Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
Digitizing probe
|
Greg Nuspel
You should be able to invert the signal if needed electronically or
toggle quoted message
Show quoted text
electro-mechanically (relay) Greg ----- Original Message -----
From: "rrc62_03782" <rrc62@...> To: <mach1mach2cnc@...> Sent: Sunday, February 29, 2004 6:12 PM Subject: [mach1mach2cnc] Digitizing probe Art...Someone posted an interesting probe switch on another board but it is a normallyclosed switch. |
|
Art
Hi Ross:
toggle quoted message
Show quoted text
No matter, NO or NC, you just change the active low setting on the digitize input.. Thanks, Art www.artofcnc.ca ----- Original Message -----
From: "rrc62_03782" <rrc62@...> To: <mach1mach2cnc@...> Sent: Sunday, February 29, 2004 9:12 PM Subject: [mach1mach2cnc] Digitizing probe Art...Someone posted an interesting probe switch on another board but it is a normallyclosed switch. |
|
With Mach2 just either check or un-check it should take it either way.
toggle quoted message
Show quoted text
Jim ----- Original Message -----
From: "Greg Nuspel" <nuspel@...> To: <mach1mach2cnc@...> Sent: Sunday, February 29, 2004 8:05 PM Subject: Re: [mach1mach2cnc] Digitizing probe You should be able to invert the signal if needed electronically or |
to navigate to use esc to dismiss