开云体育

I have a Meade 12" I use on my G11G.? The atmosphere is your enemy.? ?Mount will be fine

I had some black oxide set screws in my screw drawer this whole time. I am glad I had not ordered any yet. The factory screws were hard to get out as the allen hole was a bit too big, but they are all

As I was attempting to move the gears in, the allen wrench I was using was stripping out in the set screw. Also, there is some in and out play on the shaft which I guess is what is causing it to rub

Your spreadsheet - and the LM video w Brian - has been a great help to me a couple of times, Edward. Thank you for the update on those settings. Geoff

Mine don’t rub against the covers but they are covered in grease around the periphery. The grease is somewhat normal as the gears push some of it away when meshing together. Rubbing against the

I can see that the greasy gear is not in as far as the other one is on its shaft. I can also see that the 2 gears do not line up with each other because of this slight offset. I don't see this on

I am adjusting my worm gears and I notice that the face of the gears that are connected to the servo motor are covered in grease,?and they must rub on the cover. Is this intentional?

direct link: /g/Losmandy_users/files/Edward-Gemini-NINA.xlsx

Its in the “Files” section of this group. Seach for the name since it is a few pages down. The accompanying power point slides (separate file, similar name) gives explanation of how it works --

Can you provide a link to this spreadsheet - I don't know where it is. Thanks. Mike

I uploaded a new version of the spreadsheet "Edward-Gemini-NINA.xlsx" This includes suggestion to enable "Report Pier Side" and "Flip using Goto" per a recent thread on the Gemini group. -- Edward

I've got a spare "D" G11 saddle. Glad to donate it to the club. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> Virus-free.www.avg.com

Many thanks to all! Given all the potential issues, I'm in contact with Michael Herman - thanks for the suggestion, John. Will update when we're all done - and operational! Thanks! Dale

No problem.. Also, for anyone who cares, once I can find it (in storage or in an as yet unopened moving box), I will have a MA Adapter fr sale if anyone needs one.. Come the decent (expected) weather

Dale, Sounds like your mount needs a trip to Micheal Herman in CA. If the mount was that gummed up, the running on frozen bearings probably led to

Thanks Derek. I've replied separately to you. Thanks for the GFT and MA adapter testing offer - I have a Losmandy LW tripod from my GM811G for testing currently. Dale

Dale.. Check your Junk mail folder, as I've replied to you a couple times.. If you've answered, I may not get it for awhile as I am streaming Sharks Hockey.. Additionally, if you want to borrow my

In our initial testing, we only bench tested the mount standalone, after doing some temporary repairs on the Gemini-1. We took the RA and Dec axis apart to clean and re-grease before anything else, as

Have you tested, actually used the mount yet? Tracking Goto ...etc ------------------------ Jim W Phoenix, AZ. USA Losmandy G11G w/ L6, NINA 3.0 / ASTAP, ASI2600MC Pro, Sky-Watcher Scopes, Canon L

My club has recently obtained a maybe 2010 era? G11 with Gemini-1 controller, untucked servos, OPW, and pretty gummed up bearings and axis shafts. We debugged the Gemini a bit and got it booted,