开云体育

Joe, I’m not great on things like guiding but I do know I have read of issues with this very same camera QHY5ver2 Search all the the Gemini forums. Here’s one to start

Hello All. I have an issue with Astroart 8 and my G11 Gemini 1, specifically AA8 calibrating commands not getting to the mount, or that’s what it seems like anyway. I have a QHY5Lii guide camera

Hi George, A ticking while slewing does not necessarily mean a problem with tracking and guiding. Since you are in slew speed, it's hard to say where a 0.5s noise might be coming from. You may want

I have a G11G and the DEC was making a clicking sound when slewing under load.? I used one of these to isolate the sound.? The SLW needed

I just received a new Titan axis upgrade for the Losmandy G11. It is a beautiful piece of kit. After balancing the axes and selecting the G11T in the hand controller, I moved the mount on both axes to

Interesting you're dissatisfied with the 858D. I too have one of those plus additional nozzle. Don't use it for anything really sophisticated but find it quite well suited for the occasional job of

“Yeah and clean, well ? ? ? ? organized workplace.” Hahaha I start every job with a clear desk …..end up looking like that. ?Only takes a few hrs! George, you use “Dexion storage

Joel, I did this same thing several years ago. I pulled the MAL adapter head off the tripod and bolted it to the top of my pier with the center bolt hole. However, I did use a rat-cage with two

Yes? - same as the top of the extension that secures the mount - https://store-losmandy-com.3dcartstores.com/ex-12

How did you get a photo of my desk???

Yeah and clean, well organized workplace. [image: image.png]

Well the UART jack is a RJ-45/12 with 8 conductor connections. Minium UART requires TX, RX and ground connections. You need to know which connector on the plug gets which signal. Here's the pin

Just so I'm clear, the three bolts from the top of the base/pier adapter hold the extension in place? Thanks, Joel

Here was my first attempt at Gemini dsPIC33 removal (with Brendan's invaluable help) :)

I've seen worse. "Oh look, I can see its brains." Some politely smoke, others go Krakatoa! I continue to be amazed at how little solder is needed to mount a, say 8 x8 mm IC. I find if I cut factory

In the law we call that "forum shopping." It's considered poor sportsmanship, unless it's your case.

Good points. The C11 was being weighed for shipment to Moldova, so no, it wasn't loaded with accessories.

Is anyone in the UK wanting to unload a Titan (or even an HGM-200)? If so, I'm interested. I will do a swap for a G11 plus whatever if you're down-sizing. Cheers, David Please click here to

Visual to add to Edwards reply (Base/Pier adapter and Extension)

extends -- Edward