开云体育

Hi Edward, Scott may confirm, but my supplier here in the UK tells me October for first shipments. CS, Ian. wrote:

Secondary system question please: already own a DM10 plate for the G-11, but would like to use it for double duty with 6" A-P rings. Other than the whole pattern, is the DM10 identical to the DAP6

Boys! Take a look at this page: http://www.ozemail.com.au/~atsscope/goto.html It looks lovely (at a price. :p) When will it be available? Edward Tam

I've recently ordered an Intes MK66 Mak-Cass scope and hope to mount it on a GM-8 mount. I've been told that the universal dovetail plate doesn't match up to the MK66 and has to have minor

Hi Karl, It's good to hear from another GM100 owner. How do you find the tracking accuracy of your mount? Any tricks that have improved it? Any tricks to improve (remove slop from) the DEC tangent

I thought someone would pick up on that; and if I remember correctly someone posted that they thought that Scott was not too impressed about the teflon fix in general. I wonder if he has since

I also have the GM100 and ST-4 and do not use the PEC. It seems to work fine without it. wrote: suggested take care ST4. for understanding try to that I

Bishop Where near Bishop? My club will be going to Grandview campground in the White Mountains later this month.

Years ago, I was a subscriber to the APML list. Most folks there suggested that I leave PEC turned off when autoguiding- let the autoguider take care of all corrections. That's how I currently use my

Milton, I think it's 3.5" OD by 1.25" ID and .031 thick. Not quite sure about OD but it did measure it and that's what I remember. Don

Hi Greg, I do not use the King tracking rate. My impression was it works for low to the horizon shots. Since I do not have a complete understanding of it, I have never tried it. I have not tried the

Does anyone know the exact size of the supplied nylon washer? I guess I can find out by taking the head apart, but would rather see if anyone knows. Thanks, Milton <snightingale40@h...>

Tom, After another night fine tuning my G11 I still have not achieved your guiding error rate. So I'll keep trying. :-) Two more questions: Do you use the King tracking rate? Do you find that

Hi Gil, The very first day I had my HGM-200 mount, I immediately knew it needed lubing. As you mention, the RA bearings are easy to inspect, and re-lube. If you have noticed that these bearings

Signing off for 10 days ...going to look at some property near Bishop Cal for my 30inch observatory site...OK, actually looking at retirement property, but with the 30 inch in mind. Clear

Mark wrote:

problem with Scott issue: the resistance. which was Gee, this sounds familiar....so Scott has already had this fix in his bag of tricks for the G9. When I emailed him about replacing the nylon clutch

--- Jack Metcalfe <jlmetcalfe@...> wrote: Hi Jack. Congrats on getting back into the hobby! I recently acquired an older CG9 (the C9.25 on a Losmandy G9 mount) and really like it. The C9.25 seems

Hi Jack, From my limited understanding, the GM-8 is a fine mount for the C9.25. David Silva uses exactly this setup, and is quite happy. Robert.

A couple of questions and hopefully some recommendations from the group. It's been quite a while since I've had a scope for observing, but the bug has bitten again. Years ago, I had a Cave Astrola