开云体育

Hey Guys, Maybe I missed it, but is there any kind of lubricant that works better than another when re-lubing the GM-8/G11 mount. Would White Lithium be best? I also heard that green bicycle

GC, I would get the 11 pound counterweight. The M603 *will* work with the 7 pound weight, but it will probably put the counterweight at the very bottom of the counterweight tube (at least this is

Regardless of the hoopla, the price of the system is quite amazing. Consider the following based on Pocono's pricing. G-11 Package with Polar Scope $1895 G-8 Package with Polar Scope is $1449 G-8

There are a couple of ways to answer your questions. First the easy one. The Vixen (VC-200L) is a Vixen modified Cass and looks similar to a C8 with no front corrector plate. By itself on the GM11

Thanks for the response. With just the VC-200L (what is that anyway--never heard of it) mounted how much extra weight do you need if it's mounted directly on the G-11 adapter (no DSBS)? And if the

Eddie Trimarchi wrote: I'm sure I can pull them up and look at them again in the binaries

havriliak@... wrote: Here are the instructions from the Losmandy web site: The Polar Axis Finder is designed to minimize polar alignment set-up time while maintaining

Hi Rockett, All of the images I have taken with the C11 this year has been with the SW2 control system. I have posted them to abpa over the months, but as yet don't have any one my web page. If you

Thanks, Karl. I believe my mount has the "high precision" gears. When I bought it, the seller told me it did, and I called Scott to confirm. He said that if the polar gear was black, it's HP. I

eddiet@... wrote: Eddie, do you have any images on your web site taken with this new drive yet? Rockett

Greg, By drive corrector, I mean just a hand paddle with the ability to control the drives at varying speeds. Similarly to the standard Losmandy drive system. Astrometric have implemented TPoint

I have been using the Skywalker II from Astrometric instruments on a G11 for months now and it is a fantastic system. It needs a computer for full goto control, and is compatible with theSky V5.

Eventually, I received my polar alignment scope for the G-11 from Pocono Mts. Alas, there were no instructions so I tried to figure it out. I thought I did but some evidence indicates that I

I am using a similar setup. GM8 with G-11 adapter and a DSBS to confuse matters a little. My options turn out to be a VC-200L (About the weight of a C-8), a Questar Duplexs in Losmandy rings and/or a

I'm just about to finally order my GM-8 and was wondering about counter weight recommendations. I'm putting a M603 on it. It's weight is speced at 12.5 lbs on ITE's site. Markus, with his usual

Eddie, I understand that the Losmandy GOTO upgrade will have its own version of TPoint. Does the Astrometrics version have something similar? Is this what you mean by drive corrector? Greg

Finished processing more of my images from the last week at ARGO. I have arrived at the conclusion that there is no escaping the need for lots and lots of exposure at f/8. Some of the newer images

With all the hoopla about the new GOTO Losmandy system I wondered if anyone else used one of the other aftermarket Losmandy GOTO retrofits like "AIM Control" (http://www.qei-motion.com") or

Hi Paul - I bought mine about 10 or 11 years ago at Riverside. It is serial number 0016. I have an early drive gear. I know this because at the time I bought it Scott offered to install a "new" type