开云体育

Let's come back to the calibration so as to not mix too many issues. ? But, just a note that the erratic movement is without / before I started working on PEC. ?PEC is off. ? I'm trying to get to a

Jim, I have an i5 NUC 8 system and it shows the same Device Security error but it is related to Core Isolation (ala Virtualization security protection) and not due to the QHY system. I have the 168C

My laptop has an Intel 11th Generation Core i7-11800H CPU.? I am not sure where Core Memory Isolation begins.? My laptop now tell me I have a security issue. ------------------------ Jim W Phoenix,

interesting, thanks Jim what's considered a 'current generation' intel cpu? i have a few beelink running intel N5905 and polemaster and it's worked okay for me

I imaged for the first time in 3 months because of monsoons and other things last night.? When I tried to PA using my PoleMaster the device driver wouldn’t load and I couldn’t do PA.? I gave up

This type of encoders are great for turning manual Alt-Az mounts or even dobsonians into semi-goto systems.? For a GEM, once you have goto capability its cost and hassle is hard to justify. OTOH, a

Hi Michael I had a recent few months where I used metaguide intensively, both to see if it was better than PHD, and also to learn its approach to guiding (it's also a great way to fine-tune

The mesh network may be causing issues I suggest you try plugging in the Gemini via ethernet to your main router's ethernet port and see if that works erratic movement/steps in both RA and DEC, more

A couple more data points ... * I've confirmed that my laptop with WiFi turned off can also connect to my home network via the ethernet cable connected to the Google WiFi unit's LAN port * I am able

Yes, I recently installed them on my G11G, but only so the mount would “know” it’s position after a push-to. They work just fine for that, but don’t in any way interact with the standard

Are there any Metaguide enthusiasts among us?? I briefly confirmed that it works with my GM811G, but I have no feel for how it compares to PHD2 (I did only a brief test).? I have already confirmed

I'm connecting the Gemini-2 ethernet port to the LAN port on one of my Google WiFi mesh units:

What do you mean by adapter? [email protected]> wrote: -- Brian Brian Valente astro portfolio https://www.brianvalentephotography.com/astrophotography/ portfolio brianvalentephotography.com

Hi Brian, I followed the video, but no luck. ?I did check that that wireless adapter works to connect other devices in my house to my home network?(e.g., TV)?and I'm using the exact same adapter

Hi Bret just typing in the IP address isn't going to work. your Gemini isn't getting its ip address from your router, so something isn't connecting correctly Make sure your router is fully powered on

Hi Folks, I'm trying connect to Gemini via ethernet to see if that resolves my issue. ?I have Gemini connected though a WiFI adapter to my local home network, but I'm not able to connect to Gemini.

Hi Mengan, These encoders are for use with a digital setting circles computer. They cannot be used for guiding. If you have a guiding issue please post what you are using and what the problem looks

discover that TVC only works when the Speed is set to "Guide". Yes, that's correct Sorry i re-read the op which I thought was guide mode, but i missed the center part. TVC only affects guide speed --

Brian, I once tried adjusting the TVC value for this very issue, only to discover that TVC only works when the Speed is set to "Guide". Can you confirm TV works when speed is set to "Center"? -Bill

I would also suggest replacing the coin cell in the Gemini-2.? If somebody told me their Gemini-2 would partly boot up and then get hung, that's what I'd think the problem is.? It's possible your