--- In mach1mach2cnc@..., "ozzie34231" <Ozzie@c...>
wrote:
For those wondering what the tool toucher is, it's just a piece
of
ground 10mm stock
<snip>
Steve Blackmore
I've good success using a small adjustable parallel bar between
the
work and the tool. Get within about 3/8", adjust, measure, and set
machine dro.
Jerry
Yep! me too. Mach2Mill manual Fig 7.10 shows technique in Mill
context. Corrections screen is handy for adding in the gage
thickness.
John Prentice
