I have downloaded different versions of mach2 and they all have
different response. Load mac2 c-2 and I can generate g code from
dfx file and get a tool path but the dro's dont work, down load mach2
1.0 and the dro's work and generates g code but no tool path
It seems that feed rate has something to do with not getting
tool path as If I edit lines pertaining to feed rate
I can get a tool path but it does not run properly. I can generate
a g code using a different program with the same dfx file then
export it to mach2 1.0 and I get a tool path and it almost runs
properly but not quite. I generate my dfx files from corel 9.
I would like to convert my dfx file with mach2, push a button and
tell my plasma cutter to cut, is this going to be possible. Do I
have bad downloads, am I downloading the wrong trial version,are
there some settings to be made, What do I do. Also would like to
know how to set dwell time or pause rate for plasma cutter. Thought
I could use dwell time for spindle as it is set up nice but looks as
though the spindle does not turn on and off for each cut.
