开云体育

Hi John, If you are going to image and going have a computer with you it is hard to beat using a PoleMaster, SharpCap etc. to polar align your mount. If

If you separate the RA and DEC but only use one case you run the risk of damaging them. Keep the mount halves assembled and pad out or build a simple plywood frame and staple indoor outdoor carpet to

The app PS Align for smart phones has the reticle design for the Losmandy polar scope and for most other manufacturers as well. However, I've never used one. With PoleMaster and SharpCap being so easy

Hi All I'm looking at making a custom carrying case for my G-11. It's highly unlikely, I know, but does anybody have a drawing of the mount that can be imported into something like VCarve so I can cut

I think it's not an issue of MCU clocking, the ESP32 is clocked at 2.4mHz and the Teensy4.1 at 1gHz. 1kHz is the maximum speed that a step motor can practically be driven due to torque falloff. At

Thanks - I use sharpcap's electronic polar alignment, but like having a back-up polar scope just in case. Too bad the G11G's polar scope doesn't have the graduated circle option.

Hi John I have a G11G with all the options including the polar scope. It is disappointing compared to my EQ6-R's polar scope which I love. There is no graduat

IMHO you would be better using something like Sharpcap for polar alignment. It’s really easy to use … Sent: 07 January 2024 12:10 To: [email protected] Subject: [Losmandy_users_io]

When I bought my G11G I bought the 2 cases for the 2 parts of the G11 if you get the RA extension. It was cheaply made plastic. I returned it when I went to NEAF. It is not on their website anymore,

Hi John, Considering all the responses and that I am late to the party; I think you have a lot of useful information. Actually, I may be able to learn something too.

What is the best option for a carrying case for the G11G? Is there one commercially available, and if so, can someone post a link to it? I have heard that the RA axis needs to be disassembled from the

I am considering getting the illuminated polar scope that is an option for the G11G. Does anyone know what the reticle looks like? I am hoping it is just a simple 360 degree circle, so I can use the

Thanks everyone- I really appreciate the info.

Thanks again Ken-? the screen shot really helps. From the picture it looks like I will need to use a baud rate of 9600 with the G11G. My Skywatcher EQ6 mount/EQMOD uses a baud rate of 115200.

I have been trying to find out the sub-second dynamics of my G11S with OnStep for which a guide error log is sampling too slow.? The only way I could think of was to create star trails using the hand

My G811G works great with ASCOM driver selected in Sharpcap and Cartes du Ciel (CDC). Using those for four years now. And, of course PHD. I polar align with Sharpcap and then do plate solve with it.

Hi I may be able to help. I bought mine last spring and use Stellarium and SharpCap also. I will be home soon Pete Sent from my Verizon, Samsung Galaxy smartphone Get Outlook for Android

Enter in the hardware tab and the Gemini.Net should be available in the roll down selection per below. The Properties button allows you to set what interface you are using to the Gemini.Net setting

Thanks Ken. This is very helpful! Question... in the sharpcap settings page, any idea which tabs I would need to enter info into? Maybe the hardware tab? I can look at each tab if/when I get the

John, I use the ASCOM Gemini Telecope.Net driver - http://gemini-2.net/# ( http://gemini-2.net/ ) (Under the Ascom section) Video here - https://www.youtube.com/watch?v=T0ToxbxwpTc SharpCap just needs