I Would also like to add that when re-installing both the RA Shaft, and
the Dec Shaft into thier respective housings to carefully, and slowly
slide these back in, maintaining proper alignment, as not to bang the
Rollers Bearings in each of the Housings.
The difference you will see, and feel in your mount will be
unbelieveable.
The G-11, (And the GM-8) are very easy to relube,
The HGM-200 takes a bit more work, but it is not much harder than the 2
previously mentioned. (Saddle Plate must be removed..4-Bolts, and then
a Large Snap ring has to be removed to access the Dec Bearings) Mark
