Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
Win7 reboots when Parallel port is selected.
|
?I ran into the subject problem and did a search on Google and a solution came up?
I tried it and it solved the problem. The only issue I had with the fix was that you have to run the fix as the administrator and at first that was a problem but eventually figured out that to run a cmd line as the administration I had to press Cntrl+Shift plus enter. The I copied and pasted the fixes as decribed and it now mach3 no longer reboots when from the optional devices I select the Parallel Port. Dan Mauch |
|
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> on behalf of Dan Mauch <dmauch@...>
Sent: Tuesday, November 26, 2019 11:31:20 AM To: [email protected] <[email protected]> Subject: [MachCNC] Win7 reboots when Parallel port is selected. ?
?I ran into the subject problem and did a search on Google and a solution came up?
I tried it and it solved the problem. The only issue I had with the fix was that you have to run the fix as the administrator and at first that was a problem but eventually figured out that to run a cmd line as the administration I had to press Cntrl+Shift plus enter. The I copied and pasted the fixes as decribed and it now mach3 no longer reboots when from the optional devices I select the Parallel Port. Dan Mauch |
to navigate to use esc to dismiss