开云体育

Hi Art,

Is it possible to combine the spindle step/dir axis with the rotary A-axis?

The reason is that I'm thinking of using a servo motor as the spindle drive,
but occasionally use it as an axis for threading.

Will it work if I use the same output pins for both axis?

Thanks,

Peter Homann
mailto:Peter.Homann@...
Adacel Technologies Limited,
250 Bay St, BRIGHTON, 3186, AUSTRALIA
<>
Telephone +61 (3) 8530 7777, Facsimile +61 (3) 9596 2960
Mobile 0421-601 667