开云体育

I recently bought a Mach 1 lic. and have been trying to run my
Master 5 code with Mach 1. I was happy with the parts I made with
Master 5. When I import the files to Mach 1 I get a series of errors
reported and the tool path display is not the same as master 5. Is
there some trick to using these files with Mach 1? I thought that
they would use the same files. I have tried using the Mach 1 DXF
import and many of the same errors appear as when I import the
Master 5 code files. I work in Acad 2004 and save in version 12 dxf
format.

Thank you for any help you can give me.

Roger

Roger:

If the errors your getting are "Radius not equal" or similar, then its
probably just the IJ mode. This can be toggled on the config/state screen in
Mach2.
Mach2 will run anything Master5 will, but it is more complex to set up
initially. Let me know the exact errors , or send me a troublesome file, and
I'll let you know how to proceed.

Thanks, Sorry for the trouble.
Art
www.artofcnc.ca