开云体育

There is a built-in polar alignment aid on the Gemini II. Gemini II PAC Here’s the YouTube video for Polar Alignment Correction built into the Gemini II. https://youtu.be/yYiHldJ5CKA

are you and Deric comparing notes? :) Just to clarify, the alignment routines for building a pointing model ('align' in gemini hand controller) is completely separate from polar alignment. The 'go

I can only speak for my limited experience with my fairly new Gemini 2 on my GM811G HD. Yes, there is a PA routine. For me, it has not worked. It tells me to pick two stars, then goes to star #1. Then

or you can even just use the imaging scope! david.partridge@...> wrote:

Deric FYI polaris is not a good target to align on - it's at the pole Also that alignment process is different than polar alignment polar align = adjust alt/az physical adjustments until it's

Hi Tim Yes, Gemini has an alignment routine, i think they are all very similar Brian [email protected]> wrote: -- Brian Brian Valente portfolio brianvalentephotography.com

Hi Tim yes there is a polar alignment routine built into Gemini That being said, the third party options for polar alignment are so good nowadays, it would probably be easier and more accurate to

I forgot I just do the Fast start. Deric. Sent from my Boost Mobile Phone.

Give up on polar scope, - just stick a camera in the finder scope and use SharpCap - way simple to use and accurate. David From: [email protected] [mailto:[email protected]] On

Tim, on a basic level Polar align. I center up Polaris right where all the lines converge in the polar scope.I Goto bright Star center it in the eyepiece using the hand controler, (do not touch the

I sold my CGEM which had a routine in the hand controller. ?After a two star alignment you could goto a star then use the mount RA Dec adjustments to center it. ?I was wondering if Gemini had

Tim, Google up "Kenko polar finder instructions" if you are going use the Losmandy Polar alignment scope. Then I do a drift alignment I'm only visual. I think otherwise most people here on this Group

Folks looking to buy a G11 with Gemini. ?I looked through the manual on line. ? Couldn’t find a polar alignment routine. ?Is there a routine for accurate polar alignment? ? Thanks -- Tim

Hi Guilherme for the 492 controller there are no updates you might just want to pull it out, exercise the RA and DEC (slew around on both axis) and see how things work. I don't know how you stored

Hi I have an old GM-8 Mount with the model 492 controller which I haven’t used for a good 6 or 7 years and I wanted to give them a shot again now that I moved to a darker place Question is I

We seem to be at RAMPS ( RepRap Arduino Mega Pololu Shield) v. 1.6 currently. A shield is a mass produced circuit board that is designed to be used by stacking with an Arduino development board. See:

Okay thanks Sonny btw regarding the software i mentioned, my plan was to use SGP *as an example*, but many of the concepts and settings would be similar, such as plate solving inside NINA and btw,

Personally, I don't need help with PHD2, got that nailed my first year. PEC is not a problem for my GM811G HD. Either I am blessed, or my methods have not called for dabbling with it. I'm curious, I

I have my system mounted in an observatory, and put velcro on all four sides of the pier, so I can put the controller on the nearest side I'm on while fiddling with the scope locally. -- Doug

I'm interested in all three. If you want to do one before the other that good with me. But I would like to see all three. Thank you for asking. I probably won't be able to see it on zoom but if you