MachCNC

Re: Mach3 pwm Spindel analog Output csmio

xpylonracer@... (Emgee Radian) — Fri, 04 Apr 2025 11:26:37 -0700

Hi Sven

Are you controlling an ac motor via VFD or a DC motor from a controller ?

search in the top search box for message #146142

read replies from Peter Homann regarding supply of the 10v.

Peter is highly rated for his expertise so take his advice seriously.

Marcus

Re: Mach3 pwm Spindel analog Output csmio

edwalsh63@... (JOSEPH WALSH) — Thu, 03 Apr 2025 08:42:12 -0700

Hello my name is Ed and I have a small cnc router and it was working fine and then I broke some pins and ordered a new control box and every since then it doesn't work right.
I live in Troy Mo. and would gladly pay someone to help me get it going again. Thanks I think it's a mogul. 636-358-1088

On Thursday, April 3, 2025 at 09:53:06 AM CDT, s.treese via groups.io <s.treese@...> wrote:

Hey all
Does anyone here use a csmio-ip-s or similar controller under mach3 ?
How do I configure the 0-10v pwm signal on analogue out ?
Configuring a porentionmeter(analogue in) was no problem
But I do not get an output signal
Greetings Sven

Mach3 pwm Spindel analog Output csmio

s.treese@... — Thu, 03 Apr 2025 07:53:00 -0700

Re: Mach 3 Mill, Exact stop

sdmonaco@... (sdmonaco) — Fri, 10 Jan 2025 12:56:58 -0800

Stopping after each g-code line is what mach-3 does when it is in single step mode. Check your setup and config file to make sure this is not the case.

Re: Mach 3 Mill, Exact stop

gknox@... (Graham) — Thu, 09 Jan 2025 09:09:53 -0800

Code block, I mean each individual instruction. No its not mechanical, I have a hand controller and motion is smooth and and calibration is very good.

I thought originally it was a PC issue, then replace the box, motion under code is just the same.

Ideas???

Regards

Graham

Re: Mach 3 Mill, Exact stop

sdmonaco@... (sdmonaco) — Tue, 07 Jan 2025 09:20:40 -0800

Hi Graham, not sure what you mean by each code block. One thing you might check is to see if the machine is slipping steps due to binding or excessive friction. Sam

Re: Mach 3 Mill, Exact stop

martin.at.leasingham@... (Martin Connelly) — Tue, 07 Jan 2025 00:40:01 -0800

My thoughts as well. Alt-N or the button on the tool path screen will toggle it. When it is on the yellow LED above the button will flash.

Re: Mach 3 Mill, Exact stop

ozwes007@... (Wesley Wilcox) — Tue, 07 Jan 2025 00:32:08 -0800

Haven’t got single block mode turned on?

Mach 3 Mill, Exact stop

gknox@... (Graham) — Mon, 06 Jan 2025 15:09:20 -0800

I have re commissioned my 3 axis mill, All goes well, Except!!!

The machine stops at each code block. Appears if smoothing, forward looking is not working. I have changed the CV Control settings, made no difference. Selected Constant Velocity/Exact Stop. Bought a new computer , thinking the older one was not up to the task. Made no difference.

Can you offer any ideas??

Regards

Graham

Updated photo album Fraser CNC

@... — Mon, 09 Dec 2024 21:51:20 -0800

fraserneville@... updated the photo album Fraser CNC : Some views of my 3D printed machine. The controller is an Arduino using the V3 controller board and my old drivers. Bed area is about 400 X 600mm Z is about 80mm

Re: Leaving MachCNC behind me.

fraserneville@... — Mon, 09 Dec 2024 21:49:44 -0800

I've just added a folder with 5 pics.

cheers

Added photo album Fraser CNC

@... — Mon, 09 Dec 2024 21:31:00 -0800

fraserneville@... added the photo album Fraser CNC : general view of my #D printed machine.

Re: Leaving MachCNC behind me.

animal@... (mike allen) — Mon, 09 Dec 2024 13:00:47 -0800

ANy pic's of yer new setup ?

thanks

animal

On 12/9/24 12:42 PM, fraserneville via groups.io wrote:

Leaving MachCNC behind me.

fraserneville@... — Mon, 09 Dec 2024 12:42:42 -0800

Hi all.

Firstly, thanks to all those whose advice helped me all those years ago setting up my first CNC machine.

Two disasters impacted my early use- my laptop with a parallel port got stolen and the insurance wouldn't replace it with a similar item.

I solved this by building a desktop using a core board that included parallel. Unfortunately, a mouse plague meant that the innards of this got eaten and wrecked.

When researching a replacement, I found that for my needs at least it was cheaper and easier to use Open-Source, USB oriented software now.

I had dismantled my original CNC and rebuilt it with one using 3D printed parts. This one is bigger and more accurate.

Anyway, thanks again to the community and good times with your CNC-ing!

Cheers,

Neville

Re: script brain

perso.gilles@... — Thu, 26 Sep 2024 09:55:43 -0700

Hello everyone

I'm struggling with my brain, but I've made progress. My relay works as I want, but I'm stuck on the lighting of the led linked to the relay.
This led has the code OEMled=1011 and I would like it to light up steadily
Thanks in advance for your help
++ Gilles

Re: script brain

perso.gilles@... — Thu, 19 Sep 2024 21:18:05 -0700

hello
thanks for the macro example
i will read this carefully and i will not fail to come back to you
as my english is mediocre i will tie myself in knots
++
gilles

Re: script brain

perso.gilles@... — Thu, 19 Sep 2024 21:15:13 -0700

On Wed, Sep 18, 2024 at 04:14 AM, Stephen Muscato wrote:

hello everyone
in the meantime, I racked my brain :o) and I managed to make my relay work
I just renamed the OEM code of a led
on the "Ports and Pins" side I understood their usefulness to do external actions
thanks for the info
++
gilles

Re: script brain

babcockmill@... (Ross Babcock) — Wed, 18 Sep 2024 06:30:21 -0700

I have various macros and have attached a pdf of them that may help you sort it out. You will need to get the Input and output numbers from the mach3 manual.

Re: script brain

elko_dude@... (Stephen Muscato) — Tue, 17 Sep 2024 17:14:04 -0700

I wrote a script many years ago and don't remember much.

Have you tried "Ports & Pins" you can select outputs there.

Could you describe in more detail what you are trying to do? I understand activate a relay, but "when a led is on" I don't understand.

Steve

On Monday, September 16, 2024 at 06:51:42 AM CDT, perso.gilles via groups.io <perso.gilles@...> wrote:

hi
i'm starting the brain script and i'm stuck on how to activate a relay when a led is on
a helping hand please
++

script brain

perso.gilles@... — Mon, 16 Sep 2024 04:51:37 -0700

hi
i'm starting the brain script and i'm stuck on how to activate a relay when a led is on
a helping hand please
++