开云体育

Unable to fully tighten dec axis on GM811G

Glenn All Messages By This Member #71192 I am unable to fully tighten the dec axis clutch on my GM811G. There's a quarter-inch play in either direction when the clutch is tightened down. Does anyone have a similar problem and is there a fix?
Brian Valente Member Profile All Messages By This Member #71193 Hi Glenn Is it possible for you to post a video of what you see? Depending on what you see, you might be talking about two different things If it's actually the clutch, you may have oil or grease on the clutch pad If it's the spring-loaded worm, it could just be the spring-loaded worm mechanism moving (although i'm not sure how you could show 1/4" movement there) is it possible you are grabbing the end of the counterweight shaft and moving it back and forth?? toggle quoted message Show quoted text On Sun, Apr 4, 2021 at 9:48 AM Glenn <glancey3@...> wrote: I am unable to fully tighten the dec axis clutch on my GM811G. There's a quarter-inch play in either direction when the clutch is tightened down. Does anyone have a similar problem and is there a fix? -- Brian? Brian Valente portfolio
George Shoup All Messages By This Member #71228 To me it sounds like some spacers or wavy washers are missing.
Jim Waters #71229 My money's on the Spring Loaded Worm assembly. ------------------------ Jim W Phoenix, AZ. USA

Previous Topic Next Topic