开云体育

OK? This the loss between the ports..? so power on? (? Not in TX ) From ANT connection to the SDR? it has 2 db of loss? should have? 0 DB? or no loss ( shorted ) From ANT connection to the

Please forgive my ignorance, can you explain what this is?

ANY ONE???? Skip

MFJ Antenna Tuners, HF Antenna, Speaker, and more For Sale: . MFJ-962 High Power HF Antenna Tuner: The MFJ-962 HF antenna tuner will handle full legal power with ease. It even says 1.5

All, This does not seem right.. Powered on ANT to XCVR=? -50DBM to -35 DBM? ( 2 Mhz,30Mhz) ANT to SDR= -2dbm across frequencies 2-30 Mhz Power on in TX Ant to XCVR=? 0DBM Ant to SDR=?? > -60

I ordered the 4602 entry panel from them, but I ordered it with N connectors instead of PL style, and there was no extra charge. PL-259 fittings are junk in my opinion, and are best used for audio

Thank you for all that replied with answers. I just received the MPD female connecter I ordered. Hopefully it will warmup a little in the next week or so, It shouldn’t take more than 10

I changed some. No problem loosen the nut and out it comes you don't need to mess with the panel. The problem is that a standard N barrel isn't long enough to seat a male on both sides you need a

I have an older MFJ-4601, I would like to change one of the SO-239 to a “N” type connector. I was wondering how hard is this going to be? Are the panels glued to the board? I don’t want to

Heard of a mod to short together the Ant and Xcvr ports together? so transceiver can also RX while in RX mode...? any one know of this? Skip? WB4YO

There is a scammer site that's been reported to the FTC. From MFJ's site: "There is a SCAM website currently advertising as MFJ. Please be aware that this site is not MFJ Enterprises, Inc. We have

James . . . What is displayed for the SWR, forward, and reflected power on the tuner? What does the power output of the radio and on the display show (you would have to press the LCD Mode switch to

Hi I am using an Icom 7300 with my MFJ 993B Intellituner with the MFJ interface cable. I notice today that the tuner would not tune up 10MHZ. I normally tune at 20 watts power. But then again if the

I recently made some repair work on my MFJ-993BRT tuner. Unfortunately I forgotten to check the followig: 1. Can the switch board (atop the main pcb) be easily removed? 2. IMO the tuner should work

Thanks Jeff eBay is high risk to get fake… Unfortunately Mouser has out of stock. So RF Microwave only to get them… 73 - Petr. OK1RP

Mouser https://www.mouser.com/ProductDetail/Broadcom-Avago/HSMS-2820-BLKG?qs=RQ9zk%252B50r5EQ9ZE26pWRFQ%3D%3D RF

Hi all any hint where to buy genuine schottky diodes surface mount 2820s for MFJ please? Petr, OK1RP

There is a nice rectifier on the external power input that should/might protect the rest of the meter. Bob N5TX

This might help: https://elektrotanya.com/mfj_259b_antenna_analyzers_sch.pdf/download.html#dl Bob N5TX

Hi Don, many thanks. I emailed to MFJ in parallel and I got short reply "schottky diodes surface mount 2820s"... Which is surprising me a bit as I expected some damage around the power supply