开云体育

Mark do you have any non SCT scopes to test with at a similar 0.5 degree? FOV? I ask this so we can eliminate mirror shift or focuser shift which is common even in the EdgeHD scopes which is why I

I went through all of the suggestions made, and collected those that seemed might possibly be connected to my problem. Then I implemented them. Last night was a test. I carefully determined the CWD

That's a solidly good deal, I purchased similarly priced mint example of GM8 in that price range. The best deal I ever got was a minty GM8 with a lighted rocker switch Gemini 1 and LWT like maybe 7

Ken, Not sure how much of a difference in it makes but my LWT is the older style with push button adjustable lever handle type upper leg locks and came standard with the leg spreader limiter. I also

Thanks Chip, George - all good suggestions. Ken

I paid $700 for a GM8 that was late enough to have the precision worms. Don't forget the MA Losmandy to Meade HD field tripod adapter. Combo should cost about half the price of the GM8's tripod.

To the OP It seems to me that your pointing errors on slewing are mechanical. Is the scope balanced in RA and DEC? Have you tried slowing down the GoTo speed to see if things improve? Mechanical

Mark, I have always downloaded the file to a microSD card and then swapped it with the microSD card from the case. The instructions are here https://gemini-2.com/Removing_SDCards.html

Hi Frankie, Look at the pics of your setup, I noticed your guide scope is in a fixed saddle. When in this configuration, you have no latitude to center the guide scope with the center of the imaging

Hi Brian, Thanks for the reply. I just sent a support ticket request to the address you indicated. Thanks, Frankie

It's in astroberry now as well. -- jamie.amendolagine@... https://astropifi.blogspot.com/ https://telescopius.com/profile/james_amendolagine

Hi Frankie can you please open a support ticket with us - there are some things you are doing and some advice you are getting that i think is outdated techsupport at losmandy dot com thanks Brian

Mark go into your HC ( https://gemini-2.com/hc/En-networkmenu_A.html ) and check the network settings.?? Note this has an address of 192.168.0.150 not the normal 192.168.0.111 because the DHCP has

Yes, it's the current official release. We are in beta on L6

Got it; mine’s 5.21. Is that current? Or at least current enough? Sent: Monday, August 15, 2022 12:35 PM To: [email protected] Subject: Re: [Losmandy_users_io] Usability Question Mark that's

Mark that's the hand controller version. the gemini version would be something like 5.20, 5.21, etc. -- Brian Brian Valente astro portfolio https://www.brianvalentephotography.com/astrophotograph

I agree; I am very grateful for all the time people have put into helping me. But this thing refuses to do its part. BTW, my Gemini 2 is on version 1.20, March 12, 2017. Is there a more recent version

Bear with me while I try to scrape myself off the ceiling. I do hate practically everything about this mount and its electronics! With that out of the way…. Since it had been two years since I had

Well, I already found the solution for the sidereal speed problem and not being able to make an alignment, it was my mistake when entering the coordinates in their place, although they were the

Oh, forgot to mention that if going strictly visual you should look for a used GM8 with a #492 digital drive and spend the money you saved over a Gemini on the Nexus DSC. If you shop carefully you