开云体育

You got a whole Russian novel on one line.
Break it up into smaller logical chunks.
Especially the dwell

dg






Message: 21
Date: Sat, 23 Aug 2003 23:11:08 -0000
From: "Lee Studley" <indigo_red@...>
Subject: N106G0G90G54X0.Y2.7969A0.S5000M93G4P2

Hi Art,
I finally got around to loading up Mach2 and I've been having
problems. Mach1 runs fine( with its caveats)
This code is from a standard FANUC postprocessor. This is a portion
of a file that runs fine in Mach1. In Mach2 it chokes with opening
the file during the"regen.. path"
message dialog on this line: N106G0G90G54X0.Y2.7969A0.S5000M93G4P2

Also once limits have been tripped, I used to be able to reset and
move the machine off the limit switch. I cant find how to do that now
in Mach2. Is there an override. I just read thers and overide button,
now I 'm looking for it :0)

Also, I've tried both drivers and the machine has dumped Mach2 out
twice. Going back to the original driver. I get the WinXP message
"blahblah MAch2 has done something evil and do you want to send a
report to MS blah blah."

-Lee

Why, oh why, does everybody seem to think "Fanuc" is a standard?

Because there are so many of them. Over half the world market at one point.
And because they are so versatile, they can be married to
so many different types and brands of machines.

Despite the variations, they are very consistent in how they
program and operate. Once you learn one, they are all
easy to understand.

Yes I agree now. Its what the CAM program generated. I'm dissecting it
and playing around with it. I dont get the G0 with no parms. I'm not
a GCODE expert,but I will be soon:-), I was hoping the CAM output was
ready to go as is. This is a good example to learn the details and
wonder why did it generate that...
-Lee

--- In mach1mach2cnc@..., "David Gabrielsen"
<cimdave@f...> wrote:

You got a whole Russian novel on one line.
Break it up into smaller logical chunks.
Especially the dwell

dg






Message: 21
Date: Sat, 23 Aug 2003 23:11:08 -0000
From: "Lee Studley" <indigo_red@q...>
Subject: N106G0G90G54X0.Y2.7969A0.S5000M93G4P2

Hi Art,
I finally got around to loading up Mach2 and I've been having
problems. Mach1 runs fine( with its caveats)
This code is from a standard FANUC postprocessor. This is a portion
of a file that runs fine in Mach1. In Mach2 it chokes with opening
the file during the"regen.. path"
message dialog on this line: N106G0G90G54X0.Y2.7969A0.S5000M93G4P2

Also once limits have been tripped, I used to be able to reset and
move the machine off the limit switch. I cant find how to do that

now

in Mach2. Is there an override. I just read thers and overide

button,

now I 'm looking for it :0)

Also, I've tried both drivers and the machine has dumped Mach2 out
twice. Going back to the original driver. I get the WinXP message
"blahblah MAch2 has done something evil and do you want to send a
report to MS blah blah."

-Lee