mach 4 limit switch oddity

[email protected] #154975 I am pretty sure it used to work before. If I hit a limit switch I could jog off it. Suddenly (after some strange behavior not moving the a axis and almost breaking an expensive bit) I could no longer do this. At one point I got an error something like can't jog onto limit switch? I am virtually certain I could do it before and I have not changed any settings nor can I find any to change. I have to disable the motor and manually turn the motor to get it off the switch and then it is fine but I really want to be able to jog off switches the normal way. Is there a setting that might have changed itself that I can restore? -- Best regards, Spencer Chase 67550 Bell Springs Rd. Garberville, CA 95542 Postal service only. Laytonville, CA 95454 UPS only. Spencer@... (425) 791-0309
[email protected] #154976 issue resolved itself without my doing anything. would like to know what might have screwed it up to begin with so i know what to do if it happens again. and i am not imagining this i tried over and over and voer and then it fixed itself? toggle quoted message Show quoted text On 8/26/2021 10:48 AM, spencer@... wrote: I am pretty sure it used to work before. If I hit a limit switch I could jog off it. Suddenly (after some strange behavior not moving the a axis and almost breaking an expensive bit) I could no longer do this. At one point I got an error something like can't jog onto limit switch? I am virtually certain I could do it before and I have not changed any settings nor can I find any to change. I have to disable the motor and manually turn the motor to get it off the switch and then it is fine but I really want to be able to jog off switches the normal way. Is there a setting that might have changed itself that I can restore? -- Best regards, Spencer Chase 67550 Bell Springs Rd. Garberville, CA 95542 Postal service only. Laytonville, CA 95454 UPS only. Spencer@... (425) 791-0309

Previous Topic Next Topic

开云体育

mach 4 limit switch oddity