I'm almost finished 3d Printing the parts for this free project that I found on Design and Make's website.? I started printing 10 days ago, and should be
finished by next Sunday or sooner, so the next fun part is assembly...

Here is a link for the free project.??


It uses grbl for its simple controller, but since I'm buying stepper motors, why can't I create a Mach 3 profile for Vectric sotfware to use for modeling?

There has to be some kind of You Tube video for programming? Mach 3 for KISS level projects for beginners?

Thanks,

Tamra

开云体育

I think we are telling Mach 3, what the stepper motors capabilities are limited to, and I also want to limit my x,y,z axis.

Am I on the right path?

Thanks,

Tamra

I made an inquiry on the vectric forum and have not received a response.... fwiw...

Tamra

There is nothing controlling the Dremmel ON/OFF or spindle speed.
Your steps motors are driven with a controller which reads if not standard G-Code a similar language to move the XYZ axis by increment in inches or millimeters.
You may have to remove the header and footer information of the generated G-Code program from Aspire to make it compatible for the controller.

Usually CAD/CAM Software comes with a perfect tuned up postprocessors fully compatible with the CNC.
This is what I got from Gravotech and their 3D Artistic software, TYPE EDIT: ?