in this groups that lives in the North Seattle / Everett Washington State area? ?I’m looking for someone that knows how to troubleshoot Mach4 Hobby Edition and how to make adjustment suggestions for a bench top mill.
Thanks, Walt W.
|
Chuck if you have issues with 4 Please make sure you contact us
so we can help you with how the settings differ from Mach3 to 4.
Thank you for assisting!
Brian
______________________________
Brian Barker
Engineering / Development
ArtSoft | Newfangled Solutions
Livermore Falls, Maine (USA)
Webpage:
On 8/2/2022 3:01 PM, Chuck Kahler
wrote:
toggle quoted message
Show quoted text
Walt,
I live north of Everett and I am familiar with Mach3, haven’t
installed Mach4 yet since Mach3 is working fine.?
I’ve also done some retrofitting to CNC
If you want to email me then I can give you my phone number
and we can talk about what you’re looking for.?
Chuck?
?
Hello All. I’m new to using a CNC
system and new to using the Mach4 software. I have a
LMS3990 converted to CNC, but I think there are several
things preventing my setup from working correctly. I
have several questions that require more than posting
within this User Group. Is there anyone in this groups
that lives in the North Seattle / Everett Washington
State area? ?I’m
looking for someone that knows how to troubleshoot Mach4
Hobby Edition and how to make adjustment suggestions for
a bench top mill.
Thanks, Walt W.
|
Hi Brian, I appreciate your reaching out to assist in switching to 4.?
I have three machines running 3 and everything is working well currently.?
A while back I was having an issue on one of my machines running 3 and decided to switch??to 4.?
I got??most of the parameters set up on 4 and then my issue went way on that machine and I never got around to finishing up putting 4 on it.?
based on all the good things I hear about 4, I would??really?like to get??it up and running but I can’t seem to find the time to do it.?
Regards, Chuck
toggle quoted message
Show quoted text
-sent from my iphone --
On Aug 2, 2022, at 12:37 PM, Brian Barker <brianb@...> wrote:
?
Chuck if you have issues with 4 Please make sure you contact us
so we can help you with how the settings differ from Mach3 to 4.
Thank you for assisting!
Brian
______________________________
Brian Barker
Engineering / Development
ArtSoft | Newfangled Solutions
Livermore Falls, Maine (USA)
Webpage:
On 8/2/2022 3:01 PM, Chuck Kahler
wrote:
Walt,
I live north of Everett and I am familiar with Mach3, haven’t
installed Mach4 yet since Mach3 is working fine.?
I’ve also done some retrofitting to CNC
If you want to email me then I can give you my phone number
and we can talk about what you’re looking for.?
Chuck?
?
Hello All. I’m new to using a CNC
system and new to using the Mach4 software. I have a
LMS3990 converted to CNC, but I think there are several
things preventing my setup from working correctly. I
have several questions that require more than posting
within this User Group. Is there anyone in this groups
that lives in the North Seattle / Everett Washington
State area? ?I’m
looking for someone that knows how to troubleshoot Mach4
Hobby Edition and how to make adjustment suggestions for
a bench top mill.
Thanks, Walt W.
|
I want you to enjoy all the work we have put in :) We have some
really cool features coming out in this next release. The
Diagnostics tool is really fun to use graphing data from the core
of mach4 and anything else you may want to test.
______________________________
Brian Barker
Engineering / Development
ArtSoft | Newfangled Solutions
Livermore Falls, Maine (USA)
Webpage:
On 8/3/2022 1:47 AM, Chuck Kahler
wrote:
toggle quoted message
Show quoted text
Hi Brian,
I appreciate your reaching out to assist in
switching to 4.?
I have three machines running 3 and everything is
working well currently.?
A while back I was having an issue on one of my
machines running 3 and decided to switch??to 4.?
I got??most
of the parameters set up on 4 and then my issue went way on
that machine and I never got around to finishing up putting 4
on it.?
based on all the good things I hear about 4, I
would??really?like
to get??it up and
running but I can’t seem to find the time to do it.?
Regards,
Chuck
On Aug 2, 2022, at 12:37 PM, Brian
Barker <brianb@...> wrote:
?
Chuck if you have issues with 4 Please make sure you
contact us so we can help you with how the settings differ
from Mach3 to 4.
Thank you for assisting!
Brian
______________________________
Brian Barker
Engineering / Development
ArtSoft | Newfangled Solutions
Livermore Falls, Maine (USA)
Webpage:
On 8/2/2022 3:01 PM, Chuck Kahler
wrote:
Walt,
I live north of Everett and I am familiar with Mach3,
haven’t installed Mach4 yet since Mach3 is working fine.?
I’ve also done some retrofitting to CNC
If you want to email me then I can give you my phone
number and we can talk about what you’re looking for.?
Chuck?
?
Hello All. I’m new to using a CNC
system and new to using the Mach4 software. I have
a LMS3990 converted to CNC, but I think there are
several things preventing my setup from working
correctly. I have several questions that require
more than posting within this User Group. Is there
anyone in this groups that lives in the North
Seattle / Everett Washington State area? ?I’m looking
for someone that knows how to troubleshoot Mach4
Hobby Edition and how to make adjustment
suggestions for a bench top mill.
Thanks, Walt W.
|
Brian, Are there any new “wizards“, guidelines or whatever for converting from 3 to 4?
I believe it was in 2019 when I started to configure 4 and then set it aside.?
Regards, Chuck
toggle quoted message
Show quoted text
-sent from my iphone --
On Aug 3, 2022, at 7:00 AM, Brian Barker <brianb@...> wrote:
?
I want you to enjoy all the work we have put in :) We have some
really cool features coming out in this next release. The
Diagnostics tool is really fun to use graphing data from the core
of mach4 and anything else you may want to test.
______________________________
Brian Barker
Engineering / Development
ArtSoft | Newfangled Solutions
Livermore Falls, Maine (USA)
Webpage:
On 8/3/2022 1:47 AM, Chuck Kahler
wrote:
Hi Brian,
I appreciate your reaching out to assist in
switching to 4.?
I have three machines running 3 and everything is
working well currently.?
A while back I was having an issue on one of my
machines running 3 and decided to switch??to 4.?
I got??most
of the parameters set up on 4 and then my issue went way on
that machine and I never got around to finishing up putting 4
on it.?
based on all the good things I hear about 4, I
would??really?like
to get??it up and
running but I can’t seem to find the time to do it.?
Regards,
Chuck
On Aug 2, 2022, at 12:37 PM, Brian
Barker <brianb@...> wrote:
?
Chuck if you have issues with 4 Please make sure you
contact us so we can help you with how the settings differ
from Mach3 to 4.
Thank you for assisting!
Brian
______________________________
Brian Barker
Engineering / Development
ArtSoft | Newfangled Solutions
Livermore Falls, Maine (USA)
Webpage:
On 8/2/2022 3:01 PM, Chuck Kahler
wrote:
Walt,
I live north of Everett and I am familiar with Mach3,
haven’t installed Mach4 yet since Mach3 is working fine.?
I’ve also done some retrofitting to CNC
If you want to email me then I can give you my phone
number and we can talk about what you’re looking for.?
Chuck?
?
Hello All. I’m new to using a CNC
system and new to using the Mach4 software. I have
a LMS3990 converted to CNC, but I think there are
several things preventing my setup from working
correctly. I have several questions that require
more than posting within this User Group. Is there
anyone in this groups that lives in the North
Seattle / Everett Washington State area? ?I’m looking
for someone that knows how to troubleshoot Mach4
Hobby Edition and how to make adjustment
suggestions for a bench top mill.
Thanks, Walt W.
|
Funny we had talked about working on the tools to do that today.
We have an XML converter tool but it will not setup the motion
controller .
We have a spreadsheet that we use to put all the data into and a
tool to read the XML's.
I can have you work with one of the guys if you like that use the
tools everyday.
Thanks
Brian
______________________________
Brian Barker
Engineering / Development
ArtSoft | Newfangled Solutions
Livermore Falls, Maine (USA)
Webpage:
On 8/3/2022 11:55 AM, Chuck Kahler
wrote:
toggle quoted message
Show quoted text
Brian,
Are there any new “wizards“, guidelines or whatever for
converting from 3 to 4?
I believe it was in 2019 when I started to configure 4 and
then set it aside.?
Regards,
Chuck
On Aug 3, 2022, at 7:00 AM, Brian
Barker <brianb@...> wrote:
?
I want you to enjoy all the work we have put in :) We
have some really cool features coming out in this next
release. The Diagnostics tool is really fun to use
graphing data from the core of mach4 and anything else you
may want to test.
______________________________
Brian Barker
Engineering / Development
ArtSoft | Newfangled Solutions
Livermore Falls, Maine (USA)
Webpage:
On 8/3/2022 1:47 AM, Chuck
Kahler wrote:
Hi Brian,
I appreciate your reaching out to assist in
switching to 4.?
I have three machines running 3 and
everything is working well currently.?
A while back I was having an issue on one
of my machines running 3 and decided to switch??to 4.?
I got??most
of the parameters set up on 4 and then my issue went
way on that machine and I never got around to
finishing up putting 4 on it.?
based on all the good things I hear about
4, I would??really?like
to get??it
up and running but I can’t seem to find the time to do
it.?
Regards,
Chuck
On Aug 2, 2022, at 12:37 PM,
Brian Barker <brianb@...>
wrote:
?
Chuck if you have issues with 4 Please make sure
you contact us so we can help you with how the
settings differ from Mach3 to 4.
Thank you for assisting!
Brian
______________________________
Brian Barker
Engineering / Development
ArtSoft | Newfangled Solutions
Livermore Falls, Maine (USA)
Webpage:
On 8/2/2022 3:01 PM,
Chuck Kahler wrote:
Walt,
I live north of Everett and I am familiar with
Mach3, haven’t installed Mach4 yet since Mach3 is
working fine.?
I’ve also done some retrofitting to CNC
If you want to email me then I can give you my
phone number and we can talk about what you’re
looking for.?
Chuck?
?
Hello
All. I’m new to using a CNC system and new
to using the Mach4 software. I have a
LMS3990 converted to CNC, but I think
there are several things preventing my
setup from working correctly. I have
several questions that require more than
posting within this User Group. Is there
anyone in this groups that lives in the
North Seattle / Everett Washington State
area? ?I’m
looking for someone that knows how to
troubleshoot Mach4 Hobby Edition and how
to make adjustment suggestions for a bench
top mill.
Thanks, Walt W.
|
Thank you, that sounds great.?
After three years I will need to do some refreshing before I get back into the set up. ? I will contact you after I get back in town and I ?take a look at what I ? currently have completed ?with the set up.?
Thanks again, Chuck
toggle quoted message
Show quoted text
-sent from my iphone --
On Aug 3, 2022, at 11:12 AM, Brian Barker <brianb@...> wrote:
?
Funny we had talked about working on the tools to do that today.
We have an XML converter tool but it will not setup the motion
controller .
We have a spreadsheet that we use to put all the data into and a
tool to read the XML's.
I can have you work with one of the guys if you like that use the
tools everyday.
Thanks
Brian
______________________________
Brian Barker
Engineering / Development
ArtSoft | Newfangled Solutions
Livermore Falls, Maine (USA)
Webpage:
On 8/3/2022 11:55 AM, Chuck Kahler
wrote:
Brian,
Are there any new “wizards“, guidelines or whatever for
converting from 3 to 4?
I believe it was in 2019 when I started to configure 4 and
then set it aside.?
Regards,
Chuck
On Aug 3, 2022, at 7:00 AM, Brian
Barker <brianb@...> wrote:
?
I want you to enjoy all the work we have put in :) We
have some really cool features coming out in this next
release. The Diagnostics tool is really fun to use
graphing data from the core of mach4 and anything else you
may want to test.
______________________________
Brian Barker
Engineering / Development
ArtSoft | Newfangled Solutions
Livermore Falls, Maine (USA)
Webpage:
On 8/3/2022 1:47 AM, Chuck
Kahler wrote:
Hi Brian,
I appreciate your reaching out to assist in
switching to 4.?
I have three machines running 3 and
everything is working well currently.?
A while back I was having an issue on one
of my machines running 3 and decided to switch??to 4.?
I got??most
of the parameters set up on 4 and then my issue went
way on that machine and I never got around to
finishing up putting 4 on it.?
based on all the good things I hear about
4, I would??really?like
to get??it
up and running but I can’t seem to find the time to do
it.?
Regards,
Chuck
On Aug 2, 2022, at 12:37 PM,
Brian Barker <brianb@...>
wrote:
?
Chuck if you have issues with 4 Please make sure
you contact us so we can help you with how the
settings differ from Mach3 to 4.
Thank you for assisting!
Brian
______________________________
Brian Barker
Engineering / Development
ArtSoft | Newfangled Solutions
Livermore Falls, Maine (USA)
Webpage:
On 8/2/2022 3:01 PM,
Chuck Kahler wrote:
Walt,
I live north of Everett and I am familiar with
Mach3, haven’t installed Mach4 yet since Mach3 is
working fine.?
I’ve also done some retrofitting to CNC
If you want to email me then I can give you my
phone number and we can talk about what you’re
looking for.?
Chuck?
?
Hello
All. I’m new to using a CNC system and new
to using the Mach4 software. I have a
LMS3990 converted to CNC, but I think
there are several things preventing my
setup from working correctly. I have
several questions that require more than
posting within this User Group. Is there
anyone in this groups that lives in the
North Seattle / Everett Washington State
area? ?I’m
looking for someone that knows how to
troubleshoot Mach4 Hobby Edition and how
to make adjustment suggestions for a bench
top mill.
Thanks, Walt W.
|
